[ROM][OFFICIAL][kebab][11] LineageOS 18.1
- Thread starter LuK1337
- Start date
xstefen
Senior Member
- Feb 14, 2013
- 389
- 341
is it really sooo simple ?
I tried it according to this method :
But with fastboot flash system I got an error: -> Not enough space to resize partition"
Tried again according to these instructions: https://www.naldotech.com/lineageos-18-for-oneplus-8t-download-install/ but same problem.
Then I did some stupid actions and the T8 was brickt. :-(
Fortunately I was able to restore it to the original state:
xdaforums.com
hmm... I still want to have all the Bloadware away from the T8
Have that also used with my MIX 2S nice to run, even if that is already 2 years ago.
well... I'll try again in the next few days.If someone still has a tip because of the errors above - thanks in advance
KB2003 EU Model... updated to 11.0.7.10. - unbrick to OOS 11.0.5.6
I tried it according to this method :
But with fastboot flash system I got an error: -> Not enough space to resize partition"
Tried again according to these instructions: https://www.naldotech.com/lineageos-18-for-oneplus-8t-download-install/ but same problem.
Then I did some stupid actions and the T8 was brickt. :-(
Fortunately I was able to restore it to the original state:
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
xdaforums.com
hmm... I still want to have all the Bloadware away from the T8
Have that also used with my MIX 2S nice to run, even if that is already 2 years ago.
well... I'll try again in the next few days.If someone still has a tip because of the errors above - thanks in advance
KB2003 EU Model... updated to 11.0.7.10. - unbrick to OOS 11.0.5.6
Consider not following some random videos.is it really sooo simple ?
I tried it according to this method :
But with fastboot flash system I got an error: -> Not enough space to resize partition"
Tried again according to these instructions: https://www.naldotech.com/lineageos-18-for-oneplus-8t-download-install/ but same problem.
Then I did some stupid actions and the T8 was brickt. :-(
Fortunately I was able to restore it to the original state:
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
hmm... I still want to have all the Bloadware away from the T8
Have that also used with my MIX 2S nice to run, even if that is already 2 years ago.
well... I'll try again in the next few days.If someone still has a tip because of the errors above - thanks in advance
KB2003 EU Model... updated to 11.0.7.10. - unbrick to OOS 11.0.5.6
is it really sooo simple ?
I tried it according to this method :
But with fastboot flash system I got an error: -> Not enough space to resize partition"
Tried again according to these instructions: https://www.naldotech.com/lineageos-18-for-oneplus-8t-download-install/ but same problem.
Then I did some stupid actions and the T8 was brickt. :-(
Fortunately I was able to restore it to the original state:
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
hmm... I still want to have all the Bloadware away from the T8
Have that also used with my MIX 2S nice to run, even if that is already 2 years ago.
well... I'll try again in the next few days.If someone still has a tip because of the errors above - thanks in advance
KB2003 EU Model... updated to 11.0.7.10. - unbrick to OOS 11.0.5.6
[/Q
Flash the ROM according to the instructions you can find in the original post!
I have updated to lineage-18.1-20210217_093726-UNOFFICIAL-kebabHuh! Fingerprint now decided to work spontaneously!
and I have the same issue trying to get the fingerprint to work again. This time the fingerprint image will not disappear (it overlays all screens) unless I reboot or log out and back in.
Hopefully it spontaneously works again. Anyone have any suggestions?
Thanks.
Last edited:
you are right... but as a non-native english speaker, it's easy to overlook and overread things, so it's easier to follow the (step by step) youtube videos.
will try it again (with op) these days and report back
(for now I'm glad that I could restore the original state) ;-)
will try it again (with op) these days and report back
(for now I'm glad that I could restore the original state) ;-)
hmm?
Code:
Archive: lineage-18.1-20210217_093726-UNOFFICIAL-kebab.zip
Length Date Time Name
--------- ---------- ----- ----
0 02-17-2021 10:37 android-info.txt
54059008 02-17-2021 10:36 boot-debug.img
100663296 02-17-2021 10:36 boot.img
1894960 02-17-2021 10:24 dtb.img
25165824 02-17-2021 10:24 dtbo.img
1224816 02-17-2021 10:33 odm.img
342700360 02-17-2021 10:36 product.img
1406865 02-17-2021 10:23 ramdisk-debug.img
1261214 02-17-2021 10:23 ramdisk.img
9752542 02-17-2021 10:26 ramdisk-recovery.img
100663296 02-17-2021 10:36 recovery.img
5080 02-17-2021 10:23 super_empty.img
207687924 02-17-2021 10:36 system_ext.img
1011249588 02-17-2021 10:37 system.img
1004220 02-17-2021 10:33 userdata.img
8192 02-17-2021 10:37 vbmeta.img
4096 02-17-2021 10:37 vbmeta_system.img
1016668464 02-17-2021 10:37 vendor.img
--------- -------
2875419745 18 filesAfter unbricking with MSM Download Tool & full restore couple times....
Went through OP steps exactly with latest Platform-tools as ROOT (Linux), and every time I get fastboot loop. Also, could not run $ fastboot boot recovery.img without first unlocking bootloader.
Any ideas? Thanks
Went through OP steps exactly with latest Platform-tools as ROOT (Linux), and every time I get fastboot loop. Also, could not run $ fastboot boot recovery.img without first unlocking bootloader.
Any ideas? Thanks
could not wait
and tried it again yesterday ;-)
worked wonderfully. looks first time pretty boring, but will be fine.
thanks for all your work, Luk1337
You definitely need an unlocked bootloader for any of this. I started a a guide in the guides section, maybe give it a look since you are still having issues. It also uses Linux. (Works for Windows users though too)
Last edited:
LOS Installed, still does fastboot loop..tried sideloading latest Magisk, still no luck...blah
Fyi. This was a factory sealed new KB2005, & I used the proper MSM Tool to unbrick, 4 times already!
Yes I'm using the latest Fastboot & ROOT when flashing. Out of the box, OOS took all updates prior to flash, unlocked bootloader, installed LOS. Never got past Fastboot even once. Cannot boot to LOS. Period.
Fyi. This was a factory sealed new KB2005, & I used the proper MSM Tool to unbrick, 4 times already!
Yes I'm using the latest Fastboot & ROOT when flashing. Out of the box, OOS took all updates prior to flash, unlocked bootloader, installed LOS. Never got past Fastboot even once. Cannot boot to LOS. Period.
Last edited:
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
46
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Downloads :
Reporting Bugs
- DO NOT Report bugs if you're running a custom kernel or you installed Xposed
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
- If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
- If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Code:What is your-- LineageOS version: LineageOS Download url: Gapps version: Did you-- wipe: restore with titanium backup: reboot after having the issue: Are you using-- a task killer: a non-stock kernel: other modifications: Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:11
More like few weeks after OOS12 kernel source is out.tomorrow afternoon 3 p.m
109
Yep, everyone already has it except you. We were about to call you, but you ruined it by asking.8
It appears OnePlus still has not released OOS 12 Kernel source. (<-- Github link)
See these issue links in particular:
Where are the DTS in the OOS12 kernel source?
GPL Violation: OOS12 kernel_oneplus_sm8250 sources have not been released
I linked to two of these issues, there are a ton of them actually, they are scattered across Github, across many devices. Then again across many Reddit threads. OnePlus apprently doesn't care about GPL and doesn't care about releasing the code as they are supposed to.
