[ROM][UNOFFICIAL][7.1.2] LineageOS 14.1 - 20200511

[lee.wp14]

DISCLAIMER
By using this ROM, you agree that the developer is not responsible for any physical damage caused to you or your device, or non-physical damage which includes but not limited to:
- broke up with gf due to missed phone calls
- got fired by bossku due to missed alarm
- drove your car into the sea due to faulty GPS
- got caught while traveling in Japan because your camera has no shutter sound
- got last place in kahoot quiz due to device lagging
- accidentally fried the egg due to device overheating
Continue to read this thread only if you agree.

LineageOS 14.1 for Samsung Galaxy Note N7000
Beware, you are about to enter a danger zone!

​

ABOUT
This is more of like a learning attempt, as I never build cm-14.1 for n7000 before. Besides that, I think that it might be useful if I can rework the device sources to make it more proper and organized. I hope this build with new security patch will benefit people who wants to stay on cm-14.1.

CREDITS
All my builds are fully based on works by @rINanDO, @bauner, @ChronoMonochrome, fourkbomb, numerous n7000, Exynos4 and LineageOS developers. Full credits goes to all the developers. I hope no one is being left out, please notify me if there is.

INSTALLATION
All my builds are emulated storage capable. Repartition is required to install my builds.
And also, please backup EFS partition and store in a dry, safe place.
The below instructions assumes that your device has TWRP IsoRec installed, and all your data will be destroyed in the process.
1. Choose your desired emulated storage partitioning configuration:

- Android 9/10 capable: lanchon-repit-20170115-system=1.5G+wipe-data=max+wipe-sdcard=min+wipe-preload=min+wipe-n7000.zip
- Android 7.1.2 capable: lanchon-repit-20170115-system=1G+wipe-data=max+wipe-sdcard=min+wipe-preload=min+wipe-n7000.zip
* Emulated + Non-emulated Internal Storage: change the values of -sdcard=min+wipe to -sdcard=4G+wipe, where 4G is your desired non-emulated Internal Storage size.

The last option provides best compatibility, as non-emulated storage ROMs will work as intended on such partitioning, and emulated storage ROMs will detect the non-emulated storage as an SD Card.
This allows you to switch back-and-forth between emulated capable and non-emulated capable ROMs without repartitioning.​

2. Reboot into recovery. Flash emulated storage capable TWRP IsoRec (flash as Image to Recovery): i9100-LOS-16.0-Emulated-Storage-TWRP-3.3.1-1.img
3. Reboot recovery. Flash i9100-to-n7000 TWRP conversion: lanchon-twrp-patcher-20160417-n7000.zip
4. Reboot recovery. Flash the repartition script that you have chosen in Step 1.
5. Reboot recovery. Wipe /cache, /system, Non-emulated Storage. Then, run Format Data.
6. Proceed to flash my builds.
7. Flash ARM nano GAPPS and SU if desired.
8. Prepare a coffee or tea and sit back on your couch. Reboot system.

DOWNLOAD
Icedrive

XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy Note GT-N7000

Contributors
lee.wp14
Source Code: https://github.com/hikuii

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP 3.3.1-1 (Emulated Storage Compatible)
Based On: LineageOS

Version Information
Status: Testing

Created 2020-05-11
Last Updated 2020-05-26

 

[lee.wp14]

LineageOS 14.1

LATEST BUILD
lineage-14.1-20200511-UNOFFICIAL-n7000
kernel-4c4d93693090e956abb234bca54368d46be42981

NOT WORKING/UNTESTED
- GPS/AGPS: untested
- DRM: untested

BUILD-SPECIFIC NOTES
- CPU Hotplug is disabled, please monitor battery usage.
- Thermal throttle for CPU is set to 1.2GHz at 69C, stop at 64C. Memory is 90C and stop at 85C.

INSTALLATION NOTES
- Nougat builds have DEXPREOPT disabled as it breaks the system on Exynos platform. Thus, first boot will take longer than usual.

CHANGELOG

20200511
- Initial build.

​

 

[lee.wp14]

Reserved

 

[sinister_virus]

Thats great

 

[Adham_android]

plz help me i m stuck at flashing the script

Reboot recovery. Flash the repartition script that you have chosen in Step 1.

every time i flash the script Android 9/10 capable: lanchon-repit-20170115-system=1.5G+wipe-data=max+wipe-sdcard=min+wipe-preload=min+wipe-n7000.zip
- Android 7.1.2 capable: lanchon-repit-20170115-system=1G+wipe-data=max+wipe-sdcard=min+wipe-preload=min+wipe-n7000.zip

i try it the first didnt work also the second i mean i didnt try it together but i mean non of thes files working

there is an error says unable to mount all partions from sd card
same massege from memory card i tryied everything but didnt work man

installing from internal didnt work '
installing from memory card didnt work ???????????

 

[lee.wp14]

plz help me i m stuck at flashing the script

Reboot recovery. Flash the repartition script that you have chosen in Step 1.

every time i flash the script Android 9/10 capable: lanchon-repit-20170115-system=1.5G+wipe-data=max+wipe-sdcard=min+wipe-preload=min+wipe-n7000.zip
- Android 7.1.2 capable: lanchon-repit-20170115-system=1G+wipe-data=max+wipe-sdcard=min+wipe-preload=min+wipe-n7000.zip

i try it the first didnt work also the second i mean i didnt try it together but i mean non of thes files working

there is an error says unable to mount all partions from sd card
same massege from memory card i tryied everything but didnt work man

installing from internal didnt work '
installing from memory card didnt work ???????????

Not sure what you mean by that error mentioned. Can you attach some pictures for reference?

 

[Adham_android]

Not sure what you mean by that error mentioned. Can you attach some pictures for reference?

https://b.top4top.io/p_1607stgxn1.jpg

 

[lee.wp14]

https://b.top4top.io/p_1607stgxn1.jpg

The logs are pretty self-explanatory, repit requires you to run from /tmp. When the location of repit is to be unmounted during repartition, it will fail and require you to flash again from /tmp.
So you just copy the zip file to /tmp and flash from there.

 

[Adham_android]

The logs are pretty self-explanatory, repit requires you to run from /tmp. When the location of repit is to be unmounted during repartition, it will fail and require you to flash again from /tmp.
So you just copy the zip file to /tmp and flash from there.

i opend the file manager and go to /tmp and i found the script file there i didnt copy it so i try to install but didnt work the same massege appears ?

second question : tmp folder located in which storage exactly ?

 

[lee.wp14]

i opend the file manager and go to /tmp and i found the script file there i didnt copy it so i try to install but didnt work the same massege appears ?

second question : tmp folder located in which storage exactly ?

Attach a picture of the error after you flash from /tmp.
Or maybe, manually unmount /sdcard1 and flash again from /tmp.
/tmp is not a storage, /tmp is a linux tmpfs, it is not a persistent storage. Think of it as a RAM.

 

[VashlaK Belarus]

You couldn't just update the assembly from bauner. Security patch. Or can your assembly be put on top of a bauner assembly?

 

[Deleted member 11003139]

Thanks for this ROM this is the most stable rom i have ever used and it gives me excellent performance much better than samsung own touchlagwiz on jellybean 4.1.1 the only issue i have encountered i the horrendrously bad battery life and overheating the phone gets so hot that you can boil a drop of water on it.

Sorry if I wasted your precious time.
Regards.

 

[tuxayo]

Even if it's an older version of Android, this one (LOS 14.1) might give the best experience of the currently maintained (2? ^^" ) N7000 ROMs.

Has anyone used this rom and the LineageOS 16.0 one also from lee.wp14? To have some feedback on responsiveness and RAM usage? To confirm of deny the above hypothesis.

 

[Werve]

Even if it's an older version of Android, this one (LOS 14.1) might give the best experience of the currently maintained (2? ^^" ) N7000 ROMs.

Has anyone used this rom and the LineageOS 16.0 one also from lee.wp14? To have some feedback on responsiveness and RAM usage? To confirm of deny the above hypothesis.

I used that Android 9 ROM but lot of times system ask to close or wait apps not responding, so I think it is too slow for daily usage (even with Lspeed and FDE.ai installed).

EDIT: Unfortunately it seems that it cannot install magisk in this ROM
and actually the Lineage 16 build with the LSpeed performance preset and trimming the partitions seems reasonably performant.