[ROM][UNOFFICIAL][matisse][millet] crDroid 6.27 (Discontinued)

Search This thread
My Tablet: SM-T330 crDroid 6.17 Working perfect!

Before Andrdoid 5.0.2 and now Android 10!

The Open GApps pico 10 package kept crashing, but BiTGapps works fine on my SM-T330.
WiFi and Bluetooth do their job without any problems. General features are OK.

Problem encountered:
send screen not working
Wifi 5Ghz not detected

I have been able to give a second life to my tablet.
Great job, Have a lot of thanks
 

matteo0026

Senior Member
Jul 1, 2015
1,595
987
23
Treviso
Lenovo P2
BQ Aquaris X Pro
My Tablet: SM-T330 crDroid 6.17 Working perfect!

Before Andrdoid 5.0.2 and now Android 10!

The Open GApps pico 10 package kept crashing, but BiTGapps works fine on my SM-T330.
WiFi and Bluetooth do their job without any problems. General features are OK.

Problem encountered:
send screen not working
Wifi 5Ghz not detected

I have been able to give a second life to my tablet.
Great job, Have a lot of thanks
What do you mean by "send screen"? About 5GHz WiFi, it depends on which band you enable it. In my case, with band 36, it works fine. Some months ago, a user told me that 5 GHz WiFi in custom ROMs didn't work from band 149 to 161, if I'm not wrong.
 

Attachments

  • 16191011000079138404029802205111.jpg
    16191011000079138404029802205111.jpg
    2 MB · Views: 20
¿Qué quieres decir con "enviar pantalla"? Aproximadamente 5GHz WiFi, depende de la banda que lo habilite. En mi caso, con la banda 36, funciona bien. Hace algunos meses, un usuario me dijo que el WiFi de 5 GHz en ROM personalizadas no funcionaba de la banda 149 a la 161, si no me equivoco.
1619103521867.png

"enviar pantalla"
Thanks , 5GHz WiFi solved.
 
Last edited:
It's Co...d-Time and what to do at staying home? Right, Flashing old Devices to new life :cool:

Device: matissewifi (smt530)


before:
- lineage-14.1(-20170123-UNOFFICIAL-matissewifi) + twrp-3.0.0.0-matissewifi

after:
- twrp-3.5.2_9-0-matisse + crDroidAndroid-10.0-20210415-matissewifi-v6.17


Updated TWRP via ZIP from 3.0 -> 3.5.2 + reboot. All looks fine. "OLD" ROM (LOS14) starts.
Shutdown, boot into recovery and flashed crDdroid v6.17 + reboot = stucking in/at "Bootlogo". It loads and loads and loads........

At recovery: Delete Cache/Dalvik + reboot = same
At recovery: Try to "Fix Contexts" + reboot = same

Tried another ROM like:
- crDroidAndroid-9.0-20210306-matissewifi-v5.12
- lineage-17.1-20210417-UNOFFICIAL-matissewifi

Both boot and starting Android.

Any Ideas for old men with old phones/tablets?

regards
Shugga


PS:
System complained about the size of gAPPS or the Patition-Size. If i try to install
open_gapps-arm-10.0-full-20210422 + crDroidAndroid-10.0-20210415-matissewifi-v6.17

LOG = Insufficient storage space available in System partition. You may want to use a smaller....

Thougt this ROM is for the SM-T530


PPS: THANKS FOR this GREAT & HARD WORK for our loving devices.
 
  • Like
Reactions: mrk2815

IamTheBRAVE

Senior Member
It's Co...d-Time and what to do at staying home? Right, Flashing old Devices to new life :cool:

Device: matissewifi (smt530)


before:
- lineage-14.1(-20170123-UNOFFICIAL-matissewifi) + twrp-3.0.0.0-matissewifi

after:
- twrp-3.5.2_9-0-matisse + crDroidAndroid-10.0-20210415-matissewifi-v6.17


Updated TWRP via ZIP from 3.0 -> 3.5.2 + reboot. All looks fine. "OLD" ROM (LOS14) starts.
Shutdown, boot into recovery and flashed crDdroid v6.17 + reboot = stucking in/at "Bootlogo". It loads and loads and loads........

At recovery: Delete Cache/Dalvik + reboot = same
At recovery: Try to "Fix Contexts" + reboot = same

Tried another ROM like:
- crDroidAndroid-9.0-20210306-matissewifi-v5.12
- lineage-17.1-20210417-UNOFFICIAL-matissewifi

Both boot and starting Android.

Any Ideas for old men with old phones/tablets?

regards
Shugga


PS:
System complained about the size of gAPPS or the Patition-Size. If i try to install
open_gapps-arm-10.0-full-20210422 + crDroidAndroid-10.0-20210415-matissewifi-v6.17

LOG = Insufficient storage space available in System partition. You may want to use a smaller....

Thougt this ROM is for the SM-T530


PPS: THANKS FOR this GREAT & HARD WORK for our loving devices.
Try resizing your system partition in wipe menu. Maybe it'll help...
 
  • Like
Reactions: mrk2815

n3fashu

Member
Apr 19, 2021
7
2
It's Co...d-Time and what to do at staying home? Right, Flashing old Devices to new life :cool:

Device: matissewifi (smt530)


before:
- lineage-14.1(-20170123-UNOFFICIAL-matissewifi) + twrp-3.0.0.0-matissewifi

after:
- twrp-3.5.2_9-0-matisse + crDroidAndroid-10.0-20210415-matissewifi-v6.17


Updated TWRP via ZIP from 3.0 -> 3.5.2 + reboot. All looks fine. "OLD" ROM (LOS14) starts.
Shutdown, boot into recovery and flashed crDdroid v6.17 + reboot = stucking in/at "Bootlogo". It loads and loads and loads........

At recovery: Delete Cache/Dalvik + reboot = same
At recovery: Try to "Fix Contexts" + reboot = same

Tried another ROM like:
- crDroidAndroid-9.0-20210306-matissewifi-v5.12
- lineage-17.1-20210417-UNOFFICIAL-matissewifi

Both boot and starting Android.

Any Ideas for old men with old phones/tablets?

regards
Shugga


PS:
System complained about the size of gAPPS or the Patition-Size. If i try to install
open_gapps-arm-10.0-full-20210422 + crDroidAndroid-10.0-20210415-matissewifi-v6.17

LOG = Insufficient storage space available in System partition. You may want to use a smaller....

Thougt this ROM is for the SM-T530


PPS: THANKS FOR this GREAT & HARD WORK for our loving devices.
Try v6.16, works fine ;D
Had the same bootloop issue with the V6.17
 
  • Like
Reactions: subattack

matteo0026

Senior Member
Jul 1, 2015
1,595
987
23
Treviso
Lenovo P2
BQ Aquaris X Pro
It's Co...d-Time and what to do at staying home? Right, Flashing old Devices to new life :cool:

Device: matissewifi (smt530)


before:
- lineage-14.1(-20170123-UNOFFICIAL-matissewifi) + twrp-3.0.0.0-matissewifi

after:
- twrp-3.5.2_9-0-matisse + crDroidAndroid-10.0-20210415-matissewifi-v6.17


Updated TWRP via ZIP from 3.0 -> 3.5.2 + reboot. All looks fine. "OLD" ROM (LOS14) starts.
Shutdown, boot into recovery and flashed crDdroid v6.17 + reboot = stucking in/at "Bootlogo". It loads and loads and loads........

At recovery: Delete Cache/Dalvik + reboot = same
At recovery: Try to "Fix Contexts" + reboot = same

Tried another ROM like:
- crDroidAndroid-9.0-20210306-matissewifi-v5.12
- lineage-17.1-20210417-UNOFFICIAL-matissewifi

Both boot and starting Android.

Any Ideas for old men with old phones/tablets?

regards
Shugga


PS:
System complained about the size of gAPPS or the Patition-Size. If i try to install
open_gapps-arm-10.0-full-20210422 + crDroidAndroid-10.0-20210415-matissewifi-v6.17

LOG = Insufficient storage space available in System partition. You may want to use a smaller....

Thougt this ROM is for the SM-T530


PPS: THANKS FOR this GREAT & HARD WORK for our loving devices.
I always advice to flash a small gapps package. Full is too big. About ROM build, flash 6.16 as someone else told
 
Are you sure you have installed latest firmware based on Android 5.0.2? Because probably, android 7 didn't require it, but these new ROMs yes
dont think so. it was serveral years ago.

PS: crDroid 6.16 works (out of the box)
...but even ALL gAPPs are corrupt said TWRP.
7zip checks - The files ok. ONLY "full" (what is too big) to installing (expect the LOS-17.1-ROM)

Is that while the firmware is not right? I dont think so, but i know not all?

Edit:
Flashing at the moment Android Lollipop 5.0.2 - Stock ROM. will report after flashing again 6.17


Edit2
some time and a meal passed away but the 6.17er wont work for me.
Flashed Samsung Stock 5.0.2, reflash TWRP + ROM and ....
... 6.17 wont load proper
... 6.16 läuft wie geschmiert (engl. works like Clockwork)
... no gAPPs till now - but i will survive this :-/
 
Last edited:

kurumbass

Member
Apr 23, 2021
5
2
SM t531:

6.16 + BiTGApps-arm-10.0.0-R25 works fine. (charging when it is off, but gps is dead)

6.17 + BiTGApps-arm-10.0.0-R25 "Bootlogo". It loads and loads and loads........(tried to wait 1 hour, but unresulted)

lineage-16.0-20210409 - it is the best speed and stable working, but gps is dead too and off charging is imposible.



As for me charging when device is off really needful. My choice 6.16 + BiTGApps.

Still waiting to see new android for sm t230+++!)))

Thank you for your hard working! You are GREAT MEN! A lot of old tablets have a new life!

Best regards! In future i hope you will make the firmware better and better! Good luck! Have fun!
 

matteo0026

Senior Member
Jul 1, 2015
1,595
987
23
Treviso
Lenovo P2
BQ Aquaris X Pro
dont think so. it was serveral years ago.

PS: crDroid 6.16 works (out of the box)
...but even ALL gAPPs are corrupt said TWRP.
7zip checks - The files ok. ONLY "full" (what is too big) to installing (expect the LOS-17.1-ROM)

Is that while the firmware is not right? I dont think so, but i know not all?

Edit:
Flashing at the moment Android Lollipop 5.0.2 - Stock ROM. will report after flashing again 6.17
Remember to try 6.16 too if 6.17 doesn't work.
SM t531:

6.16 + BiTGApps-arm-10.0.0-R25 works fine. (charging when it is off, but gps is dead)

6.17 + BiTGApps-arm-10.0.0-R25 "Bootlogo". It loads and loads and loads........(tried to wait 1 hour, but unresulted)

lineage-16.0-20210409 - it is the best speed and stable working, but gps is dead too and off charging is imposible.



As for me charging when device is off really needful. My choice 6.16 + BiTGApps.

Still waiting to see new android for sm t230+++!)))

Thank you for your hard working! You are GREAT MEN! A lot of old tablets have a new life!

Best regards! In future i hope you will make the firmware better and better! Good luck! Have fun!
GPS works fine. It's just a lot lazy. I had to stay outdoor for about 1 minute to get a 3D fix. Here is a picture, coming from LOS17.1, but I can ensure that it works fine on all other Android 9 and 10 ROMs. Offmode charging should work fine. It just takes some time to come into the charging animation. Offline charging picture coming from LOS 17.1 too.
T23x won't never be supported from me. They're completely different, I'm starting lacking of time and I have a slow PC
 

Attachments

  • IMG_20210423_215235_906.jpg
    IMG_20210423_215235_906.jpg
    1.6 MB · Views: 8
  • IMG_20210423_215852_046.jpg
    IMG_20210423_215852_046.jpg
    1.9 MB · Views: 8
  • Like
Reactions: mrk2815

mrk2815

Senior Member
May 16, 2012
1,551
341
burbank
have not had any issues, but with sm330 nu, millet wi fi 8 inch tablet . i did a clean install. i did use cr droid 6.17, along side gapps micro. No issues installed and successfully booted an configured. so far so good.
 
  • Like
Reactions: crazydrive22

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    crDroid is a LineageOS-based CustomRom.
    This one is based on LOS 17.1.
    Special Thanks to matteo0026, who is maintaining the device sources and TWRP.

    Disclaimer
    I am not responsible for lost data, identity theft, lost money, security vulnerabilities, bricked devices or any other hardware or software malfunctions or a nuclear war that comes as a result of flashing this ROM. Please make also be sure that you have always a full backup ready. Best to use: Nandroid Backup via TWRP


    Installation instructions :
    • Be sure to have installed the latest TWRP recovery (you can find it in downloads)
    • Download the latest build and GApps (ARM, 9.0, I advice pico package) and copy it to your external SD-Card
    • Make a full Backup of your Data and copy it to your external SD-Card or USB-OTG
    • Boot to recovery mode
    • Wipe > Advanced wipe > Select system, data, cache and dalvik/art cache (and, if you want to clean more, select even internal storage, which deletes all the content in /sdcard) and do swipe to wipe. Format /data. When it's finished go to home page
    • Install > select ROM zip file > swipe to flash and when it's finished go to home page
    • Do the same thing to flash GApps and Root (if needed)
    • Reboot > System
    Update instructions :
    • Be sure to have installed latest TWRP build
    • Download the latest build
    • Boot to recovery mode
    • Install > select ROM zip file > swipe to flash and, when it's finished go to home page
    • Reboot > System
    Known issues :

    crDroid 5.12 (discontinued)

    • This ROM is discontinued because of not fixable bugs.
    • Matisse is working but better use 6.xx or 7.xx
    • All Millet Devices -> Camera is not working, no fix so far.
    crDroid 6.xx (discontinued)
    • Camera is working at all Devices
    • Face Unlock is working at all Devices

    Downloads :

    crDroid 5.12 (discontinued)

    crDroid 6.xx (discontinued)
    Other Stuff

    Contributors:
    crazydrive22, matteo0026 and all the S3NEO devs that provided the base for developing Pie on Tab 4

    Source Code:


    Thread started at 2021-01-31
    Thread updated at 2022-06-25
    3
    crDroid 6.16

    Millet-User, new Builds are up. Matisse will follow this evening.

    Changelog:
    -Synced with LOS-Source
    -Security-Patch from April 2021
    -A lot of work under the Hood from Matteo.

    There's also a new Version of TWRP. You'll find the link in OP.

    I've decided to focus on crDroid 6.16 and let crDroid 5.12 discontinued.
    crDroid 7.x will follow but it will take a while.
    2
    Hi,
    Flash does not work with twrp 3.0.0, but this is the latest official twrp.
    Can you suggest a TWRP version for this ROM?

    Hi All,
    TWRP 3.4.0-4 by Matteo works. My device is Milletwifi.

    So this ROM LOS16 Feb Build has issues. Camera does not work, same as Matteo's LOS 16. In fact this ROM appears to be identical to Matteo's LOS16. Apart from being compiled, by Crazydrive22. Therefore different title in About. Not sure what Crazydrive22 is trying to achieve here, apart from proving the Compile works, using the same repository sources as Matteo.

    Sorry Guys, i was very busy the last time.

    Matteo decided to go to LOS17 and LOS18, so I will build LOS16 for the future.
    That's why we are building side by side, to check if everything is working well.
    And as you've seen, it was a good idea. :)
    With the next build (around 5th of March) everything should work on Millet, except the Camera.
    2
    I tried to download the updated ROM. In the link in OP there are the old files. There is no trace of the 04/2021 patch update for millet
    There is an issue in device source. I'm investigating with @crazydrive22 to fix it. More in detail, we are trying to build wifi driver as module because otherwise millet devices have too big recovery.img file. You would ask me: why fixing recovery size if nobody ships the one with the ROM (lineage recovery)? Since I want to do good works, I try to be as precise as possible.
    2
    Working perfect! No bugs!
    When update to Android 10.0?

    My Tablet: SM-T530
    Before Andrdoid 5.0.2 and now Android 9.0!

    I'm planning to go to 10 and also 11 but there's no ETA atm. I'm working with Matteos Device Sources, so as soon he's ready, i'll be, too. :)