Development [ROM][UNOFFICIAL][pdx215][13] Pixel Experience Plus

Search This thread

Sakuu

Senior Member
TMruzAQ.png

PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

Unofficial Pixel Experience Plus

Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

Notes


1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)
2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher

Support group available on Telegram!


What works?​

• Wi-Fi
• Wi-Fi 6e
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED
• Flashlight
• Fingerprint Sensor
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• Dolby Atmos
• 360 Reality Audio Lite
• Creator Mode
• HDR10+
• 120Hz
• 240Hz Touch Sampling

What's broken?​

• You tell me

Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the links below)​

Clean Flash:​

Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery
Factory Reset > Format data/factory reset
Apply update > Apply update from ADB
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
BUT If you want to flash Magisk go to
Advanced > Reboot to bootloader
Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot

Updating from a older build (Dirty Flash):​

Code:
adb reboot bootloader
fastboot reboot recovery
Apply update > Apply update from ADB
Code:
adb sideload <rom.zip>
Back Arrow > Reboot system now
If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk

Post-Install:​

For the Camera button I suggest Installing Key Mapper and then configuring it as in this and this picture. (Screen off button detection is only available for rooted users)

Downloads:
Folder Download

Sources:
Pixel Experience Source
Device Tree
Kernel Source

Build Author | Maintainer
Saku

Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.233

Version Information
Status: Stable
Pixel Experience Plus Version: 13
SELinux Status: Enforcing
Release Date: 25/05/2023
Last Updated: 25/05/2023
 
Last edited:
  • Like
Reactions: nos1609 and steso90

DrDrag0n

Senior Member
Jan 12, 2018
51
22
TMruzAQ.png

PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

Unofficial Pixel Experience Plus

Code:
/* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

Notes


1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)
2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher

Support group available on Telegram!


What works?​

• Wi-Fi
• Wi-Fi 6e
• Mobile Data
• Bluetooth
• SDCard
• Cameras
• GPS
• LED
• Flashlight
• Fingerprint Sensor
• Battery Health Statistics
• Pause Charging
• Battery Care
• Sound
• Vibration
• Dolby Atmos
• 360 Reality Audio Lite
• Creator Mode
• HDR10+
• 120Hz
• 240Hz Touch Sampling

What's broken?​

• You tell me

Flashing Instructions
(Download both the ROM, boot & vendor_boot images from the links below)​

Clean Flash:​

Code:
adb reboot bootloader
fastboot --set-active=a
fastboot flash boot_a [boot image]
fastboot flash vendor_boot [vendor_boot image]
fastboot reboot recovery


Code:
adb sideload <rom.zip>

BUT If you want to flash Magisk go to

Code:
fastboot flash boot_a [magisk boot image]
fastboot flash boot_b [magisk boot image]
fastboot reboot

Updating from a older build (Dirty Flash):​

Code:
adb reboot bootloader
fastboot reboot recovery

Code:
adb sideload <rom.zip>

If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk

Downloads:
Folder Download

Sources:
Pixel Experience Source
Device Tree
Kernel Source

Build Author | Maintainer
Saku

Build Information
Device: Xperia 1 III (pdx215)
Build Type: Unofficial
Android Version: 13
Kernel Version: 5.4.233

Version Information
Status: Stable
Pixel Experience Plus Version: 13
SELinux Status: Enforcing
Release Date: 25/05/2023
Last Updated: 25/05/2023
You are relentless! When are you going to choose one rom to perfect?
 

Mills00013

Senior Member
Oct 12, 2007
586
131
I can also give the LDAC fix a try. I have two different headsets that support it. Been running PE since yesterday and it's glorious otherwise.

I don't know if it was a one time glitch for me or what, but after flashing, the phone would not recognize the modems, both SIM slots failed to show even their IMEI numbers and wouldn't provision my phone on Fi. Going back to stock and then reflashing again fixed that right up though, so I don't think it was the ROM. Just sharing in case anyone else sees the same though.
 

Sakuu

Senior Member
I can also give the LDAC fix a try. I have two different headsets that support it. Been running PE since yesterday and it's glorious otherwise.

I don't know if it was a one time glitch for me or what, but after flashing, the phone would not recognize the modems, both SIM slots failed to show even their IMEI numbers and wouldn't provision my phone on Fi. Going back to stock and then reflashing again fixed that right up though, so I don't think it was the ROM. Just sharing in case anyone else sees the same though.
weird, what model do you have? all models (except weird JP models which even bbn hasn't added support for) should work
 

Mills00013

Senior Member
Oct 12, 2007
586
131
weird, what model do you have? all models (except weird JP models which even bbn hasn't added support for) should work
It was really weird, I'm on the US XQ-BC62 model. I'm not at all convinced it was the build, but it was a very strange bug indeed. There was some other stuff that I think might have gotten messed up in the flashing process because after I started attempting to reflash, I started getting a corrupted software notice, even with the unlocked bootloader. Had to relock and use the Companion software to recover. But it's truly working amazing now.

Out of curiosity, is it possible in any way that you know of to retain the functionality of the camera button opening the Photo Pro camera app? It still works as a shutter inside the app, but it also used to be a shortcut to open it directly from the stock build.
 

Sakuu

Senior Member
It was really weird, I'm on the US XQ-BC62 model. I'm not at all convinced it was the build, but it was a very strange bug indeed. There was some other stuff that I think might have gotten messed up in the flashing process because after I started attempting to reflash, I started getting a corrupted software notice, even with the unlocked bootloader. Had to relock and use the Companion software to recover. But it's truly working amazing now.

Out of curiosity, is it possible in any way that you know of to retain the functionality of the camera button opening the Photo Pro camera app? It still works as a shutter inside the app, but it also used to be a shortcut to open it directly from the stock build.
corrupted software notice
That's not good, AT ALL... you should flash stock and go back (after i finish this build) also someone else on BC62 tested and modem worked flawlessly (even better than stock most of the time)
is it possible in any way that you know of to retain the functionality of the camera button opening the Photo Pro camera app\
Well there's a tutorial for it in the rising post, and i recommend it over the default method in some roms since you can basically replicate stock behaviour 1:1 with vibration too. I will edit the original post
 

Sakuu

Senior Member
I can also give the LDAC fix a try. I have two different headsets that support it. Been running PE since yesterday and it's glorious otherwise.

I don't know if it was a one time glitch for me or what, but after flashing, the phone would not recognize the modems, both SIM slots failed to show even their IMEI numbers and wouldn't provision my phone on Fi. Going back to stock and then reflashing again fixed that right up though, so I don't think it was the ROM. Just sharing in case anyone else sees the same though.
https://gofile.io/d/GhxDP3 Here you go, you can use the same boot and vendor_boot from onedrive since i haven't done any changes on that side, please report back if LDAC is fixed now.
 

Mills00013

Senior Member
Oct 12, 2007
586
131
https://gofile.io/d/GhxDP3 Here you go, you can use the same boot and vendor_boot from onedrive since i haven't done any changes on that side, please report back if LDAC is fixed now.

It's closer! Previously there was a problem even getting the headphones to connect. Bluetooth would discover them and connect, but then say there was a problem with the connection and to power the device on and off. Doing so didn't change the behavior.

After this new build though, that message no longer appears. There's no errors that I can see easily (although I haven't dug into logcat or anything yet.) However, there is no audio coming through even though it says LDAC is connected. This is both in the Bluetooth menu and the Sony Headphones app for these XM3s I'm testing with. I don't have any issue with Bluetooth audio in the car using AAC or other codecs that I've tried... so far anyway.

I'm on the road for pretty much the rest of the day, but can try things here and there. Left my computer at home but I can flash additional builds tomorrow if you have any other ideas.
 

Mills00013

Senior Member
Oct 12, 2007
586
131
Please post screenshots to how it looks like and what we can get 🤗
It looks just like a Pixel in pretty much every way. And this build even identifies as one to applications that care. It's just a much more beautiful screen and better resolution ☺️

But here's some screenshots anyway. Color scheme is using Material You so it's automatic, and I've changed the grid layout to be five wide instead of the default four, but that's it for customization.
 

Attachments

  • Screenshot_20230526-150652_Pixel Launcher.png
    Screenshot_20230526-150652_Pixel Launcher.png
    3.3 MB · Views: 59
  • Screenshot_20230526-150655_Pixel Launcher.png
    Screenshot_20230526-150655_Pixel Launcher.png
    418.8 KB · Views: 64
  • Screenshot_20230526-150719_Settings.png
    Screenshot_20230526-150719_Settings.png
    190.3 KB · Views: 56
  • Screenshot_20230526-150647_Pixel Launcher.png
    Screenshot_20230526-150647_Pixel Launcher.png
    3.1 MB · Views: 68
  • Like
Reactions: Pandemic

Sakuu

Senior Member
It's closer! Previously there was a problem even getting the headphones to connect. Bluetooth would discover them and connect, but then say there was a problem with the connection and to power the device on and off. Doing so didn't change the behavior.

After this new build though, that message no longer appears. There's no errors that I can see easily (although I haven't dug into logcat or anything yet.) However, there is no audio coming through even though it says LDAC is connected. This is both in the Bluetooth menu and the Sony Headphones app for these XM3s I'm testing with. I don't have any issue with Bluetooth audio in the car using AAC or other codecs that I've tried... so far anyway.

I'm on the road for pretty much the rest of the day, but can try things here and there. Left my computer at home but I can flash additional builds tomorrow if you have any other ideas.
Can you send a matlog, also did you clean or dirty flash from the other build?
 

Sakuu

Senior Member
It looks just like a Pixel in pretty much every way. And this build even identifies as one to applications that care. It's just a much more beautiful screen and better resolution ☺️

But here's some screenshots anyway. Color scheme is using Material You so it's automatic, and I've changed the grid layout to be five wide instead of the default four, but that's it for customization.
https://gofile.io/d/jjwGSZ here's another build, please tell me if LDAC works or not now.
 

IHYG

New member
Apr 4, 2020
1
0
The AOD(Alawys On Display) default brightness was very high,it should be lower I think.
 

Mills00013

Senior Member
Oct 12, 2007
586
131
https://gofile.io/d/jjwGSZ here's another build, please tell me if LDAC works or not now.

The second build doesn't seem to make a difference, but I'm not able to test with a clean flash right now, only dirty. I also can't get matlog installed, but here's a logcat filtered to warnings and above. This is with headphones connected properly, no errors displayed in the interface, but no audio when trying to playback in Youtube Music.

Looks like the problem is spewed out in this repeating line, although I can't find direct correlation to anything else:

Less:
05-27 11:12:38.649   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error

Let me know if I can pull other logs or do a specific test.

Less:
05-27 11:12:38.380  4749  4749 W YouTubeMusic: Missing Vss3Config
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:38.428  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:38.450 17773 17838 W bt_stack: [WARNING:device.cc(1452)] Device is not registered for play position updates
05-27 11:12:38.453   965  1012 E audio_hw_primary: route_output_stream: A2DP profile is not ready,ignoring routing request
05-27 11:12:38.467   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.514   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.558   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.605   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.608  4269  4941 W AiAiEcho: SmartspaceNotificationPredictor no parser can handle this notification or notification is invalid
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:38.630  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:38.649   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.694   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.739   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.747  2362  2384 W System  : A resource failed to call release.
05-27 11:12:38.786   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.820  4269  4941 W AiAiEcho: SmartspaceNotificationPredictor no parser can handle this notification or notification is invalid
05-27 11:12:38.831   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:38.852  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:38.875   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.922   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:38.969   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.015   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.062   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.108   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.155   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.202   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.248   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.292   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.339   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.386   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.433   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.479   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.525   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.570   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.616   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.663   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.711   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.758   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.804   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.849   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.894   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.940   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:39.987   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.033   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.081   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.127   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.174   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.219   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.266   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.313   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.360   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.406   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.454   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.500   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.547   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.593   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.640   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.686   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.733   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.780   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.828   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.874   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.922   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:40.968   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.014   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.062   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.073  4269  4941 W AiAiEcho: SmartspaceNotificationPredictor no parser can handle this notification or notification is invalid
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:41.075  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:41.078 17773 17838 W bt_stack: [WARNING:device.cc(1452)] Device is not registered for play position updates
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:41.115  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:41.128   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.195   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.262   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.276  4269  4941 W AiAiEcho: SmartspaceNotificationPredictor no parser can handle this notification or notification is invalid
05-27 11:12:41.277  4269  4941 W AiAiEcho: SmartspaceNotificationPredictor no parser can handle this notification or notification is invalid
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:41.297  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:41.298  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:41.298  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:41.298  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:41.298  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:41.311  2362  2362 W ConstraintSet: id unknown center_vertical_guideline
05-27 11:12:41.311  2362  2362 W ConstraintSet: id unknown action_button_guideline
05-27 11:12:41.311  2362  2362 W ConstraintSet: id unknown icon
05-27 11:12:41.311  2362  2362 W ConstraintSet: id unknown media_seamless
05-27 11:12:41.311  2362  2362 W ConstraintSet: id unknown media_action_barrier_start
05-27 11:12:41.311  2362  2362 W ConstraintSet: id unknown media_action_barrier_end
05-27 11:12:41.312  2362  2362 W ConstraintSet: id unknown media_action_barrier_top
05-27 11:12:41.312  2362  2362 W ConstraintSet: id unknown remove_text
05-27 11:12:41.312  2362  2362 W ConstraintSet: id unknown settings
05-27 11:12:41.312  2362  2362 W ConstraintSet: id unknown dismiss
05-27 11:12:41.312  2362  2362 W ConstraintSet: id unknown cancel
05-27 11:12:41.317   965  1013 E DlbDap2Process: Mix matrix is not correct
05-27 11:12:41.317   965  1013 W DlbDap2Process: updateOutputMode: no mix matrix for output mode 10, use the default one
05-27 11:12:41.331   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.392   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.453   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.515   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.576   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.637   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.699   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.760   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.821   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.882   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:41.938  3165 18737 W enmu    : [{0}] Failed to resolve name. status={1}
05-27 11:12:41.943   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.005   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.066   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.127   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.189   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.250   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.311   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.373   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.434   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.495   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.556   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.618   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.680   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.741   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.802   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.863   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.926   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:42.987   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.048   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.109   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.171   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.232   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.293   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.355   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.416   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.477   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.538   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.600   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.661   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.723   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.784   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.846   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.907   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:43.969   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
05-27 11:12:44.031   965 14835 E audio_hw_primary: start_output_stream: A2DP profile is not ready, return error
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    TMruzAQ.png

    PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Unofficial Pixel Experience Plus

    Code:
    /* Your warranty is... still valid?
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    Notes


    1. You need to flash Stock Android 13 before flashing this ROM (61.2.X.X.XXX)
    2. If you came from a SODP based ROM, you need to go back to official Android 13 firmware, and boot until you get to the Xperia Launcher

    Support group available on Telegram!


    What works?​

    • Wi-Fi
    • Wi-Fi 6e
    • Mobile Data
    • Bluetooth
    • SDCard
    • Cameras
    • GPS
    • LED
    • Flashlight
    • Fingerprint Sensor
    • Battery Health Statistics
    • Pause Charging
    • Battery Care
    • Sound
    • Vibration
    • Dolby Atmos
    • 360 Reality Audio Lite
    • Creator Mode
    • HDR10+
    • 120Hz
    • 240Hz Touch Sampling

    What's broken?​

    • You tell me

    Flashing Instructions
    (Download both the ROM, boot & vendor_boot images from the links below)​

    Clean Flash:​

    Code:
    adb reboot bootloader
    fastboot --set-active=a
    fastboot flash boot_a [boot image]
    fastboot flash vendor_boot [vendor_boot image]
    fastboot reboot recovery
    Factory Reset > Format data/factory reset
    Apply update > Apply update from ADB
    Code:
    adb sideload <rom.zip>
    Back Arrow > Reboot system now
    BUT If you want to flash Magisk go to
    Advanced > Reboot to bootloader
    Code:
    fastboot flash boot_a [magisk boot image]
    fastboot flash boot_b [magisk boot image]
    fastboot reboot

    Updating from a older build (Dirty Flash):​

    Code:
    adb reboot bootloader
    fastboot reboot recovery
    Apply update > Apply update from ADB
    Code:
    adb sideload <rom.zip>
    Back Arrow > Reboot system now
    If you've had Magisk flashed before you need to reflash it again, go to the steps below the Clean Flash and do the same again, then reboot and you should still have Magisk

    Post-Install:​

    For the Camera button I suggest Installing Key Mapper and then configuring it as in this and this picture. (Screen off button detection is only available for rooted users)

    Downloads:
    Folder Download

    Sources:
    Pixel Experience Source
    Device Tree
    Kernel Source

    Build Author | Maintainer
    Saku

    Build Information
    Device: Xperia 1 III (pdx215)
    Build Type: Unofficial
    Android Version: 13
    Kernel Version: 5.4.233

    Version Information
    Status: Stable
    Pixel Experience Plus Version: 13
    SELinux Status: Enforcing
    Release Date: 25/05/2023
    Last Updated: 25/05/2023
    1
    I have wait someone compile a pe for a long time,and I spend two weeks to make one,then there you are and I waste two weeks :(
    1
    I have wait someone compile a pe for a long time,and I spend two weeks to make one,then there you are and I waste two weeks :(
    lol just join and add commits and code and stuff...or Make yours use dark mode by default but make it Amoled black including the boot animation...
    1
    Please post screenshots to how it looks like and what we can get 🤗
    It looks just like a Pixel in pretty much every way. And this build even identifies as one to applications that care. It's just a much more beautiful screen and better resolution ☺️

    But here's some screenshots anyway. Color scheme is using Material You so it's automatic, and I've changed the grid layout to be five wide instead of the default four, but that's it for customization.
    1
    Okay. Thank you for replying!
    Now you have to crowdfund for him to get one lol...