[ROM][UNOFFICIAL][montana][9.0.0_r46] LineageOS 16.0
- Thread starter JarlPenguin
- Start date
I have a question. Because I have 2 xt1799-2. I backup the 2 devices in twrp. I did a test before. In the twrp 'Restore' page, it can't recognize the backup file of the other xt1799-2. It seems it recognize the 'Serial Number'
Can't you just rename folder to your serial number?
You can also flash file by file on fastboot just like stock ROM
Fastboot flash userdata data.f2fs.win
And so on
Can Also replace only big files inside already existing folder like system_image.emmc.win
Found this
TWRP restore: backup not seen in different device (same model)
I have 2 pieces of the same device (crackling) and I wanted to clone #1 onto #2. Both are running TWRP 3.4.0. I ran backup (unencrypted) to SD card on #1. Backup data is stored on the SD card in TWRP/
Last edited:
Okay, I'll try it tomorrow. It's late at midnight now. Have a good rest and good night, bro.
I'm more concerned about the battery. But lineageos 18.1 is very bad.
I have an old record of lineageos 18.1 build 20230401
Aeroplane mode
Only use 7 minutes 'taobao' app.
After 18 hours, 100-(2+2+2+1)=93, but it only left 68%
93-68=25.
What drains that 25% !
lineageos 17.1 (64bit )
17.1-20201115
Battery is as bad as 18.1.
After 9 hours aeroplane mode
100-1-1=98
98-89=9
9% was consumed by something unknown.
lineageos 16 (64bit)
16.0-20190516
Battery is good, but it has the copy bug.
Front camera not works for xt1799-2
Copy bug. (It's said that in lineageos 16 last build 20200918 the bug has been fixed. But after I flash it, it has a boot error. )
lineage-16.0-20200918-UNOFFICIAL-montana.zip
lineageos 15.1 (64bit)
15.1-20190429
Battery is good
Fingerprint works
Volte works (no need to root)
Front camera doesn't for xt1799-2
Copy bug.
moto stock oreo 8.1.0 (32bit)
Battery is excellent!
Front camera works for xt1799-2. (Neet to flash this firmware: https://forum.xda-developers.com/t/...-1-0-oreo-for-xt1799-2-montana_retcn.4238073/)
Fingerprint works in 57R baseband version.
Volte (root and modify the build.prop)
But 32bit
My conclusion is that if you use the g5s as a second device and you need 64bit, stay in lineageos 15.1 or 16.
Last edited:
that ok copy bug is annoying but like I said you could use adb pull
lineage 18 battery is used by light sensor so the screen can turn on whenever the phone moves or room light turns on or off
you can also put your finger on the white circle across the camera.
lineage 17 battery is used by wifi and simcard drivers
9% after 9 hours is actually really good to be honest
I'm now using a file manager's wireless file transfer function to send the screenshot to my pc. But it can only transfer one file each time, otherwise files will be compressed to a .zip file.
Therefore if I need to transfer more than 5 files, I'll insert a TF card in the device.
[APP][2.2+] MiXplorer v6.x Released (fully-featured file manager)
[APP][2.2+] MiXplorer (full-featured file manager) Hello everyone! My name is Hootan. I work on XDA in my free time and this file explorer is my favorite Android project! MiXplorer mix of explorers (SD, FTP, Lan, Cloud and other storage...
forum.xda-developers.com
This APP can transfer multiple files but you need samba and that's complicated on windows
Would be better if you installed linux on your pc
[APP][2.2+] MiXplorer v6.x Released (fully-featured file manager)
[APP][2.2+] MiXplorer (full-featured file manager) Hello everyone! My name is Hootan. I work on XDA in my free time and this file explorer is my favorite Android project! MiXplorer mix of explorers (SD, FTP, Lan, Cloud and other storage...
This APP can transfer multiple files but you need samba and that's complicated on windows
Would be better if you installed linux on your pc
I install an FTP app in my device, and I use FlashFXP software in my PC. Now I can transfer many files at the same time.
[APP][2.2+] MiXplorer v6.x Released (fully-featured file manager)
[APP][2.2+] MiXplorer (full-featured file manager) Hello everyone! My name is Hootan. I work on XDA in my free time and this file explorer is my favorite Android project! MiXplorer mix of explorers (SD, FTP, Lan, Cloud and other storage...
This APP can transfer multiple files but you need samba and that's complicated on windows
Would be better if you installed linux on your pc
Hi, bro, I forgot to ask your g5s version? Yours is xt179*?
Does your front camera work in the last build of lineageos 16.0 , the one without copy bug. But I have boot error, you remember that?
lineage-16.0-20200918-UNOFFICIAL-montana.zip
https://github.com/moto-msm89xx/rel.../lineage-16.0-20200918-UNOFFICIAL-montana.zip
If you flash it again in the future, can you make a whole backup of all partitions? I try to restore them to my device to see if it still has a boot error.
[APP][2.2+] MiXplorer v6.x Released (fully-featured file manager)
[APP][2.2+] MiXplorer (full-featured file manager) Hello everyone! My name is Hootan. I work on XDA in my free time and this file explorer is my favorite Android project! MiXplorer mix of explorers (SD, FTP, Lan, Cloud and other storage...
This APP can transfer multiple files but you need samba and that's complicated on windows
Would be better if you installed linux on your pc
Hey, bro. I find some interesting roms. I'm studying how to flash it.
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
Read the readme.txt file in the page.
Have you ever flashed it?
_________________________________________________
OEM firmwares ported to GSI (not semi) using ErfanGSI Tools
How to install on AB:
1) install img into system partition
2) flash permissiver_v4.zip
3) reboot
How to install on A-Only:
1) install img into system partition
2) flash permissiver_v4.zip
(if flashing android 10 GSI) 2.5) flash FixZygote_v2.zip
4) reboot
if images didn't worked properly post your logs(logcat and console-ramoops) on https://github.com/erfanoabdi/ErfanGSIs/issues i'll come for help
Tools: https://www.androidfilehost.com/?w=files&flid=279429
Logcat without PC: take /data/local/tmp/logs/log
source: https://github.com/erfanoabdi/ErfanGSIs
How to use Tools: https://thespandroid.blogspot.com/2019/07/how-to-port-oem-specific-roms-as-gsi.html
_________________________________________________
How To Port OEM Specific ROMs as GSI Using ErfanGSI Tool
Most of the people may not understand the meaning of title this post but if you ever read about Generic System Images i.e GSI then you have understood it. Back in kitkat, lollipop and Marhsmallow days people used to port ROMs, they still do from other devices with similar specifications. Its a tedious work to find phones with most similar specification and OS version. After the implementation of Treble in Oreo, it has become very easy (kind of) to port OEM specific systems. In easy words - You can port MIUI from Xiaomi, OxygenOS/HydrogenOS from One Plus, ZenUI, ZUI , Nubia UI and some more. Well, you need a treble supported phone with either 8.1, 9.0 or 10 Android Version. These GSIs will not work on Pre-Oreo Versions of Android.ErfanGSI tool by developer Erfan Abdi is the best tool available for porting OEM specific ROMs. You can build a GSI just in just one or two minutes once you understood how it works. It is very user friendly tools where you have to just type some commands and tool will handle the rest of the porting process. Don't expect a perfectly working GSI from this tool because all OEM specific systems are different and system structure varies with each different device specially when the processor is different. Bugs will depend on the treble ROM of your device as well.
LineageOS 16.0 v0.14
Changelog:
Fixed NFC on XT1793/4 (thanks to @CypherNoodle for helping me)
Fixed compass on XT1790/1
Fixed "There's a problem with your device." error (thanks to @wiktorek140)
Fixed MTP (thanks to @sohamlad7)
lineage-16.0-20200101-UNOFFICIAL-montana.zip
This lineageos 16 version has fixed the copy bug! I just flashed it. But front camera doesn't work for xt1799-2.
Sure, but boot issue is kernel problem. I think the way you flash the rom has nothing to do with it.Hi, bro, I forgot to ask your g5s version? Yours is xt179*?
Does your front camera work in the last build of lineageos 16.0 , the one without copy bug. But I have boot error, you remember that?
lineage-16.0-20200918-UNOFFICIAL-montana.zip
https://github.com/moto-msm89xx/rel.../lineage-16.0-20200918-UNOFFICIAL-montana.zip
If you flash it again in the future, can you make a whole backup of all partitions? I try to restore them to my device to see if it still has a boot error.
Same error for me on ProtonAosp. I tried every twrp and every different way of flash but it doesn't even show boot animation.
Will try but I think it may not workHey, bro. I find some interesting roms. I'm studying how to flash it.
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5aimirrors.lolinet.com
Read the readme.txt file in the page.
Have you ever flashed it?
View attachment 5920191
_________________________________________________
OEM firmwares ported to GSI (not semi) using ErfanGSI Tools
How to install on AB:
1) install img into system partition
2) flash permissiver_v4.zip
3) reboot
How to install on A-Only:
1) install img into system partition
2) flash permissiver_v4.zip
(if flashing android 10 GSI) 2.5) flash FixZygote_v2.zip
4) reboot
if images didn't worked properly post your logs(logcat and console-ramoops) on https://github.com/erfanoabdi/ErfanGSIs/issues i'll come for help
Tools: https://www.androidfilehost.com/?w=files&flid=279429
Logcat without PC: take /data/local/tmp/logs/log
source: https://github.com/erfanoabdi/ErfanGSIs
How to use Tools: https://thespandroid.blogspot.com/2019/07/how-to-port-oem-specific-roms-as-gsi.html
_________________________________________________
How To Port OEM Specific ROMs as GSI Using ErfanGSI Tool
Most of the people may not understand the meaning of title this post but if you ever read about Generic System Images i.e GSI then you have understood it. Back in kitkat, lollipop and Marhsmallow days people used to port ROMs, they still do from other devices with similar specifications. Its a tedious work to find phones with most similar specification and OS version. After the implementation of Treble in Oreo, it has become very easy (kind of) to port OEM specific systems. In easy words - You can port MIUI from Xiaomi, OxygenOS/HydrogenOS from One Plus, ZenUI, ZUI , Nubia UI and some more. Well, you need a treble supported phone with either 8.1, 9.0 or 10 Android Version. These GSIs will not work on Pre-Oreo Versions of Android.
ErfanGSI tool by developer Erfan Abdi is the best tool available for porting OEM specific ROMs. You can build a GSI just in just one or two minutes once you understood how it works. It is very user friendly tools where you have to just type some commands and tool will handle the rest of the porting process. Don't expect a perfectly working GSI from this tool because all OEM specific systems are different and system structure varies with each different device specially when the processor is different. Bugs will depend on the treble ROM of your device as well.
This phone has GSI but it's not "full treble"
I'm not sure what that means but it probably means not fully supported.
I found two websites about this. But they're in Chinese. I'll translate his main idea for you.
______________________________
17年后的联想机子和MOTO机子都通用的gsi刷机包（至少80%）。自己用两天时间一个个gsi包刷了一遍【摩托罗拉吧】_百度贴吧
17年后的联想机子和..17年后的联想机子和MOTO机子都通用的gsi刷机包（至少80%）。自己用两天时间一个个gsi包刷了一遍，总结的比较稳定可以正常使用的包。MIUI，氢os，Sony Xperia。分享给大家。
tieba.baidu.com
The guy has a moto g7. He said the devices of lenovo and moto launched after 2017 can flash that GSI (at least 80% of the devices).
He has tried every GSI rom, and was only stable in MiUI, HydrogenOS, Sony Xperia OS.
He reminds us that because they are all based on android 9, we'd better flash lineageos 16 first, then flash the GSI after that.
He says that the inbuilt camera doesn't work. But the third party camera is ok. Better use the google camera.
He says 'Format Data' both before flashing lineageos 16.0 and GSI (in twrp 'Wipe' page).
Unzip the .7z file in your PC, and 'Install Image' in twrp 'Install' page
______________________________
But I did flash lineageos 16 last night, but I failed to flash the ZUI GSI. It was stuck in the moto bootlogo. Maybe it doesn't work for the ZUI GSI. I'll try the Xperia OS later.
The following website is a flashing instruction. It's also written in Chinese. I'll translate some key messages for you.
安卓手机刷入 GSI 镜像教程 - 刷机党资源网
从理论上来说，刷入某个GSI，你的手机就会摇身一变，从一个系统切换到了另一个系统。GSI的全称是GenericSystemImage，翻译过来就是「通用系统镜像」，这个概念来源于ProjectTreble。自从Android8引入ProjectTreble后，手机的系统文件和底层的厂商硬件驱动开始分离存放，更新系统时只需要更新系统文件即可。此项举措意在方便厂商加快An...
www.irom.net
It seems that the instruction in the page is for all the devices.
First download an app. 'Treble Check'. To check if the device is project treble supported.
I did it last night. Moto stock oreo 8.1.0 of moto g5s is not supported. But after I flashed the lineageos 16.0, it's supported!
The following build of lineageos 16.0 has fixed the copy bug. But the front camera doesn't work for my xt1799-2.
_________________________________
LineageOS 16.0 v0.14
Changelog:
Fixed NFC on XT1793/4 (thanks to @CypherNoodle for helping me)
Fixed compass on XT1790/1
Fixed "There's a problem with your device." error (thanks to @wiktorek140)
Fixed MTP (thanks to @sohamlad7)
lineage-16.0-20200101-UNOFFICIAL-montana.zip
_________________________________
'Seamless System updates' is not supported. It means that you can only download the 'A-only' file.
It says if the stock rom is under android 8 and below, and not support 'seamless system updates', we should download the 'A-only' GSI file.
If the stock rom is above android 9, no matter the ''seamless system updates' is supported or not, must download the 'AB' GSI file.
Installing instruction. (It's different from the readme.txt file in the download website.)
1. flash twrp
2. In twrp steps:
Wipe: It just says double wipe, actually I don't exactly know what it means. They always said that in the Chinese instruction. I dislike that. Why they just can not say it in detail?!
Just need to type a few more words. It maybe 'Format Data' and 'Advanced Wipe' - 'Dalvik / Art Cache , Data, Cache' (I don't know whether 'System' is needed to be chosen. But I do choose it.)But remember don't choose 'Vendor', otherwise you can't even see the moto bootlogo.
Install: tap 'Insall Image' - 'Select Storage' - choose the image file (upzip from the .7z file before.) - 'Select Partition to Flash Image' choose 'System Image'
After it finishes, double wipe again. (I think it means 'Wipe' - 'Format Data' and 'Advance Wipe' - 'Dalvik / ART Cache , Data , Cache', no need to choose 'System' this time.)
Method 2 is a fastboot method. Because I haven't used some softwares mentioned in the page. So I won't translate it for you.
You can search the other instructions on the website (My searching keywords are 'twrp flash GSI') and have a try. I failed to flash the ZUI GSI (fail to boot the system), maybe you can try the Xperia OS.
If you success, do you mind telling me the steps in detail, bro?
Thanks a lot.Update 20230528 19:00:
My steps above are right, I success in flashing the Xperia OS.
twrp steps:
1. Wipe - format data - yes
Advanced wipe - choose : Dalvik / Art Cache , Data, Cache , System
2. Install - Install Image - Choose the .img file upzip from the .7z file - 'Select Partition to Flash Image' choose 'System Image'
After it finishes, go back to 'Wipe'.
Wipe - format data - yes
Advanced wipe - choose : Dalvik / Art Cache , Data, Cache (No 'System' this time)
After a 5-10 minutes boot time, I'm now in Xperia OS. Base on XZ3.
But very buggy. Lots of bugs.
No navigation bar!!! I can only swipe down the quick setting center to enter the system settings. It only has a one button navigation bar setting, but the button doesn't appear.
Camera app crashes.
No sounds. 'Phone ringtone, notification sound, alarm sound' all are not contained in the system.
It's just a disaster.
The animation of the 'Picture' app is very interesting.
Volte works for my xt1799-2.
ZUI-Aonly-9-20190617-ErfanGSI.img.7z
ZUI-Aonly-9-20190617 is installed successfully.
But front camera doesn't work for my xt1799-2.
Network doesn't work.
Last edited:
yeah i knew it would be like thisI found two websites about this. But they're in Chinese. I'll translate his main idea for you.
______________________________
View attachment 592064517年后的联想机子和MOTO机子都通用的gsi刷机包（至少80%）。自己用两天时间一个个gsi包刷了一遍【摩托罗拉吧】_百度贴吧
17年后的联想机子和..17年后的联想机子和MOTO机子都通用的gsi刷机包（至少80%）。自己用两天时间一个个gsi包刷了一遍，总结的比较稳定可以正常使用的包。MIUI，氢os，Sony Xperia。分享给大家。
View attachment 5920647
The guy has a moto g7. He said the devices of lenovo and moto launched after 2017 can flash that GSI (at least 80% of the devices).
He has tried every GSI rom, and was only stable in MiUI, HydrogenOS, Sony Xperia OS.
He reminds us that because they are all based on android 9, we'd better flash lineageos 16 first, then flash the GSI after that.
View attachment 5920651
He says that the inbuilt camera doesn't work. But the third party camera is ok. Better use the google camera.
View attachment 5920693
He says 'Format Data' both before flashing lineageos 16.0 and GSI (in twrp 'Wipe' page).
Unzip the .7z file in your PC, and 'Install Image' in twrp 'Install' page
______________________________
But I did flash lineageos 16 last night, but I failed to flash the ZUI GSI. It was stuck in the moto bootlogo. Maybe it doesn't work for the ZUI GSI. I'll try the Xperia OS later.
The following website is a flashing instruction. It's also written in Chinese. I'll translate some key messages for you.
View attachment 5920659安卓手机刷入 GSI 镜像教程 - 刷机党资源网
从理论上来说，刷入某个GSI，你的手机就会摇身一变，从一个系统切换到了另一个系统。GSI的全称是GenericSystemImage，翻译过来就是「通用系统镜像」，这个概念来源于ProjectTreble。自从Android8引入ProjectTreble后，手机的系统文件和底层的厂商硬件驱动开始分离存放，更新系统时只需要更新系统文件即可。此项举措意在方便厂商加快An...
It seems that the instruction in the page is for all the devices.
First download an app. 'Treble Check'. To check if the device is project treble supported.
I did it last night. Moto stock oreo 8.1.0 of moto g5s is not supported. But after I flashed the lineageos 16.0, it's supported!
The following build of lineageos 16.0 has fixed the copy bug. But the front camera doesn't work for my xt1799-2.
_________________________________
LineageOS 16.0 v0.14
Changelog:
Fixed NFC on XT1793/4 (thanks to @CypherNoodle for helping me)
Fixed compass on XT1790/1
Fixed "There's a problem with your device." error (thanks to @wiktorek140)
Fixed MTP (thanks to @sohamlad7)
lineage-16.0-20200101-UNOFFICIAL-montana.zip
_________________________________
View attachment 5920677
View attachment 5920679
View attachment 5920671
'Seamless System updates' is not supported. It means that you can only download the 'A-only' file.
View attachment 5920673
View attachment 5920685
It says if the stock rom is under android 8 and below, and not support 'seamless system updates', we should download the 'A-only' GSI file.
If the stock rom is above android 9, no matter the ''seamless system updates' is supported or not, must download the 'AB' GSI file.
View attachment 5920687
Installing instruction. (It's different from the readme.txt file in the download website.)
1. flash twrp
2. In twrp steps:
Wipe: It just says double wipe, actually I don't exactly know what it means. They always said that in the Chinese instruction. I dislike that. Why they just can not say it in detail?!
But remember don't choose 'Vendor', otherwise you can't even see the moto bootlogo.
Install: tap 'Insall Image' - 'Select Storage' - choose the image file (upzip from the .7z file before.) - 'Select Partition to Flash Image' choose 'System Image'
After it finishes, double wipe again. (I think it means 'Wipe' - 'Format Data' and 'Advance Wipe' - 'Dalvik / ART Cache , Data , Cache', no need to choose 'System' this time.)
Method 2 is a fastboot method. Because I haven't used some softwares mentioned in the page. So I won't translate it for you.
You can search the other instructions on the website (My searching keywords are 'twrp flash GSI') and have a try. I failed to flash the ZUI GSI (fail to boot the system), maybe you can try the Xperia OS.
If you success, do you mind telling me the steps in detail, bro?
Update 20230528 19:00:
My steps above are right, I success in flashing the Xperia OS.
twrp steps:
1. Wipe - format data - yes
Advanced wipe - choose : Dalvik / Art Cache , Data, Cache , System
2. Install - Install Image - Choose the .img file upzip from the .7z file - 'Select Partition to Flash Image' choose 'System Image'
After it finishes, go back to 'Wipe'.
Wipe - format data - yes
Advanced wipe - choose : Dalvik / Art Cache , Data, Cache (No 'System' this time)
After a 5-10 minutes boot time, I'm now in Xperia OS. Base on XZ3.
But very buggy. Lots of bugs.
No navigation bar!!! I can only swipe down the quick setting center to enter the system settings. It only has a one button navigation bar setting, but the button doesn't appear.
Camera app crashes.
No sounds. 'Phone ringtone, notification sound, alarm sound' all are not contained in the system.
It's just a disaster.
The animation of the 'Picture' app is very interesting.
Volte works for my xt1799-2.
View attachment 5920745
View attachment 5920747
View attachment 5920749
View attachment 5920751
View attachment 5920753
View attachment 5920755
ZUI-Aonly-9-20190617-ErfanGSI.img.7z
ZUI-Aonly-9-20190617 is installed successfully.
But front camera doesn't work for my xt1799-2.
Network doesn't work.
if it was that easy jarlpenguin wouldn't build lineageos for this phone
here you goHi, bro, I forgot to ask your g5s version? Yours is xt179*?
Does your front camera work in the last build of lineageos 16.0 , the one without copy bug. But I have boot error, you remember that?
lineage-16.0-20200918-UNOFFICIAL-montana.zip
https://github.com/moto-msm89xx/rel.../lineage-16.0-20200918-UNOFFICIAL-montana.zip
If you flash it again in the future, can you make a whole backup of all partitions? I try to restore them to my device to see if it still has a boot error.
backup.zip
drive.google.com
I think i can make lineage 17 backup work on your phone if you use fastboot instruction
but I have to test on my phone first
I'll do it later.
yeah, fastboot instruction is not going to work since vendor partition is not found and userdata can't bypass encryption.here you go
backup.zip
I think i can make lineage 17 backup work on your phone if you use fastboot instruction
but I have to test on my phone first
I'll do it later.
but if you flash latest lineage 17 from github and delete /vendor/bin/swapon through twrp it will be exactly same steps I did before i uploaded the backup.
Doesn't work on lineage 16 and lower because it uses toybox instead of /vendor/bin/
Last edited:
I did a battery test of lineageos-16.0-20200101.
I inserted the sim card in it on 2023-06-23 . So there is a 'mobile network standby'.
Although it's not as good as the moto stock oreo 8.1.0, it's a lot better than lineageos 18.1.
No copy bug. Only front camera doesn't work for my xt1799-2.
____________________
moto stock oreo 8.1.0:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
23
Code:#include <std_disclaimer.h> /* * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. * */
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Instructions:
- Download the latest build, official TWRP (3.4.0 and newer) and GApps (if you need them)
- Flash the downloaded TWRP via fastboot
- Boot to recovery
- Format system, vendor, data, cache, and dalvik cache
- Reboot to recovery
- Flash the latest build
- Reboot to recovery
- Flash GApps and any other necessary add-ons
Note: Long first boot times are normal due to forced encryption. Please do not reboot your device when it is booting up the first time, instead wait patiently. If it takes more than 10 minutes to boot then please notify me here with a logcat.
What's working:
- WiFi
- Camera and Camcorder
- Bluetooth
- NFC
- Fingerprint - Oreo firmware required
- GPS
- OTG
- Video Playback
- Audio
- RIL
- VoLTE/VoWiFi
- USB tethering/audio
- SELinux: Enforcing
Known issues:
- You tell me
Downloads:
- Unofficial builds: GitHub
- Recovery: Official TWRP
- Google Apps: OpenGApps (nano package is advisable, but you definitely should avoid using stock/super packages)
Reporting Bugs
- All bugs should be reported here: Issue Tracker
- DO NOT Report bugs if you're running a custom kernel or you installed Xposed
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
- If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
- If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Code:What is your-- LineageOS version: LineageOS Download url: Gapps version: Did you-- wipe: restore with titanium backup: reboot after having the issue: Are you using-- a task killer: a non-stock kernel: other modifications: Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Thanks to:
@GivFNZ for testing my builds
@wiktorek140, @karthick mostwanted, @wh0dat, @KalilDev, @AsD Monio, @GoldeneyeS2, @Steve Mathew Joy and @rajatgupta1998 for their hard work on our device sources
LineageOS team
Changelogs:
Source code:
- Common device tree: https://github.com/JarlPenguin/android_device_motorola_msm8937-common-1
- Device tree: https://github.com/JarlPenguin/android_device_motorola_montana
- Kernel: https://github.com/HyperTeam/android_kernel_motorola_msm8937
XDA:DevDB Information
LineageOS 16.0 for Moto G5S, ROM for the Moto G5S
Contributors
JarlPenguin, AsD Monio, wiktorek140, GivFNZ, karthick mostwanted, wh0dat, rajatgupta1998
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo
Based On: CyanogenMod/AOSP
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2020-08-24
Current Beta Version: 1.0b3
Beta Release Date: 2019-03-15
Created 2019-03-15
Last Updated 2020-09-1811Hello,
New LineageOS 16.0 build avaiable here (https://sourceforge.net/projects/mo...16.0-20200502-UNOFFICIAL-montana.zip/download)
CHANGELOG:
- default kernel included (radium compatibility)
- fixed error in AudioFX
- April security patches
- Minor tweaks
- fixed "Internal error" on eva kernel
INSTALLATION:
- Make a backup
- flash rom zip via recovery
- Optional instalation step
- install additional mods (magisk, gapps, audio mod etc.)
- reboot to system
WARNING! First boot may take ~10 min!
ADDITIONALS:
- Prebuilded ProjektEva kernel here (https://sourceforge.net/projects/montana/files/3.18/ProjektEva/boot-projekteva-20200503.img/download - !!!MAGISK PREFLASHED!!!)
Optional instalation step:
- Install boot-projektEva-2020-05-02.img as image into BOOT partition9If anyone is wondering what happened, I've been really busy these past few weeks, so that is why no updates have been launched.
On the other hand, sneak peek into next update:
Fixed video recording in Snap, Moto Camera, etc. (Partly thanks to @AsD Monio)
Project Treble (Team effort of me and @AsD Monio)
Fixed time resetting on reboot
Updated lots of blobs
And more77Hello, everyone! I have good news! Wi-Fi is FIXED! Thanks a lot to @wiktorek140 (for reading & helping me with logs) and @GiovaniFNZ (for testing all of my builds) on Telegram. Now all that is left is fixing Moto Actions, which is pretty much a piece of cake.
