[ROM][UNOFFICIAL][P][F500,LS991,H81x,US991,VS986] LineageOS 16.0

[beingmishra]

Quick questions here :
1. Did anyone tried this rom on F500?
2. @steadfasterX can u share the DT u used for f500? ... I'll modify one if needed but if u have then it will be more cool.....

 

[Frazercrib]

H811 clean flash on jun 20 build
When I make phone calls, I can't hear anything from the person I called
I only hear them when I place the call on speaker

 

[steadfasterX]

Is regular calling supposed to work in the latest build (2019-06-20) of lineage 16 for VS986 on VZW network?

no. the progress of that particular issue is tracked here: https://github.com/Suicide-Squirrel/issues_oreo/issues/21

Quick questions here :
1. Did anyone tried this rom on F500?
2. @steadfasterX can u share the DT u used for f500? ... I'll modify one if needed but if u have then it will be more cool.....

reg. 1 no idea but will work
there is no dedicated f500 release so you simply flash the h815 UsU one on your f500 and it will work as it should.
if you like you can fork the h815 UsU DT from here: https://github.com/Suicide-Squirrel/android_device_lge_h815-Usu and replace all findings (except those going to the blobs) with f500 and rename the whole repo to f500 as well.
if you finished let me know and I will fork yours to the suicide org and can do f500 builds in the future, too.
its easy to do the above but I was too lazy yet (and it seems there are just a few - if any - f500 users)

H811 clean flash on jun 20 build
When I make phone calls, I can't hear anything from the person I called
I only hear them when I place the call on speaker

do you talk about BT voice? or the normal handset?
if BT voice wait for the next build (arrives today)
if handset take a log (read the FAQ #1


.-

 

[beingmishra]

reg. 1 no idea but will work
there is no dedicated f500 release so you simply flash the h815 UsU one on your f500 and it will work as it should.
if you like you can fork the h815 UsU DT from here: https://github.com/Suicide-Squirrel/android_device_lge_h815-Usu and replace all findings (except those going to the blobs) with f500 and rename the whole repo to f500 as well.
if you finished let me know and I will fork yours to the suicide org and can do f500 builds in the future, too.
its easy to do the above but I was too lazy yet (and it seems there are just a few - if any - f500 users)
.-

Yeah can see that ... only found 1... I will do as soon as I get my hands on my lg g4....

 

[steadfasterX]

Let me say how to grab the log. If I am wrong Please correct me.
First I have to open Fwul on my pc
Second i have to open usb debugging and root access for adb.
Third i don't know that to do but I think i have to open terminal on fwul?
Then the commands (adb root. And adb shell)
After that to grab the log i have to write adb pull /sdcard/Download/logcat.txt right?

I am New on adb things...

And also Should I grab the log after restart the phone ( it fixes camera freezing) or when it freeze

Edit: I found a issue too. If we use different launcher than trebutchet sometimes system ui locked and restart. And sometimes power button doesn't wake up
Edit 2: Now I tested my camera. I recorded video and waited to freeze. After 18 minutes it got freeze. @steadfasterX time always changing
Edit 3: I did oneshot logcat here it is: https://paste.omnirom.org/view/0ef86752

Looks like the temperature is going too high. makes sense as the G4 is known to overheat and even more known to the ILAPO. So it would be possible to adjust the thermal engine with the risk of burning the device..

.-

 

[steadfasterX]

New builds are cooking...

In progress (in that order):

• H815 UsU
• VS986
• H812
• H810

Done:

• H815
• H811

Noteworthy Changes:

• BT voice fix optimizations by z3DD3r
  Keep in mind that even when I have done some tests it might have unknown side effects or behave not in every situation as expected as I cannot test everything ...
  so always keep a recent backup of your important data !
  
  
• BT WBS (wide band speech) is now disabled.
  Why? If you have a device which supports WBS the BT voice fix failed. Disabling WBS is a workaround only, ofc but it is not that a big disadvantage so nothing you need to worry about - usually.
  

When coming from lineage-16.0-20190620 or later a "REGULAR CLEAN FLASH" is recommended
When coming from before lineage-16.0-20190620 or later a "REGULAR CLEAN FLASH" is REQUIRED

See the FAQ of this thread how to do a "regular clean flash": https://forum.xda-developers.com/g4/development/rom-lineageos-16-0-t3929082/post79502871

If you wanna show your gratitude give those guys at least all your 8 thanks clicks (open the post I linked and click on every post you can find there from those guys):

z3DD3r (does not accept donations):
https://forum.xda-developers.com/go...t-calling-robotic-audio-t3798105/post79747463

Sashko98 (accepts donations as well):
https://forum.xda-developers.com/go...t-calling-robotic-audio-t3798105/post79749418


.-

 

[MrVoidex]

Looks like the temperature is going too high. makes sense as the G4 is known to overheat and even more known to the ILAPO. So it would be possible to adjust the thermal engine with the risk of burning the device..

.-

Soo there is no solving for it :/ @steadfasterX in RR Oreo rom there isn't problem like this.

 

[steadfasterX]

Soo there is no solving for it :/ @steadfasterX in RR Oreo rom there isn't problem like this.

Correct that's because you do not have overheating protection within that ROM .

if you like you can change the thermal configuration file and then at your own risk hope that you will not burn your device


Sent from my OnePlus 6T using XDA Labs

 

[MrVoidex]

Correct that's because you do not have overheating protection within that ROM .

if you like you can change the thermal configuration file and then at your own risk hope that you will not burn your device


Sent from my OnePlus 6T using XDA Labs

I found that my cell is coming late so I have to wait for it. If I don't system UI has stopping and I can't do anything. I flashed H815_20p Modem. And Also I figured out that when I use different launcher again system UI locking. But in Magisk There is QuickSwitch Module so I installed it and installed compatible launcher for it. Now everything is fine. Thank you @steadfasterX

 

[himtan]

I went to lineage 16 from lineage 15.1. Seems very smooth.
I noticed that the maximum call volume is a little lower than lineage 15.1. Can you please increase the maximum possible volume on calls in the upcoming version of lineage 16 ?

Thanks in advance.

 

[Vishnuisgod]

Hello guys,
Ive been struggling with my G4 overheating when using the camera extensively. Im wondering if theres a ROM that doesnt cause as much heat in the cpu/camera area? Ive recorded (with cpuz) temps as high as 90C..... Its melted one of my phones, with unrecoverable data . Looking for a cooler running rom if theres such a thing.

 

[ANDROID2468]

Hello guys,
Ive been struggling with my G4 overheating when using the camera extensively. Im wondering if theres a ROM that doesnt cause as much heat in the cpu/camera area? Ive recorded (with cpuz) temps as high as 90C..... Its melted one of my phones, with unrecoverable data . Looking for a cooler running rom if theres such a thing.

No, there are no roms that don't have this issue. Even the stock rom has this issue. You can try underclocking the CPU and/or disabling 2 of the 6 CPU cores, but your phone will still get a little Warm.

 

[Vishnuisgod]

No, there are no roms that don't have this issue. Even the stock rom has this issue. You can try underclocking the CPU and/or disabling 2 of the 6 CPU cores, but your phone will still get a little Warm.

hmmmmm, turning off a few cores.... that sounds promising. Is there a guide for that somewhere?

 

[ANDROID2468]

hmmmmm, turning off a few cores.... that sounds promising. Is there a guide for that somewhere?

You can use this guide by steadfasterX here.
I heard People also use kernel adiutor to do it but I haven't gotten it to work.

 

[zeduck]

@steadfasterX thanks for the build with bluetooth fix!

Since LOS 16 you includes microG and G-droid to your build.
Would it be possible to include signature spoofing as well?
Otherwise, would it be possible to have a pure LOS build, please?

I have quite a difficult setup to maintain as I use signature spoofing to enable GMS services and I use FakeGapps stub.
MicroG embedded is not much simplier in my case.


Thanks again for the huge work you did for our device!

 

[steadfasterX]

Since LOS 16 you includes microG and G-droid to your build.
Would it be possible to include signature spoofing as well?
!

I guess you meant F-Droid
If you explain what you mean with signature spoofing .. maybe.


Sent from my OnePlus 6T using XDA Labs

 

[zeduck]

It's a requirement to MicroG GSM Core.
That is the collection of stubs to replace Google Services, as you probably already know.

Here are some pointers:

* https://github.com/microg/android_packages_apps_GmsCore/wiki/Signature-Spoofing

* https://review.lineageos.org/c/LineageOS/android_frameworks_base/+/195284/

 

[polfrank]

Hey, I think that I have found a small issue with BT.

Let's assume that we are doing a call with the BT headset and afterwards we end it. The dialer app or the data-dialing app (WhatsApp/Viber/etc) remain in the background, as expected.
If we try afterwards to play music with a music app (eg. Spotify), the music cannot be heard. But if you open the recent apps and swipe the dialing app from before to close it,the music continues automatically.
It's like the dialing app is "not giving back the sound" to other apps after the call.

I created a log by doing these steps:
1. Doing a call with Viber.
2. Ending the call.
3. Open Spotify to play music. The time of the song is starting, but cannot hear anything.
4. Open recent apps to close Viber.
5. Music from Spotify continues automatically.

https://paste.omnirom.org/view/2e5cf106

note: the same is happening when I use the default music app instead of Spotify.

 

[steadfasterX]

Hey, I think that I have found a small issue with BT.

Let's assume that we are doing a call with the BT headset and afterwards we end it. The dialer app or the data-dialing app (WhatsApp/Viber/etc) remain in the background, as expected.
If we try afterwards to play music with a music app (eg. Spotify), the music cannot be heard. But if you open the recent apps and swipe the dialing app from before to close it,the music continues automatically.
It's like the dialing app is "not giving back the sound" to other apps after the call.

I created a log by doing these steps:
1. Doing a call with Viber.
2. Ending the call.
3. Open Spotify to play music. The time of the song is starting, but cannot hear anything.
4. Open recent apps to close Viber.
5. Music from Spotify continues automatically.

https://paste.omnirom.org/view/2e5cf106

note: the same is happening when I use the default music app instead of Spotify.

Thx for your report . Will look into it ..

looks like that is causing the issue:

06-30 21:22:19.338 16424 16469 E bt_btif : register_notification_rsp: Avrcp device is not connected, handle: 0x0

Sent from my OnePlus 6T using XDA Labs

 

[TheCappn]

You are the only one requesting it. so no sorry. read on:



https://forum.xda-developers.com/showpost.php?p=75817533&postcount=2

--> FAQ #12



https://forum.xda-developers.com/showpost.php?p=74811095&postcount=2

--> FAQ #15



.-

I'd also like a us991 version of the ROM, myself. I'm not asking you to make a special one. But if I flash a h811 as my gpt compatibility said. Will I lose my cell service?

And, if so, would flashing the modem.bin file work to fix it, like it did when I UsU'd in the first place?
If not, could you put me on the right path to 'porting' for us cellular cell service to work? I've built roms myself in the past, but they were already for my device. So I don't have any experience with carrier specific issues.

Sent from my LGUS991 using Tapatalk