I did find an issue with the second update beta that you can't use finger print censor even if you register a finger print. Maybe its a bug that needs to be sorted out. Pin works but finger print doesn't for me and im on pixel 7 pro.
Development [ROM][UNOFFICIAL][cheetah/panther] LineageOS 20.0 for the Pixel 7 Pro/7
- Thread starter neelchauhan
- Start date
This is a known issue on some other roms, just change screen resolution to 1440p and you are good to go.
If LOS for pantah goes official but it includes gapps in the builds, could you continue making unofficial builds with no gapps by default? really appeciate that.
I'm having an issue with webview, not sure why. Basically it stops working so if I go to Waze or an email app, it stutters and causes the app to shut. I've tried clearing data of android webview and also flashing magisk openweb instead without any luck. Bromite webview doesn't even get recognize. Also reflashed MindtheGapps, issue persists. Anyone know what the cause could be?
Last edited:
I use Bromite fine including WebView. You could try Chrome or Firefox and set that as the default browser.
If Chromium-based (including Chrome) fails you'll probably need Firefox.
I've just reset the whole phone, I'll flash Lineage again. How do I take a logcat?
UPDATE: The webview issue happened again after a clean install from stock 13. The way it happened was after freezing/disabling Play Store then unfreezing. Apps that rely on webview including browser no longer work properly. Freezing Play Store solved the issue but it's not a long term solution.
Does anyone know how to get WearOS working? (I'm on MindtheGapps).
Last edited:
You could try using Firefox as the default browser, maybe LOS' upstream Chromium code is not 100% working, but using Firefox makes WebView use FF.
How are you resetting SystemUI? I googled it and saw a lot of instructions for Android 5 but not 13.
I am having no problems with SystemUI.
A lot of the reset SystemUI apps are older, so they may not work well with A13.
Guys, I have a problem with stock room pixel 7, my wife could not hear my 3 and 4 year old son voice when they talked to her on my pixel 7. I wonder if the room has that problem too?
I've tried multiple ways. Using termux, using AOSP Mods option, through project themer when you apply transparency settings, applying substratum overlays. These all work fine on stock and other custom roms. Just crashes on lineageOS.
Try installing gcam service provider from f-droid. That helped me on graphine os when g services framework wasn't installed. Cam opened up with no issue
thanks, tried that but still it just crashed upon opening. went back to Corvus for now
Or maybe the GrapheneOS sandboxed google services? Thanks. Rom has been working fine with Google Play disabled.
I'm basically building LOS as-is from Gerrit/GitHub. LOS has said no to official signature spoofing, so this ROM won't have it either.
If you are interested in MicroG support, I'd recommend CalyxOS. CalyxOS is largely based off LineageOS, even shares devs and features, but also has official MicroG/Aurora support.
GrapheneOS sandboxed play services is a harder bet, since I'd have to port over a lot of Graphene code to LOS, namely the sandboxing code. And that would break users who need to pass SafetyNet like me.
Yes, GrapheneOS is super interesting, I've tried it too, but needing GPay for my family's common debit card makes it a no-go since I can't pass SafetyNet with GrapheneOS, unless I were to hack it with porting Displax SafetyNet Fix and maintain a fork I can forget to maintain.
Similar threads
Top Liked Posts
-
2
I'm using microG on the experimental build,
I installed Magisk + LSPosed + Fakegapps (signature spoofing xposed mod) and they works fine!
In the future, I hope that we'll get official builds so we could get microG/signature spoofing builds done by lineageos for microG team.
Anyway, I'm so glad we managed to get a new build, I can finally start to pet my panther. -
5
It might not be a perfect place but anyone want panter lineage December built ?4Sorry for the delay, I was really busy the past three months or so. I plan to release new builds of P7 LOS later today.
EDIT: There are experimental LOS builds here: https://ftp.acc.umu.se/mirror/lineageos/exp/
I'm using those above builds now.4
I see an experimental Lineage build was just uploaded
2
I'm using microG on the experimental build,
I installed Magisk + LSPosed + Fakegapps (signature spoofing xposed mod) and they works fine!
In the future, I hope that we'll get official builds so we could get microG/signature spoofing builds done by lineageos for microG team.
Anyway, I'm so glad we managed to get a new build, I can finally start to pet my panther.1
I think it's better to make different thread otherwise it's possible that it will hijack current thread.. -
32
LineageOS 20.0 for the Pixel 7 Pro (cheetah) and Pixel 7 (panther).
Known issues:
- NOTE: This is an early-stage build, and may not be the most stable. It works fine for me as a daily driver on a Pixel 7 (panther), however.
- The status bar is mis-aligned to the left by a few pixels, but this does not cause any usability issues, fortunately.
- Dual eSIM doesn't work (yet), but stock is probably affected too until the feature drop
- You tell me.
- Be sure you're on the latest stock 13 build and have an unlocked bootloader. You may also be able to flash from GrapheneOS, CalyxOS, or another ROM.
- Go into fastboot mode (turn off phone and then Power + Volume down)
- Make sure you have the adb/fastboot tools
- Run
fastboot flash --slot all boot boot.img - Run
fastboot flash --slot all init_boot init_boot.img - Run
fastboot flash --slot all vendor_boot vendor_boot.img - Run
fastboot flash --slot all vendor_kernel_boot vendor_kernel_boot.img - Boot into recovery
- Press Factory Reset and confirm
- Go to Apply Update -> Apply from ADB
- Run
adb sideload LOS_BUILD(Replace LOS_BUILD with your LOS ZIP file) - To add GApps, go to Advanced -> Reboot to Recovery -> Apply Update -> Apply from ADB
- Run
adb sideload GAPPS_BUILD(Replace GAPPS_BUILD with your GApps ZIP file, repeat this step if you want Magisk) - Press Reboot System Now
Update Instructions:
- Download the latest ZIP
- Reboot to recovery
- Flash the latest ZIP
- Reboot to recovery
- If you previously installed it, flash GApps and Magisk
- Reboot to system
Passing SafetyNet/Play Integrity:
For some reason, this ROM only needs the Displax SafetyNet Fix and Shamiko (or DenyList) on top of Magisk in order to pass SafetyNet/Play Integrity, which is a nice bonus. As of 11/17, I was able to use GPay with this ROM if you use Magisk, Shamiko, and Displax SafetyNet Fix.
Download:
Pixel 7 Pro (cheetah)
Pixel 7 (panther)
Official MindTheGApps
UPDATE: LineageOS has "experimental" builds for Pixel 7 (and 6) here. They aren't technically mine, but I'm also the reason Google Tensor GKI kernels build there
. Fortunately GPay still works with the experimental builds.
Sources:
Kernel
Device Trees
Vendor11
I still maintain this build for the fun of it, and for anyone who wants it. I use it mainly since the Pixel stock ROM is a bit bloated for me.bu.. bu. but the pixel firmware is already perfect
Yes, the Pixel stock ROM is still excellent, even better than many other custom ROMs IMHO, and definitely when compared to something "stock" like OnePlus OxygenOS <=11 (yes, even pre-ColorOS OOS was trash IMHO) or Motorola's stock ROM.
I did run Pixel 3/6/7 with both stock and custom ROMs but only ran OP/Moto devices with custom ROMs.
And even if LOS isn't needed on a Pixel 6/7 now, it will be 3 years down the line when you only get security updates, and especially 5 years post-release when Google stops updating.
I don't need LOS on a Pixel the way I need it on a OnePlus (or a Motorola), but it's still nice to have just in case.5ChangeLog:
2022/11/26:
- Updated build to 2022/11/27 (arrgh, UTC/PST differences)
2022/11/16:
- Initial build for cheetah/panther.
- Is stable (for me at least) on a Pixel 7, your experience may vary however
5
It might not be a perfect place but anyone want panter lineage December built ?4@neelchauhan's 11/27 build won't work on the stock December firmware. If you've already flashed / updated to the stock December update, factory flash the stock November factory image (TD1A.221105.001) before trying the 11/27 build.
