[ROM] [Unofficial LineageOS 7.1.2] [LG G3 Dual Sim D-856/7/8/9] [7.1.1]

[hector5]

Thank you for your reply... through my trying to fix showing picture in album.... Methinks if album contain more 300 pictures... some of pictures not show therefore i moved some pictures to folder and fixed this trouble..... Relatively I installed file manager & keyboard contain emoji but we want integral rom..... Thank you for attention & reply ?

 

[MirzaAwais]

Thank you for your reply... through my trying to fix showing picture in album.... Methinks if album contain more 300 pictures... some of pictures not show therefore i moved some pictures to folder and fixed this trouble..... Relatively I installed file manager & keyboard contain emoji but we want integral rom..... Thank you for attention & reply ?

Thanks good. Further its based on pure LOS version so adding something is ruined its purity ?. If you want to enjoy customizations then you need to try crdroid also based on LOS and compiled by same dev.

Sent from my LG-D858HK using Tapatalk

 

[powaq]

Hello,
First things first : a big thank you to the developper(s) who is (are) working on this device

I just got the LG G3 D858HK from my sister and I'd like to install your custom ROM.
Current state of the phone : full stock MM (V30a), not rooted, cleared from all personnal data.

I read almost the full thread but I'd still like to be guided through the process
First, how to install TWRP ?
I've read somewhere that I need to go back to Android 5 to flash TWRP : is that true ?
I have downloaded the 3.0.3-2 (D856) version. I don't think I can use use Flashify because the phone is not rooted. Am I right ?
I have ADB installed and I can see the device with "adb devices".

So, can somebody please give me the full procedure to install TWRP ?

thanks,
Pierre

 

[madafakakopele]

Hello,
First things first : a big thank you to the developper(s) who is (are) working on this device

I just got the LG G3 D858HK from my sister and I'd like to install your custom ROM.
Current state of the phone : full stock MM (V30a), not rooted, cleared from all personnal data.

I read almost the full thread but I'd still like to be guided through the process
First, how to install TWRP ?
I've read somewhere that I need to go back to Android 5 to flash TWRP : is that true ?
I have downloaded the 3.0.3-2 (D856) version. I don't think I can use use Flashify because the phone is not rooted. Am I right ?
I have ADB installed and I can see the device with "adb devices".

So, can somebody please give me the full procedure to install TWRP ?

thanks,
Pierre

You need autorec for d858 30a and then flash twrp 3.0.2 with flashify.

 

[Nebenfluss]

FM Radio app should work?

- it has not "LG FM-radio" in ROM.

Since Lineage 14.1 for the LG*G3 D855 has build-in and working FM Radio App (comes with Lineage): could this open source FM Radio app also be included in this Lineage Rom for the 858HK? I assume the 858HK has the same Qualcomm combo chip like the D855 has, so open source support for the FM function should be available as well - no?

 

[mnxheng]

D859 can't dial or SMS message

I'm using the latest LineageOS 7.1.2 . And my phone is LG G3 D859 China Telecom Dual card version.
I installed this ROM success and LTE network is work fine. But I can't take/pick up a phone call or send/receive SMS messages.
Would you please check this issue. Thank you!

---------- Post added at 05:50 AM ---------- Previous post was at 05:37 AM ----------

Oh, I just found the solution. Change the SIM config Prefer Network Type to 3G. Now it's perfect.

I'm using the latest LineageOS 7.1.2 . And my phone is LG G3 D859 China Telecom Dual card version.
I installed this ROM success and LTE network is work fine. But I can't take/pick up a phone call or send/receive SMS messages.
Would you please check this issue. Thank you!

 

[pinipin]

Since Lineage 14.1 for the LG*G3 D855 has build-in and working FM Radio App (comes with Lineage): could this open source FM Radio app also be included in this Lineage Rom for the 858HK? I assume the 858HK has the same Qualcomm combo chip like the D855 has, so open source support for the FM function should be available as well - no?

Fm radio would be great.

 

[ivomin]

Ok,
I've found several problems on G3DS (D858HK)....
1. OTG doesn't work. It recognizes the OTG cable but it doesn't get the plugged in device.
2. gps.conf file is wrong. This gives a lot of lag on GPS and inaccurate readings.... Here is stable file... I'm hosting it on my google drive: (EDIT - check bellow)
3. Bluetooth doesn't work well in phone mode. It works fine in A2DP but if you have to make a call you'll notice that the sounds are not rerouted through the Bluetooth. (I'll get log on the Bluetooth traffic soon to see what exactly is happening)...

Edit: Since my phone got dead I'll be dropping all g3 files I have... so here is the gps.conf file.

#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin

#Version check for XTRA
#DISABLE = 0
#AUTO = 1
#XTRA2 = 2
#XTRA3 = 3
XTRA_VERSION_CHECK=0

# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0

#Europe
NTP_SERVER=europe.pool.ntp.org
#Asia
#NTP_SERVER=asia.pool.ntp.org
#North America
#NTP_SERVER=north-america.pool.ntp.org
#Korea
#NTP_SERVER=0.kr.pool.ntp.org
#JP
#NTP_SERVER=3.jp.pool.ntp.org
#CN : China
#NTP_SERVER=1.cn.pool.ntp.org

# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 3

# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0

# Below bit mask configures how GPS functionalities
# should be locked when user turns off GPS on Settings
# Set bit 0x1 if MO GPS functionalities are to be locked
# Set bit 0x2 if NI GPS functionalities are to be locked
# default - non is locked for backward compatibility
#GPS_LOCK = 0

# supl version 1.0
#SUPL_VER=0x10000
# supl version 2.0
SUPL_VER=0x20000

# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=0

#Choose PDN for Emergency SUPL
#1 - Use emergency PDN
#0 - Use regular SUPL PDN for Emergency SUPL
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0

#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will over write the value from
#config.xml.
#MSA=0X2
#MSB=0X1
#SUPL_MODE=

# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x33

# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000

################################
##### AGPS server settings #####
################################

# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
SUPL_HOST=supl.google.com
SUPL_PORT=7275

# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234

# Bitmask of slots that are available
# for write/install to, where 1s indicate writable,
# and the default value is 0 where no slots
# are writable. For example, AGPS_CERT_WRITABLE_MASK
# of b1000001010 makes 3 slots available
# and the remaining 7 slots unwritable.
#AGPS_CERT_WRITABLE_MASK=0

####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 0

################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
#NMEA_PROVIDER=0
NMEA_PROVIDER=1
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=1

##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LPP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0

################################
# LGE EXTRA SETTINGS
################################
VENDOR=OPEN
LGE_TLS_MODE=1
LGE_GPS_POSITION_MODE=1

 

[yobolegend]

Me also USB OTG not working. And mirroring not working with Microsoft Wireless Display Adapter... Any advice, pls...

 

[yobolegend]

Is there any new update coming for this ROM,

tnx in advance

 

[Mucha333]

Problems with battery life and 4g.

 

[yobolegend]

Since Lineage 14.1 for the LG*G3 D855 has build-in and working FM Radio App (comes with Lineage): could this open source FM Radio app also be included in this Lineage Rom for the 858HK? I assume the 858HK has the same Qualcomm combo chip like the D855 has, so open source support for the FM function should be available as well - no?

New build has FM already.

Thnx to developers.

 

[pinipin]

New build has FM already.

Thnx to developers.

Just charging and will flash it
Thanks for the fm and the effort

 

[pinipin]

Flash it with pico open gaap.
Couldn't get root except adb root.
So flash magisk and mr bump.
Now I've got root.
The fm app doesn't work

 

[Muhammadsoli]

Thank you @MirzaAwais for your work. It is really good to have a developer like you supporting our device.
May I ask you a question. Aren't you considering buildning ResurrectionRemix Rom for dual sim g3?
I have used that rom on my previous devices and would be glad to test it on my current phone. Thanks

 

[hector5]

Please ....... HELP .....
Problem with Bluetooth I


I am not able to send any files through bluetooth using file manager ex : zip ...apk ....mp3 ...pdf
whenever i try to send the file its just show below error:--
"cannot sent :Unknown file 0 bytes".
i am using LG G3 858HK (Lineage Os 20170702). Although i can send pictures or video files through gallery app.But i want to send other type of files by file manager
Please help me. I have tried googling bt didnt find any solution.

Thank you very much

 

[khatrigang]

HI.. My d858 is running KitKat and Twrp 2.8.

But when i am trying to wipe data or anything from twrp.. it says failed.

1. Do i need to update my recovery? If yes plz suggest one.
2. Or do i also need to upgrade to Marshmallow first ?
3. Or i need any other bootloader?

 

[hector5]

HI.. My d858 is running KitKat and Twrp 2.8.

But when i am trying to wipe data or anything from twrp.. it says failed.

1. Do i need to update my recovery? If yes plz suggest one.
2. Or do i also need to upgrade to Marshmallow first ?
3. Or i need any other bootloader?

Here you are ....this recovery twrp its working very well

For lg g3 d856 / 7/ 8hk/ 9
https://www.androidfilehost.com/?fid=457095661767128791

 

[Deleted member 4258086]

a new build is up , this time with close to stock LOS kernel

 

[mariosm1cy]

2. gps.conf file is wrong. This gives a lot of lag on GPS and inaccurate readings.... Here is stable file... I'm hosting it on my google drive: https://drive.google.com/file/d/0B0vEv0xiXRZKbkJXWXA5WlVwNUU/view?usp=sharing

Thanks man, i copied the file. I noticed that gps is behaving weird since leaving fulmics rom. I thought of going back. But if this works im happy.