• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

[ROM][UNOFFICIAL][FINAL] CyanogenMod 10.2 for L7 II

Status
Not open for further replies.

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest
CyanogenMod 10.2 is a free, community built, aftermarket firmware distribution of Android 4.3.1 (JellyBean), which is designed to increase performance and reliability over stock Android for your device.

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Code:
#include 
[SIZE="3"]/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
 */[/SIZE]
Notes :
DUAL SIM IS NOT SUPPORTED (not even 1 SIM) because CM10.2 doesn't have 2 SIM framework.
I am not supporting any other kernels than the one provided.
Do not be rude and behave well with all members. Do not thanks post. Please. We are just spamming this thread like that. If you want to show your appreciation please hit the Thanks button.
BUG REPORTS WITHOUT LOGCAT/DMESG OR WITHOUT CLEAN FLASH OR WITHOUT KERNEL PROVIDED WILL BE IGNORED.
DO NOT HOLD FLASHLIGHT FOR MORE THAN 10 MINUTES AND AFTER THAT LEAVE IT COOL DOWN UNTIL YOU POWER IT AGAIN. YOU HAVE BEEN WARNED!


Instructions for flashing:

VERY IMPORTANT!!! After the first boot is completed, reboot the device once and go to Settings->More and disable NFC or you will have battery drain!
On Setup Wizard, "Bluetooth Share" will crash. Just press OK and ignore that. All is OK.


If you upgrade to another CM version or you are coming from another ROM:

- Make sure you run CWM or TWRP recovery (latest versions). Follow instructions in the specific threads on XDA
- Make a full wipe (/system, /data, /cache, /dalvik-cache, internal storage) -> VERY IMPORTANT
- Download the zip you want to flash
- Download Gapps (if you want)
- Install the zip from recovery
- Install gapps (if you want)
- If you have NONFC variant or you don't want nfc flash the NFC Disable zip
- WIPE DATA/FACTORY RESET
- Reboot
- Enjoy

Downloads:
PLEASE DO NOT MIRROR THIS OR UPLOAD IT TO ANY OTHER SITES. IF YOU WANT TO POST THIS ANYWHERE ELSE, PLEASE RESPECT MY WORK AND LINK HERE (THIS DOES NOT MEAN YOU CAN MIRROR THIS LINK). NO OTHER DOWNLOAD PLACES. IF I WILL FIND OTHER LINKS ABOUT CM10.2 NOT LEADING TO THIS (LIKE I FOUND IN OTHER CASES) I WILL STOP THE DEVELOPMENT. SORRY. OPEN SOURCE DOESN'T MEAN LACK OF RESPECT.

cm-10.2-20150527-NEUTRONDEV-p710-NFINAL.zip
Mirror: cm-10.2-20150527-NEUTRONDEV-p710-NFINAL.zip

Gapps (use this, not others; you want to use others your problem): Gapps Mini Cm10.2
Mirror: Gapps Mini Cm10.2
Nfc Disable (Flash this after google apps if you have NONFC version or you want to disable it forever): NFC Disable => always redownload it has been changed
Mirror: NFC Disable

Old downloads:


Source code:
All the available source codes are here:
https://github.com/neutrondev03

XDA:DevDB Information
NeutronCM10.2, ROM for the LG Optimus L7 II

Contributors
christi9503
ROM OS Version: 4.3.1 Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 10.2

Version Information
Status: Final (Development is stopped)
 
Last edited:

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest
What is working:
Radio (Call + Data) -> Single Sim
All lights (Flash, Led, Button light)
Storages (Internal+External)
All sensors (Proximity, Compass, Acceleration, Orientation)
Bluetooth
Wi-fi
GPS
All Tetherings (Wi-fi, Bluetooth, Usb)
Root
Camera
Audio
Offline Charging
NFC

Known Issues:
Fm radio (this will not get fixed, don't ask about it, sorry)
On video recording if you are taking video begging with a frame that is not still you might get stuck. Better start still and with manual focus. If video gets stuck reboot device.
Sometimes when you turn GPS off it will GPSLocationService will keep device wakelocked (this is not a bug from our device but AOSP). If this happens and you lose battery. Reboot device.
Keyboard does not vibrate (CM source bug). Search another keyboard if you are bothered.
Mic gain will be weird because Lg used custom audio routing so the top one will have more gain so that means a little lower main mic sound

Changelog:



Code:
NFinal (27-05-2015)

[changed] enabled LockClock again
[changed] now the flashlight will use maximum brightness
[fixed] Wi-fi tether
Code:
Final (20-05-2015)

[NEW] Loading WI-Fi just like LG does
[removed] Overclock + Underclock (our best lowest Freq is the one already used and CPU OC is just for numbers)  
[removed] All useless stuff
[fixed] BATTERY DRAIN
[fixed] sensor problems
[removed] SoundRecorder + Voice Dialer + all stuff that is not needed from CM
[changed] lowered performance by a little to get huge battery -> Stay on the default governor: OnDemand
[changed] Removed SmartassV2 + default OnDemand
[changed] Qmemo button is now used to Open Camera app
[changed] final optimziations
[changed] most profound deep-sleep ever
[changed] all Kitkat Blobs
Code:
RC1 (11-05-2015)

[added] Overclock to 1046 
[fixed] Crash on Gapps Setup Wizard
[fixed] Sound recorder program
[fixed] Internet Hotspot
Code:
RC1 (06-05-2015)

[changed] Now running custom version of Skernel thanks to @skyinfo
[changed] a lot of stuff in kernel
[changed] kernel now compiled with linaro 4.6.4
[changed] kernel super stable and fast
[added] initial support for dual-sim version
[reenabled] NFC
[improved] general response
[fixed] Camera (all 3 mods) + Do not pause and resume or camera will crash
[fixed] 3 pin headset (no mic)
[improved] ramdisk
[improved] uevents
[improved] bluetooth socket connection
[improved] kicked out useless binaries
[fixed] terminal emulator
[removed] useless CM stuff
[added] intensity selection under Settings->More
Code:
Beta10.2_2 (21-04-2015)

[disabled] NFC
[added] option to use home button to wake screen
[added] Torch to toggles 
[optimization] cortex a9 + fpu for our device
[fixed] bluetooth
[fixed] offline charger (to charge without going in CM)
[fixed] sensors freaking out
[fixed] kernel panic on reading sensors
[changed] updated OMX to kitkat
[changed] default governor is Intelliactive (better than H3)
Code:
Beta10.2_1 (18-04-2015)

[BIG CHANGE] CHANGED TO CM10.2
[fixed] all audio but headset
[fixed] NFC
[change] using my own kernel
[improvement] much more optimized
[fixed] Data working
[fixed] Led fully working
[change] vee7 + p710 -> Nvee7
[improvement] futher optimization of kernel and ramdisk + GCC 4.7 + adding i/o + governors
[improvement] now all is built with brunch
[broken] Camera
[broken] Bluetooth
[not working] Offline charger
[bug] HUGE BATTERY DRAIN
Code:
Beta N1 (27-03-2015)

[fixed] RIL -> still Data not working -> Calls + SMS working
[fixed] Microphone now activates
[still broken] Sound routing
[changing] Airidosas252 kernel
[changing] Leds to work
[changing] Making NFC work
Code:
Beta 2 (25-03-2015)

[fixed] camera because of the kernel
[improvement] changed kernel to kitkat
[improvement] performance tweaks and some patches 
[improvement] ramdisk is very clean
[removed] rild so device won't get hot and no lag until RIL fix + if you want battery airplane mode on
Code:
Beta 1 (24-03-2015)

[fixed] WiFi
[broken] wifi tether
[broken] camera
[improvement] egl surface texture 
[improvement] performance and dalvik improvement
Code:
Alpha 2 (11-03-2015)

[fixed] Bluetooth
[fixed] Camera
[fixed] Buttons
[fixed] Storages
Code:
Alpha 1 (07-03-2015) not public due to too many bugs
 
Last edited:

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest
Credits and thanks:
@Dazzozo -> Thank you for your work and u8833 work
@Kra1o5 -> Thank you for your u8833 work
@luca020400 -> Thank you for being super helpful and super nice
@fonz93 -> Thank you for all your work
@skyinfo -> Thank you for the in-built kernel (SKernel-Nedition)
@Caio99BR -> Thank you
@airidosas252 -> Thank you
@dhacker29 -> Thank you
@freeusername -> Thank you
@maxx_hr -> Thank you for this slim Gapps (also, thanks to the original maker)
TeamHackLg -> Thank you
CyanogenMod -> Thank you
Xda for this nice home

Huge thanks to my donors:
@vlmaxx -> Thank you!!! You are the man!!!
@shiftyHungary -> Thank you

If you think I have left you out pm me. We solve this ^.^.
 
Last edited:

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest

Screenshots:
Screenshot_2015-05-03-16-52-02.jpgScreenshot_2015-05-03-16-52-11.jpgScreenshot_2015-05-03-16-52-33.pngScreenshot_2015-05-03-16-52-44.pngScreenshot_2015-05-03-16-53-07.pngScreenshot_2015-05-03-16-53-14.pngScreenshot_2015-05-03-16-53-18.pngScreenshot_2015-05-03-16-53-24.pngScreenshot_2015-05-03-16-53-36.png

FAQ (Read before posting !!!):
The questions that are here won't be answered in the post!!!

1. How to enable Developer Option?
Go to Settings->About phone->Build number->Tap on it 7 times.

2. How to enable USB Debugging?
After you enable Developer Option go to Settings->Developer options->Check USB debugging.

3. How to enable Reboot recovery from the reboot menu?
Go to Settings->Developer options->Check Advanced reboot.

4. How to disable Home key unlock (it is enabled by default)?
Go to Settings->Buttons->Uncheck Home button wake.

5. Do you want faster UI?
Go to Settings->Developer options->Scroll down to DRAWING->Set Transition animation scale and Animation duration scale and (Optional: Windows animation scale) to Animation scale .5x


 
Last edited:

Jorge R

Senior Member
Dec 3, 2012
168
22
0
Until now , apart from the already mentioned errors in the thread , no. Although I think few bugs having your rom cm

Even so congratulations for your work, you should make it known more for people who have this smart phone by post to other pages . In Latin America or Europe have HTCMania and taringa , you could get an account on these pages and present your work . :)
 

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest
Until now , apart from the already mentioned errors in the thread , no. Although I think few bugs having your rom cm

Even so congratulations for your work, you should make it known more for people who have this smart phone by post to other pages . In Latin America or Europe have HTCMania and taringa , you could get an account on these pages and present your work . :)
I will do that when it is bug free ^.^. Need to fix RIL wi-fi and sound for this to be a daily driver. ^.^
 
  • Like
Reactions: tomcis147

DS_katauri

Senior Member
Dec 22, 2014
175
28
0
Kyiv
Hello. Could You please explain me where Camera app is located? Can't find it in system/app(neither in zip or in installed ROM) . And also i've used few apk's from this ROM to my P713 v 10j (Trebuchet,Apollo,Calculator,Gallery) - and now suddenly I've got 2 camera apps. One from stock LG and other is hidden CM camera,working without any apk and any signs even in application manager.
 

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest
Hello. Could You please explain me where Camera app is located? Can't find it in system/app(neither in zip or in installed ROM) . And also i've used few apk's from this ROM to my P713 v 10j (Trebuchet,Apollo,Calculator,Gallery) - and now suddenly I've got 2 camera apps. One from stock LG and other is hidden CM camera,working without any apk and any signs even in application manager.
I don't know, sorry and this is CM10 only reserved thread. I am not gonna debug anything but this firmware as it is provided (without mods, xposed, other kernels etc.). Have a great day!
 

DS_katauri

Senior Member
Dec 22, 2014
175
28
0
Kyiv
I don't know, sorry and this is CM10 only reserved thread. I am not gonna debug anything but this firmware as it is provided (without mods, xposed, other kernels etc.). Have a great day!
Sorry,i wrote something wrong)) But about this CM10 build,there must be a camera app somewhere in system(system/app or system/priv app or smth like this) - but i can't find where is it,maybe built-in in CM gallery or in trebuchet launcher.
 

manosper

Senior Member
Mar 27, 2015
55
7
0
Rethymno
thanks for this nice rom.I tested it, its fast but i cannot figure how to stop led blinking(i cannot disable it) and when you try to make o phonecall the microphone is not working only the loudspeaker..and i think that its overheating.and the data as you already wrote is not working.all the rest works perfect and made around 9900 benchmark antutu....if you fix these details it wil be the best rom for p710....
 

neutrondev

Elite Member
Aug 20, 2013
1,169
2,037
0
Bucharest
thanks for this nice rom.I tested it, its fast but i cannot figure how to stop led blinking(i cannot disable it) and when you try to make o phonecall the microphone is not working only the loudspeaker..and i think that its overheating.and the data as you already wrote is not working.all the rest works perfect and made around 9900 benchmark antutu....if you fix these details it wil be the best rom for p710....
It is known issues. Mic sometimes activates sometimes not. Routing in audio is know. Overheating is due to cpu staying at max freq (I will fix that need to write in init.rc) and data not working (disable mobile data). It will get fixed. You can't stop led. It is known. I am just writing some lines to fix led atm and I am looking into audio. I thank you also for testing and for feedback. If you have any questions I am always here. All the best.
 
Status
Not open for further replies.