[ROM] [UNOFFICIAL] LineageOS 11.0 - edison

Vote if you see this poll!

  • Idk, just passing-by...

    Votes: 0 0.0%

  • Total voters
    3
Search This thread

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang



logo-teal.png



LineageOS 11.0 (Based on KitKat 4.4.4) for Motorola Atrix 2 (edison)


DISCLAIMER
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
*/
* you point the finger at me for messing up your device, I will laugh at you.

ROM INFO
This is unofficial source-built LineageOS 11 aka CM11 for Motorola Atrix 2 (edison). Build is identical to CM11 builds by @alteredlikeness , in fact this build is built using his manifests. Huge thanks to him.
I literally did nothing to get this build works - everything works flawlessly out of the box.
Builds won't be updated unless I found problems that I could fix it myself, or I felt that there's nice features that I could cherry-pick to this build. Since Android 4.4.4 no longer receive updates, thus I don't see there's a necessity to have regular builds - means no updates or ETAs. Every build is considered a Final release.
This build is here to give our beloved Atrix 2 a beautiful ending. :) At least, she gets to taste LineageOS now :good:

ROM FEATURES
It is just like previous CM11 builds, highly identical. Nothing special. No magic sauce. :D
That's not true anyway, I can't resist from adding features that I love to have it on my phone :D Check changelogs or build highlights for added features ;)

ROM BUGS
Code:
 - WiFi : 5GHz not working, disabled in build
 - Display : Casting is not working (codec-related problem)
Every release is personally tested on my Atrix 2 in System 2/3. Sometimes I'm steam enough to install on System 1 (this is not good, I lost my WhatsApp chats :p).
Thus, this build is confirmed safe to install on both System 1, System 2 and System 3. Please perform clean flash if possible.

ROM INSTALLATION
*NEW USERS: Backup your CID from BMM Recovery is you haven't done so! (under Firmware Flashing section)
1. Prepare SD Card, root access (ICS root or KingRoot) and Install BMM (available from my Google Drive)
2. Proceed booting into BMM.
3. Configure system as per your needs. For Boot Options, enable all except Insecure ADB (recommended)
4. Enter BMM recovery. Format /system, /data and /cache.
5. Proceed to flash ROM and other ZIPs.
6. Reboot system. First boot won't take too long, you are good to go then!


SIDE NOTES
- ART works very well. :laugh: but latest 4.4 GAPPS won't work well with ART on 4.4 (Play Store will FC)
- No more arm libs error for some modern apps (such as Flutter based apps), which exists in previous CM builds.
- Xposed is working on this ROM. Use the official Xposed only, do not use SolarWarez's
- This build works pretty fluid with GAPPS installed. However if you need maximum performance, you may use MicroG instead.
- Signature spoofing is available out of the box, useful for MicroG users. Enable it in development settings.

SOURCES


XDA:DevDB Information
[ROM] [UNOFFICIAL] LineageOS 11.0 - edison, ROM for the Motorola Atrix 2

Contributors
lee.wp14, alteredlikeness
Source Code: https://github.com/leewp14

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: LineageOS

Version Information
Status: Stable
Stable Release Date: 2018-12-26

Created 2018-12-28
Last Updated 2018-12-28
 
Last edited:

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
DOWNLOADS
Builds are uploaded to my Google Drive. Click here to access.
Look under directory : edison > lineage
Compatible GAPPS, MicroG and other installers can also be found in directory : edison > misc

*DO NOT MIRROR WITHOUT MY PERMISSION. Thank you.

CHANGELOG
Code:
[U][B]20181226 [FINAL][/B][/U]
 - edison : Use back uevent for audio jack handling

[U][B]20181221[/B][/U]
 - omap4-common : Generate bootanimation according to edison's actual display resolution
 - edison : Configure wifi refresh rate to every 150secs
 - edison : Disabled hardware acceleration
 - edison : Tweaked display auto-brightness value
 - edison : Configure zram according to Intel's paper
 - edison : Enabled battery status LED notification
 - frameworks/apps-settings : Added signature spoofing support with switch in Developer Options
 - frameworks : Bring back vm methods required by Xposed
 - dalvik : Do required whitelisting when Xposed is detected

[U][B]20181209[/B][/U]
 - edison : ZRAM Enabled. disksize 400MB, swappiness 90
 - edison : vm and misc prop configs
 - edison : remove wifi dual band option
 - edison : minimum brightness is now 1 instead of 10 (more dim)
 - frameworks : merged Sony Kitkat firmware's system animations

[U][B]20181208[/B][/U]
 - edison : Disable entropy
 - edison : Reduce VM page cluster to single only
 - omap4-common : (attempt) fix instagram video upload issue
 - kernel : optimize kernel clock tick
 - kernel : disable cpu governor hotplug

[U][B]20181206[/B][/U]
- Added CPU governor : Lionheart, Hotplug

[U][B]20181205[/B][/U]
- Initial build

I will only write changelog for tested working builds :good: try at your own risk if you want to test it before me :3
Those inside .trash folder are my test builds. Please, avoid this folder and other no changelog written build if you want to play safe. Thanks :p
 
Last edited:
  • Like
Reactions: mithun23

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
Miscellaneous

Screenshot
Attached to this post

Tweaks
Coming Soon...
 

Attachments

  • Screenshot_2018-12-06-18-53-24.jpg
    Screenshot_2018-12-06-18-53-24.jpg
    33.7 KB · Views: 187
  • Screenshot_2018-12-06-18-53-35.png
    Screenshot_2018-12-06-18-53-35.png
    211.6 KB · Views: 189
  • Screenshot_2018-12-06-18-53-50.png
    Screenshot_2018-12-06-18-53-50.png
    80.7 KB · Views: 185
  • Screenshot_2018-12-06-18-54-33.jpg
    Screenshot_2018-12-06-18-54-33.jpg
    64.4 KB · Views: 185
  • Screenshot_2018-12-06-18-54-58.png
    Screenshot_2018-12-06-18-54-58.png
    128.8 KB · Views: 177
  • Screenshot_2018-12-06-18-56-58.png
    Screenshot_2018-12-06-18-56-58.png
    75.9 KB · Views: 175
Last edited:
  • Like
Reactions: mithun23

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
Wow! Sweet! And nice job!:good:
I was very surprised to receive a mention notification today. Glad my long-forgotten past work could be of assistance in building this.

Long live Edison!

Thanks for dropping by!
Without devs like you and other Atrix 2/OMAP4 developers, this won't be possible :D Would like to thank you all for the hard works :good:
Recently I bricked my Samsung S Advance, so I get back to use Atrix 2 as my daily driver. Available ROMs for Atrix 2 are quite outdated, thus I decided to give LineageOS 11 a shot.
Anyway, may I have your advice on this device's file system? Is it that we must stick with the stock ext3 or we can actually use other file systems? Because I see that the BMM is made not to format partitions.
Sorry, I didn't really know much about this device, I'm just a new Atrix 2 user :D
 
  • Like
Reactions: mithun23

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
New Build 20181209

Highlights
- Removed unused system apps :good:
- Sony Xperia 4.4.4 system animations (identical to Xperia Z1 4.4.4) :cool:
- Lowered minimum brightness; you can now use your phone more comfortable in darker place :D

Check second post for changelogs.
 
  • Like
Reactions: mithun23

mithun23

Senior Member
Jan 27, 2013
154
120
Bangalore
Update of last post :
I can't imagine this happened to my CID... ahhhhh!
Mixed feelings..... :crying:

EDIT : I wonder if CID will be outputted on early boot? Anyone knows this? Or anyone knows how a CID looks like?

Yes every time you boot this cid error will appear. Even i lost this cid and at time my mobile was under warrenty. So i replaced with motorola service centre.
 

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
Yes every time you boot this cid error will appear. Even i lost this cid and at time my mobile was under warrenty. So i replaced with motorola service centre.

Oh, so lost CID also can replace device thru warranty, hmm this is really interesting
But since I can still use the phone, not a big deal to me as long as I don't plan to give/sell my phone to other people.

Last build has tons of codec problems. Will be fixed in upcoming build.
 
Last edited:
  • Like
Reactions: mithun23

mithun23

Senior Member
Jan 27, 2013
154
120
Bangalore
Oh, so lost CID also can replace device thru warranty, hmm this is really interesting
But since I can still use the phone, not a big deal to me as long as I don't plan to give/sell my phone to other people.

Last build has tons of codec problems. Will be fixed in upcoming build.
Yes it can...But I flashed stock ROM. And said motorola service centre some story tat ...after my battery was drained and after charging. Mobile is not booting and getting this cid error.
And what ... They replaced mobile :)
 
  • Like
Reactions: lee.wp14

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
New Build 20181221

Highlights
- Built-in Signature Spoofing support with ON/OFF switch in Developer Options (useful for MicroG)
- Enabled battery status LED notification feature
- Official build of Xposed framework is NOW SUPPORTED :D :laugh:
- Fixed video playback (that's due to one of my previous stupid commit :p )
- Fixed video recording (also, that's due to the previous stupid commit too :p :p :p )
- Better backlight adjustment when auto-brightness is enabled

Notes
- Use the official Xposed only, do not use the SolarWarez's patched version of xposed.
- Display casting seems won't work all the time, further testing needed! I only tested on a Bravia non-android smart tv which only established successful connection once in about my 50 attempts (and that one time working is not 100% working also due to codec problems).
- Video playback should be relatively fine now. However, do bear in mind that this doesn't means that you won't get any codec related problems anymore. Old omap4 devices are well-known for its codec problems.
- Video recording is relatively fine now. H264 based recording is not an issue anymore. But, the above thing applies to this too ;)
 

lee.wp14

Senior Member
Sep 15, 2015
524
401
Penang
Greetings to those who are using this ROM :
Thank you for using this ROM. I don't really want this, but recently I just received another Samsung Note 1.
So... that means I won't be using Atrix 2 anymore, and no more updates are to be expected.
Thanks again, and have a nice day!
 
  • Like
Reactions: mithun23

Top Liked Posts

  • There are no posts matching your filters.
  • 6



    logo-teal.png



    LineageOS 11.0 (Based on KitKat 4.4.4) for Motorola Atrix 2 (edison)


    DISCLAIMER
    Code:
    #include <std/disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    */
    * you point the finger at me for messing up your device, I will laugh at you.

    ROM INFO
    This is unofficial source-built LineageOS 11 aka CM11 for Motorola Atrix 2 (edison). Build is identical to CM11 builds by @alteredlikeness , in fact this build is built using his manifests. Huge thanks to him.
    I literally did nothing to get this build works - everything works flawlessly out of the box.
    Builds won't be updated unless I found problems that I could fix it myself, or I felt that there's nice features that I could cherry-pick to this build. Since Android 4.4.4 no longer receive updates, thus I don't see there's a necessity to have regular builds - means no updates or ETAs. Every build is considered a Final release.
    This build is here to give our beloved Atrix 2 a beautiful ending. :) At least, she gets to taste LineageOS now :good:

    ROM FEATURES
    It is just like previous CM11 builds, highly identical. Nothing special. No magic sauce. :D
    That's not true anyway, I can't resist from adding features that I love to have it on my phone :D Check changelogs or build highlights for added features ;)

    ROM BUGS
    Code:
     - WiFi : 5GHz not working, disabled in build
     - Display : Casting is not working (codec-related problem)
    Every release is personally tested on my Atrix 2 in System 2/3. Sometimes I'm steam enough to install on System 1 (this is not good, I lost my WhatsApp chats :p).
    Thus, this build is confirmed safe to install on both System 1, System 2 and System 3. Please perform clean flash if possible.

    ROM INSTALLATION
    *NEW USERS: Backup your CID from BMM Recovery is you haven't done so! (under Firmware Flashing section)
    1. Prepare SD Card, root access (ICS root or KingRoot) and Install BMM (available from my Google Drive)
    2. Proceed booting into BMM.
    3. Configure system as per your needs. For Boot Options, enable all except Insecure ADB (recommended)
    4. Enter BMM recovery. Format /system, /data and /cache.
    5. Proceed to flash ROM and other ZIPs.
    6. Reboot system. First boot won't take too long, you are good to go then!


    SIDE NOTES
    - ART works very well. :laugh: but latest 4.4 GAPPS won't work well with ART on 4.4 (Play Store will FC)
    - No more arm libs error for some modern apps (such as Flutter based apps), which exists in previous CM builds.
    - Xposed is working on this ROM. Use the official Xposed only, do not use SolarWarez's
    - This build works pretty fluid with GAPPS installed. However if you need maximum performance, you may use MicroG instead.
    - Signature spoofing is available out of the box, useful for MicroG users. Enable it in development settings.

    SOURCES


    XDA:DevDB Information
    [ROM] [UNOFFICIAL] LineageOS 11.0 - edison, ROM for the Motorola Atrix 2

    Contributors
    lee.wp14, alteredlikeness
    Source Code: https://github.com/leewp14

    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x
    Based On: LineageOS

    Version Information
    Status: Stable
    Stable Release Date: 2018-12-26

    Created 2018-12-28
    Last Updated 2018-12-28
    2
    New Build 20181226

    No major changes on this build, however if you happen to use the audio jack, please apply this build. Build 20181221 breaks the audio jack.
    2
    Wow! Sweet! And nice job!:good:
    I was very surprised to receive a mention notification today. Glad my long-forgotten past work could be of assistance in building this.

    Long live Edison!
    2
    New Build 20181221

    Highlights
    - Built-in Signature Spoofing support with ON/OFF switch in Developer Options (useful for MicroG)
    - Enabled battery status LED notification feature
    - Official build of Xposed framework is NOW SUPPORTED :D :laugh:
    - Fixed video playback (that's due to one of my previous stupid commit :p )
    - Fixed video recording (also, that's due to the previous stupid commit too :p :p :p )
    - Better backlight adjustment when auto-brightness is enabled

    Notes
    - Use the official Xposed only, do not use the SolarWarez's patched version of xposed.
    - Display casting seems won't work all the time, further testing needed! I only tested on a Bravia non-android smart tv which only established successful connection once in about my 50 attempts (and that one time working is not 100% working also due to codec problems).
    - Video playback should be relatively fine now. However, do bear in mind that this doesn't means that you won't get any codec related problems anymore. Old omap4 devices are well-known for its codec problems.
    - Video recording is relatively fine now. H264 based recording is not an issue anymore. But, the above thing applies to this too ;)
    1
    DOWNLOADS
    Builds are uploaded to my Google Drive. Click here to access.
    Look under directory : edison > lineage
    Compatible GAPPS, MicroG and other installers can also be found in directory : edison > misc

    *DO NOT MIRROR WITHOUT MY PERMISSION. Thank you.

    CHANGELOG
    Code:
    [U][B]20181226 [FINAL][/B][/U]
     - edison : Use back uevent for audio jack handling
    
    [U][B]20181221[/B][/U]
     - omap4-common : Generate bootanimation according to edison's actual display resolution
     - edison : Configure wifi refresh rate to every 150secs
     - edison : Disabled hardware acceleration
     - edison : Tweaked display auto-brightness value
     - edison : Configure zram according to Intel's paper
     - edison : Enabled battery status LED notification
     - frameworks/apps-settings : Added signature spoofing support with switch in Developer Options
     - frameworks : Bring back vm methods required by Xposed
     - dalvik : Do required whitelisting when Xposed is detected
    
    [U][B]20181209[/B][/U]
     - edison : ZRAM Enabled. disksize 400MB, swappiness 90
     - edison : vm and misc prop configs
     - edison : remove wifi dual band option
     - edison : minimum brightness is now 1 instead of 10 (more dim)
     - frameworks : merged Sony Kitkat firmware's system animations
    
    [U][B]20181208[/B][/U]
     - edison : Disable entropy
     - edison : Reduce VM page cluster to single only
     - omap4-common : (attempt) fix instagram video upload issue
     - kernel : optimize kernel clock tick
     - kernel : disable cpu governor hotplug
    
    [U][B]20181206[/B][/U]
    - Added CPU governor : Lionheart, Hotplug
    
    [U][B]20181205[/B][/U]
    - Initial build

    I will only write changelog for tested working builds :good: try at your own risk if you want to test it before me :3
    Those inside .trash folder are my test builds. Please, avoid this folder and other no changelog written build if you want to play safe. Thanks :p
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone