[ROM] [UNOFFICIAL] [herolte] LineageOS 15.1 for microG

[Critique]

I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. 
A lot.

decided to start posting my own builds of lineageos 15.1 for microg.

Working Features:
Camera
Camcorder
WiFi
Sound
Mali Drivers
USB Tethering
Video Playback
Fingerprint Sensor
RIL (SMS, Calls, Mobile Data)
Sensors
Buttons and their Backlight
Bluetooth
Wifi Hotspot
MTP
2D and 3D GPU Acceleration
HW Encoding
HW Decoding
Offline Charging (Charging while device is powered off)
HWComposer (HWC)
GPS
Wireless Display
Wi-Fi Direct
Possibly other things not listed.

Non-working/partially working features:
VoLTE and VoWIFI
Possibly things not listed.

Creates a full backup of the System.

Installation Instruction
Complete deletion (System, Data, Cache, Dalvik)
Install the build +(addonsu-15.1-arm64-signed.zip or Magisk)
restart
(if you use magisk you have to install manger later MagiskManager

OTA is set up,
In the future, updates can be downloaded to your mobile phone via lineageos_updates, and
will be installed automatically. if it is not possible to install the update automatically or you want to install it manually, proceed as follows,
(Selects in twrp) install/selects memory/internal memory/parent folder/data/lineageos_updates.
chooses the build and installs it and everything else you want to install and restarts after that.

to activate root
navigate to Settings / Scroll down over phone tap build number 7 times,
goes back to screaming back then on developer opions and scrolls to root access and activates it.
to be able to boot from the power key to recovery on long press, just activate it in the developer options under Extended Restart.

Download addonsu: +(addonsu-15.1-arm64-signed.zip
Download Magisk: official-magisk-v7-universal

The builds are created by Exodusnick

Download Rom: https://www.los-legacy.de/15.1/herolte

Support for german users
https://android-freaks.de/forum/thread/4-rom-unofficial-herolte-hero2lte-lineageos-15-1-for-microg/

Telegram Info
https://t.me/lineageOS_Unofficial_herolte

great thanks for the help goes to :
turbolukex5
john-soda

Find more about LineageOS for microG here: https://lineage.microg.org/

XDA:DevDB Information
LineageOS 15.1 for microG, ROM for the Samsung Galaxy S7

Contributors
Critique, Exodusnick, john-soda
Source Code: https://github.com/ivanmeler/android_kernel_samsung_herolte/tree/lineage-15.1

ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: LineageOS

Version Information
Status: Stable
Current Stable Version: 18.03.2019

Created 2018-12-10
Last Updated 2020-03-15

 

[Critique]

Reserved

 

[yakaaithiri]

Does this have support for VoLTE ?

 

[Critique]

latest build:
08/12/2018 - https://mega.nz/#!WO4ABABS!GXnN5jU03mWPuc-NdsEzAmyoWda7gMRD6uX2nff1_DE

Does this have support for VoLTE ?

no. i don't think lineageos will ever support volte on herolte.

 

[john-soda]

Thanks for sharing your builds!

 

[Critique]

latest build - 14/12/2018
https://mega.nz/#!t9ljVKqL!QygHkOvv9j37Nqn1rZiaYkiqqBRlmyhEMFuQz_85-fo

sha256sum: 3cc97ccacf7415cdb94bf4227ba3f10adc30f1422072a22702f3a5f2200c988e

 

[TheBiggestJim]

Thanks for the ROM, it's awesome that someone is compiling this!

Would you be able to reupload the previous release? The current Mega link is corrupt (file is about 100MB too small) and I'm experiencing the same wifi issue that's being reported in the mainline herolte 15.1 thread.

 

[john-soda]

@Critique I had no time to test your last two builds (X-mas stress), but I already downloaded them and I can confirm that the 20181208 build is approx.. 100 MB too small.

 

[Critique]

Thanks for the ROM, it's awesome that someone is compiling this!

Would you be able to reupload the previous release? The current Mega link is corrupt (file is about 100MB too small) and I'm experiencing the same wifi issue that's being reported in the mainline herolte 15.1 thread.

@Critique I had no time to test your last two builds (X-mas stress), but I already downloaded them and I can confirm that the 20181208 build is approx.. 100 MB too small.

weird, my bad.
new link for 08/12/2018 - https://mega.nz/#!wwd1yIzD!RtCcakyCT_Pmim15IFFT2mzD9j0Z-KN8ZalD7sGxQ9c

let me know if it works

 

[TheBiggestJim]

weird, my bad.
new link for 08/12/2018

let me know if it works

It works great, including wifi!

Thanks for the reup and for the builds!

 

[john-soda]

Update would be great!

 

[Critique]

build 04/01/2019 - https://mega.nz/#!Ax8DgYJZ!rH8TyyN7-ZbboeovE6zzybmcE8xUfVp4IQ93KfaqbnM

 

[john-soda]

build 04/01/2019 - https://mega.nz/#!Ax8DgYJZ!rH8TyyN7-ZbboeovE6zzybmcE8xUfVp4IQ93KfaqbnM

Could you post the Checksum? Thanks!

 

[Critique]

Could you post the Checksum? Thanks!

sha256sum: 6af88979cb45fb85a36ab5b9341d60d5b654aa22faf3e5978ee7bd326f20c0b3

 

[Bertrand*]

hello,

First of all I want to say thank you because I am trying to ungooglize me and it is not so easy.
I am really surprised thant in xda there are so few people in that idea.
So thank you to critique to deliver us a rom "all in one and ready to use" without the beast.

Last night I tried to dirty flash the new release (build 04/01/2019) and it bloqued the phone on the screen "Samsung".
Hopefully I managed to come back to the TWRP and to flash the old release (Built 14/12/2018) (without the wifi?)
My question is: Did somebody manage to install the new release ? and
- If yes does he knows why I did not manage to...?
- If no,
What is the last build working fine (and with wifi)?
Critique could you rebuild your new release please?

Thanks, B.

 

[Critique]

hello,

First of all I want to say thank you because I am trying to ungooglize me and it is not so easy.
I am really surprised thant in xda there are so few people in that idea.
So thank you to critique to deliver us a rom "all in one and ready to use" without the beast.

Last night I tried to dirty flash the new release (build 04/01/2019) and it bloqued the phone on the screen "Samsung".
Hopefully I managed to come back to the TWRP and to flash the old release (Built 14/12/2018) (without the wifi?)
My question is: Did somebody manage to install the new release ? and
- If yes does he knows why I did not manage to...?
- If no,
What is the last build working fine (and with wifi)?
Critique could you rebuild your new release please?

Thanks, B.

no problem; glad i could be of help! :good:

have you tried clean installing the newest build?

 

[Bertrand*]

no problem; glad i could be of help! :good:

have you tried clean installing the newest build?

Yes, I tried, for same result...
I have verified the checksum too.

 

[john-soda]

Last night I tried to dirty flash the new release (build 04/01/2019) and it bloqued the phone on the screen "Samsung".

Installed the new build today. Same behavior for me. Phone doesn't boot anymore and stuck on Samsung Galaxy S7 Bootscreen.

---------- Post added at 08:48 PM ---------- Previous post was at 08:18 PM ----------

For people who don't know.
When S7 gets stuck in bootscreen, press for approx. 10 sec Volume down + the power button until the screen gets black. Then Change immediately to volume up + power button + home to get in Recovery.

 

[Critique]

Installed the new build today. Same behavior for me. Phone doesn't boot anymore and stuck on Samsung Galaxy S7 Bootscreen.

---------- Post added at 08:48 PM ---------- Previous post was at 08:18 PM ----------

For people who don't know.
When S7 gets stuck in bootscreen, press for approx. 10 sec Volume down + the power button until the screen gets black. Then Change immediately to volume up + power button + home to get in Recovery.

weird.
i don't have my s7 at the moment to test it myself, so hopefully i can figure out the problem another way and, fingers crossed, the next build works fine.

 

[Critique]

..