[ROM][UNOFFICIAL][6.0.1][E5823/E5803] CyanogenMod 13 for the Sony Xperia Z5C [BETA]

[Berni-0815]

I'm using stock blobs from an existing system.ext4 file for 6.0.1 (E5823_32.2.A.5.11)

 

[nzzane]

I'm using stock blobs from an existing system.ext4 file for 6.0.1 (E5823_32.2.A.5.11)

Do you have the correct proprietary files in "vendor/sony/suzuan"?

 

[Berni-0815]

I think so. I had a look at sumire's files and adopted it to suzuran. For that I used "extract-files.sh" in the device tree and eliminated missing or wrong (placed) files. With that the vendor files are created.

 

[nzzane]

I think so. I had a look at sumire's files and adopted it to suzuran. For that I used "extract-files.sh" in the device tree and eliminated missing or wrong (placed) files. With that the vendor files are created.

That's weird then
Just to confirm the proprietary files should be the exact same as this:
https://github.com/nzzane/lineage_device_sony_suzuran/blob/cm-14.1/proprietary-files.txt
Although I still don't have WiFi or nfc working

 

[Berni-0815]

Just to confirm the proprietary files should be the exact same as this:
https://github.com/nzzane/lineage_device_sony_suzuran/blob/cm-14.1/proprietary-files.txt

I know your work. But there is something I don't understand: At line 838 you have a

bin/tad_static

but in the original rom there is no file tad_static...

 

[nzzane]

I know your work. But there is something I don't understand: At line 838 you have a but in the original rom there is no file tad_static...

Oh yes, tad_static is inside the ramdisk, check /sbin
Either unpack the stock kernel and inside the ramdisk, or /sbin

 

[Berni-0815]

Hmmm. I only searched in the system.ext4 file. Thanks...

 

[nzzane]

Hmmm. I only searched in the system.ext4 file. Thanks...

No worries, might help with some of your issues

 

[Berni-0815]

Ok, these are the files that I can't find.

bin/tad_static
lib64/lib-preload64.so
vendor/lib64/libril-qc-ltedirectdi
vendor/lib64/librilqmiservices.so
vendor/lib64/libsettings.so
vendor/lib/libmmcamera_pdaf_v3.so
vendor/lib/libril-qc-ltedirectdisc
vendor/lib/librilqmiservices.so
vendor/lib/libsettings.so

I'm using this rom for my z5c: E5823_32.2.A.5.11_1298-1220_R2C
And I extracted every file from this rom that contains an ext4 file.
Where is my fault?

 

[nzzane]

Ok, these are the files that I can't find.

I'm using this rom for my z5c: E5823_32.2.A.5.11_1298-1220_R2C
And I extracted every file from this rom that contains an ext4 file.
Where is my fault?

Lib-preload64 is https://github.com/TheMuppets/propr...m-14.1/ivy/proprietary/lib64/lib-preload64.so
Not actually on the stock device
Tad_static should be in /sbin of your device (unpack the kernel and have a look in the ramdisk)

The others I am not too sure about in all honesty, but the two mentioned above should be the main ones you need

 

[Berni-0815]

My fault is found; it's simple: All files except tad_static are part of nougat. So I can't use them for a mm based rom.
And tad_static is found in the unpacked kernel.elf. In Germany we say: "Den Wald vor lauter Bäumen nicht sehen!". This is not translatable, but it means to see nothing with open eyes...
Thanks a lot for your help.

 

[Berni-0815]

Here is my latest build dated 27. march 2017. Not very much improvements, but there is a security patch level dated 01. march 2017...

As usual, fingerprints, fmradio, voice calls over bluetooth and nfc are not working! No way...

I'm using this rom as daily driver, because the general bluetooth function works much more stable than in stock rom! I.e. hearing music and getting navigation informations in conjunction on my bike are working fine and the music player is not crashing after a navigation info. At all tested stock roms it crashes often while doing that. Now and then the bluetooth connection to my headset is lost completely so I have to reactivate it while driving...

All this is now gone with my LineageOS build :good:

Try it at your own risk!

 

[miir01]

My fault is found; it's simple: All files except tad_static are part of nougat. So I can't use them for a mm based rom.
And tad_static is found in the unpacked kernel.elf. In Germany we say: "Den Wald vor lauter Bäumen nicht sehen!". This is not translatable, but it means to see nothing with open eyes...
Thanks a lot for your help.

"Den Wald vor lauter Bäumen nicht sehen!" => Can't see the wood for the trees.

Thanks for all your work for the community. Cheers.

 

[Macsek]

Here is my latest build dated 27. march 2017. Not very much improvements, but there is a security patch level dated 01. march 2017...

As usual, fingerprints, fmradio, voice calls over bluetooth and nfc are not working! No way...

I'm using this rom as daily driver, because the general bluetooth function works much more stable than in stock rom! I.e. hearing music and getting navigation informations in conjunction on my bike are working fine and the music player is not crashing after a navigation info. At all tested stock roms it crashes often while doing that. Now and then the bluetooth connection to my headset is lost completely so I have to reactivate it while driving...

All this is now gone with my LineageOS build :good:

Thanks for both ROMs, Berni-0815.
I loved CM ROMS in the past, this one is close: fast enough, good general usage, but I have experienced random reboots now and then, had too low volume problems in phone sometimes, camera ceased to start half of tries. I will try another ROM. (definitely not LineageOS as non-working WiFi is a deal breaker for me)
I hope you continue supporting these ROMs and somehow all faults will be solved.
Friendliche Grüße

 

[Berni-0815]

Here is my latest build dated 07. April. Very few changes, but the caller volume is much higher than before.
And I used another driver for wlan and bluetooth...

 

[Berlambert22]

Here is my latest build dated 07. April. Very few changes, but the caller volume is much higher than before.
And I used another driver for wlan and bluetooth...

Hi Berni and thank for the link,
I try this rom lineage-13.0-20170407 in your link,
All it's good for me exept an echo on the other caller-side

Do you have a soluce for this ?
Or other rom type lineage13 ?

May be editing the mixer path.xml ?

 

[Berni-0815]

The echo on the other side is a known problem and I have no idea how to solve it. I tried using the stuff from LineageOS 14.1 but with that I can't build a rom successfully.
Therefore I stopped working on this rom. For doing more I have not enough knowledge about android development.
Sorry... :crying:

 

[bizon1]

Hi, could somebody create port of cm13 camera with all required libs and blobs to stock rom? It's a bit weird because my camera did't work (it can't focus at all even with restored TA, after module replacement) on stock rom and lineage which have stock based camera. On cm13 camera is working fine. I would like to have a stock rom with working camera. Please help.

 

[umz_786]

Hey guys

i got a Z5C and wanted to ask how the development of CM13 is coming along? Is the rom being updated regularly to try and get to a RC or stable build? I want to use it as my daily

Thanks

 

[Marco20]

Hey guys

i got a Z5C and wanted to ask how the development of CM13 is coming along? Is the rom being updated regularly to try and get to a RC or stable build? I want to use it as my daily

Thanks

Rom is outdated and not supported anymore. Try lineage os.