[ROM][UNOFFICIAL][CLOSED] Resurrection Remix for S5 LTE+ (G901F) / LTE-A (G906S/K/L)

[cvxda]

Resurrection Remix for Samsung Galaxy S5 LTE+ / LTE-A

Closed Project

Built from RR github repo plus kccat6/lentislte device trees.

- Your warrenty is now void.
- You [b]WILL[/b] trip KNOX!
- You have been warned.
- Use at your own risk.

Introduction:

This is the thread for the unoffical port of Resurrection Remix to

• Samsung Galaxy S5 LTE+, SM-G901F, codename kccat6, and
• Samsung Galaxy S5 LTE-A, SM-G906S/K/L, codename lentislte.

• This project is based on the port to Lineage OS and the main development for our device will take place in the matching Lineage OS thread.

How to install:

• For kccat6, use bootloader CQJ1 or CQJ2.
• For lentislte use bootloader CPL1.
• install custom recovery, ideally directly from the TWRP project.
  For kccat6: twrp-3.2.3-0-kccat6.img
  For lentislte: twrp-3.2.3-0-lentislte.img
  
  Note: TWRP 3.2.1-0 is required starting with RR 6.0.0 builds!​
• Enter recovery mode
• Factory reset
• Flash below ROM
• Optionally flash Gapps. I suggest OpenGapps
• Reboot

Know bugs:

• For known bugs, see the Lineage OS thread in the first place. Only Resurrection Remix-specific bugs will be handled in this thread.

Download from:

• kccat6: https://cygwin.de/rr/kccat6/
• lentislte: https://cygwin.de/rr/lentislte/

Current version:

• RR-P-v7.0.2-20191209
• Pie 9.0
• Android security level 2019-09-05 (kernel 2019-12-05)

Sources:

• Resurrection Remix on GitHub
• Lineage OS on GitHub

Have fun,
Corinna

XDA:DevDB Information
Resurrection Remix for Samsung Galaxy S5 LTE+ / LTE-A, ROM for the Samsung Galaxy S5

Contributors
cvxda, xamio, sktjdgns1189
Source Code: https://github.com/github-cygwin/

ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: kccat6: CQA2 or later, lentislte: CPL1 or later
Based On: Lineage OS, Resurrection Remix

Version Information
Status: Beta

Created 2017-01-08
Last Updated 2020-02-11

 

[cvxda]

Notes:

Please see the Notes section in the sister thread for LineageOS on G901F

 

[cvxda]

Reserved

--

 

[michaelbelachev]

Current version is Resurrection Remix 5.8.0 20170107, btw.

Corinna

OTA works?

 

[Iron Steel]

Hi @cvxda,

I'm actually on Norma V5 rom with bootloader CPI4 and modem CPE1. Can I install RR rom without install first a stock FW and TWRP and only make a full wipe and install rom and gapps.
my version of TWRP is twrp-3.0.2-1-b4-kccat6.tar.
and what's the good package of gapps (mini, stock, nano, etc) to use with.

thanks for answer.

 

[michaelbelachev]

Hi @cvxda,

I'm actually on Norma V5 rom with bootloader CPI4 and modem CPE1. Can I install RR rom without install first a stock FW and TWRP and only make a full wipe and install rom and gapps.
my version of TWRP is twrp-3.0.2-1-b4-kccat6.tar.
and what's the good package of gapps (mini, stock, nano, etc) to use with.

thanks for answer.

If you want a stable work rom, I recommend you to install the last samsung firmware. For example this

 

[Iron Steel]

ok thanks michaelbelachev,

for Nordic Countries, the last one is this, can I use it?

 

[cvxda]

New Resurrection Remix build 20170107

Hi,

I just uploaded RR-N-v5.8.0-20170109-kccat6xx.zip to my kccat6 download site. This release fixes CVE-2016-2504, see this posting for details.


Corinna

 

[cvxda]

OTA works?

Yes. But note that RR OTA is a poor man's OTA.

Corinna

 

[cvxda]

Hi @cvxda,

I'm actually on Norma V5 rom with bootloader CPI4 and modem CPE1. Can I install RR rom without install first a stock FW and TWRP and only make a full wipe and install rom and gapps.
my version of TWRP is twrp-3.0.2-1-b4-kccat6.tar.

Should work, I'm on CPJ4/CPE1 myself.

and what's the good package of gapps (mini, stock, nano, etc) to use with.

Any opengapps package should work, there's enough room left on the system partition. Personally I'm using pico only because I don't need any of the stuff packed with the bigger packages.

Corinna

 

[michaelbelachev]

ok thanks michaelbelachev,

for Nordic Countries, the last one is this, can I use it?

Yes)

 

[HAJT669]

This works on a KLTE G900F!?

 

[cvxda]

This works on a KLTE G900F!?

https://forum.xda-developers.com/showpost.php?p=70468186&postcount=29

 

[hanhtinhxanh134]

Does this rom work for g906?

 

[mindblower01]

Everything working fine, except volume bar, it don't dissappearing when regulate volume. After transmitting something over Bluetooth,when clicking on directly in notification panel cause crash. Antutu score is 74500. You're doing great job

Wysłane z mojego SM-G901F przy użyciu Tapatalka

 

[cvxda]

Does this rom work for g906?

Not officially, no.

However, from all I could find about G906S, the only differences compared to G901F should be

• supported mobile bands
• RAM/sdcard sizes
• display resolution

No guarantees, you may brick your phone, do this at your own risk:
If you're the daring type, you could make a Nandroid backup of your current system, try to flash this ROM and tell us what happens. If it doesn't work at all, go back into TWRP and restore your backup.

Corinna

 

[cvxda]

Everything working fine, except volume bar, it don't dissappearing when regulate volume.

I just tried it myself and it works fine for me. After changing the volume with the volume keys, the bar disappears after about 2 secs.

After transmitting something over Bluetooth,when clicking on directly in notification panel cause crash.

Hmm, is the crash really related to bluetooth? I'm just hacking this reply using a BT keyboard and it works as expected, no crashes at all. I only have this single BT device for testing, though.

Antutu score is 74500. You're doing great job

Thanks,
Corinna

 

[mindblower01]

I just tried it myself and it works fine for me. After changing the volume with the volume keys, the bar disappears after about 2 secs.



Hmm, is the crash really related to bluetooth? I'm just hacking this reply using a BT keyboard and it works as expected, no crashes at all. I only have this single BT device for testing, though.



Thanks,
Corinna

A tried the Bluetooth one more time and it's working About volume bar, maybe it's fault dirty install from previous version of rr. When you upload a new vsn I just do clean install, it will help. Thx & have nice day

 

[Farmboy0]

Building ROM

I tried to build this ROM myself.
But lunch doesn't list the device.
Are there build instructions anywhere to be found?

 

[Painkiller-axel]

Best RR Rom for g901f
Beutyfull Personal Settings
Super,super thanks