Development [ROM][Unofficial][pdx225][13] Lineage 20 For SONY XPERIA 10IV

Fast Charging or HS and Battery control (charging is capped to 2w)

  • Fast Charge

    Votes: 0 0.0%

  • Total voters
    2
  • Poll closed .
Search This thread

Georgz21

Member
Mar 20, 2023
11
1
Might be because 10 IV doesn't have a cirrus amp while flagships have it.

Oh, yeah that make sense! By the way the loudspeaker is awful! Cmon Sony isnt expensive a little better speaker for that price! But overall i like that phone and i think has the potential to be even better at the future!
 

King081

Senior Member
Oh, yeah that make sense! By the way the loudspeaker is awful! Cmon Sony isnt expensive a little better speaker for that price! But overall i like that phone and i think has the potential to be even better at the future!
speakers are fine they just needed to be tuned, which sony didnt do, currently thats not a priority and fixing the other 2 bugs are a priority
 
  • Like
Reactions: Georgz21

Georgz21

Member
Mar 20, 2023
11
1
Loudspeaker runs in mono btw, they just didn't bother to enable stereo. :LOL:
Indeed!! But i think the upper speaker isnt the same with the bottom one (in terms of hardware), i dont know if we can use them as stereo even if they're different. That will be great!
 
Last edited:

Georgz21

Member
Mar 20, 2023
11
1
Does anybody knows if that device has functionality for Radio Fm? Is it something we can enable with custom rom? Because with stock unfortunately we don't have. I tried to research about this in google without success.
 

sonykc

New member
Apr 4, 2023
3
1
Sony Xperia 10 IV
Good afternoon, can you tell me if the lineage firmware for our device is still in development? Who is already testing this firmware, is it possible to use it in everyday life?
 

bam80

Senior Member
Sep 26, 2010
248
23
Moscow
Hello, I'm about to buy this device, but need to make sure I'll be able to use it with alternative (LOS preferable) firmware.
King081 can you estimate if the 2 major bugs left will be eventually solved (in the near future), or it's still not clear?
 
  • Like
Reactions: sonykc

bam80

Senior Member
Sep 26, 2010
248
23
Moscow
They will be solved but busy with uni
Thanks.
The other my concern is the low camera rating here:

Can someone comment on that?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    when I flash vendor_boot after flash dtbo, I got a error:

    fastboot flash vendor_boot vendor_boot.img

    output:

    Sending 'vendor_boot' (98304 KB) OKAY [ 2.283s]
    Writing 'vendor_boot' FAILED (remote: 'Flashing is not allowed for partition')
    fastboot: error: Command failed

    my device is xq-cc72, and unlocked. Is there something wrong?


    update:
    I reboot in fastbootd mode then solved
    Flash in fastbootD
    1
    The Google Drive link in first post of this thread leads to address not found.
    The hyperlink doesn't work, but if you copy paste the text it does.

    I've also made a new build with MicroG: https://file.io/wDYEkQGMvPI0


    And found another bug. Color profiles don't work, which means that the Night Light feature also doesn't work.
  • 7
    2okPze5.png

    LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Basic requirements:

    • Unlock your bootloader, make sure you are on Android 13 firmware.
    • Make sure you can send and receive SMS and receive calls (also via WiFi and LTE, if possible). It would be better for you to get VoLTE/VoWiFi utilized once on stock to provision IMS
    • Currently tested on XQ-CC54 (If it does not work, please report below)
    • Make sure you have gone through the installation guide once before proceed!
    Installation:

    Extract the rom and the extract the payload and the continue with steps below (note usb does not work in recovery yet so transfer rom to sdcard)
    1. Flash additional partitions and recovery.
      • Download the following files from the download link:
        • dtbo.img
        • vendor_boot.img
        • boot.img
      • Connect your device to your PC via USB if isn't already
      • If your device is not already in fastboot mode, on the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:

        adb reboot bootloader
      • Flash the downloaded image files to your device by typing:

        fastboot flash dtbo <dtbo>.img
        fastboot flash vendor_boot <vendor_boot>.img
        fastboot flash boot <boot>.img
      • Now reboot into recovery to verify the installation:

        fastboot reboot recovery
    2. Installing LineageOS from recovery
      • Download the lineageos installation package that you would like to install from the download link
      • If you are not in recovery, reboot into recovery
      • Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
      • Return to the main menu
      • Sideload the LineageOS package
        • On the device, select "Apply Update", then "Apply from sd card" to begin flashing rom
      • Return to the main menu
      • (Optionally) If you want to install any add-ons, click "Advanced", then "Reboot to Recovery", then when your device reboots, click "Apply Update", then "Apply from sdcard", then chosse your packages in.
    3. Once you have installed everything successfully, click the back arrow in the top left of the screen, then "Reboot system now"
    Downloads:
    https://drive.google.com/drive/folders/1tpg8SwQn3-kV4b-Ta_4yenLwQNHLWiyR?usp=sharing

    Device Trees & Kernel Source:

    Current Bugs:
    None

    Many thanks to:
    @clfbbn
    @loipuru
    @WindowsDev0
    @dylanneve1
    @Sakuu

    Special thanks to
    Sony
    @jerpelea

    For sending me the device
    4
    All Audio issues have been fixed, a new build will be uploaded some point later,
    Telegram support link has been fixed too, now you can join and get support
    3
    Just FYI I have not abandoned the device, I've just broke Audio in a whole new way and cam still doesn't work yet
    3
    New Build available

    Fixed some WIFI errors that were non stop spamming in logs
    Improved Memory Consumption
    GCam works now aswell
    Selinux is in permissive for now

    May need a CLEAN FLASH

    Download Link
    Google Drive

    GCam: install apk and apply tint fix
    Download
    2
    Good afternoon, can you tell me if the lineage firmware for our device is still in development? Who is already testing this firmware, is it possible to use it in everyday life?
    It has some bugs but it's still in development, have a look at bug list and decide whether you can daily it or not