[ROM][UNOFFICIAL] Resurrection Remix 7.0 [raphael][27-09-2019]

[The Marionette]

/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.

Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team, SlimRoms and of course to all the supporters.

1. Download the ROM and Gapps ( OpenGapps Pico package recommended)
2. Boot into recovery
3. Perform a factory reset
4. Flash the rom
5. Flash Google Apps
6. Reboot into the system

Resurrection Remix

Device Tree
Kernel

@DahakePL
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users​

Join the K20 Pro Telegram Group!​

XDA:DevDB Information
Resurrection Remix for Redmi K20 Pro, ROM for the Redmi K20 Pro

Contributors
The Marionette, abhishek987, UtsavTheGreat
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 10.3.16
Based On: LineageOS

Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2019-07-20

Created 2019-07-21
Last Updated 2019-09-28

 

[The Marionette]

BUG LIST

I can finally pull a "u tell me" .

 

[The Marionette]

Changelogs

21-08-2019
-fixed the FOD unlock issue

20-08-2019
- yeeted the GPU OC out
- switched to IMMENSITY kernel
- Latest FOD changes from LineageOS
- FOD location changed to match stock
- FOD scan color changed to match stock
- Fixed the FOD x voice call issue ( no more Sleep of Death after you get a call )
- New FOD icon
- Kernel upstreamed to v4.14.101
- Updated WLAN drivers from CAF ( LA.UM.7.1.r1-16000 )
- DT2W fully fixed ( finally )
- Fixed the “double call up” for the front camera ( in GCam )

04-08-2019
- added a new GPU max frequency ( 850 MHz )
- added new GPU low frequencies ( 0 and 180 )
- fixed video/audio playback
- increased the status bar height

03-08-2019
-using minimal IMMENSITY kernel
-deep sleep fixed
-status bar padding fixed
- RR upstream

31-07-2019
- RR upstream
- add padding to status bar items

25-07-2019
- RR upstream
- fix front camera

20-07-2019
- initial release

 

[Abaddon]

Thanks! Will try it out. I'm trying to figure out dt2w.

 

[omkar1997]

Great!! Will try once I unlock my bootloader

 

[IXTUS]

Thank you very much, I also use rr when using other devices. This is what I always looked forward to when I bought k20p.

 

[IXTUS]

As a report
I am based on the EU rom flash it and gapps，of course I cleaned up the data/system/cache But it has some problems. Fingerprints can be recorded but cannot be unlocked. The front camera does not work properly. When closes the screen, it cannot wake up and can only be restarted.

I will try again
Ok, when I don't flash the gapps, it is still.

 

[The Marionette]

As a report
I am based on the EU rom flash it and gapps，of course I cleaned up the data/system/cache But it has some problems. Fingerprints can be recorded but cannot be unlocked. The front camera does not work properly. When closes the screen, it cannot wake up and can only be restarted.

I will try again
Ok, Ok, when I don't flash the gapps, it is still.

Try flashing the Chinese stable build, not the Xiaomi.eu one.

 

[Abaddon]

Try flashing the Chinese stable build, not the Xiaomi.eu one.

Do you recommend only the China 9.6.27? I tried it multiple times but I can't get front camera working too. I can flash again and provide logs. Tried it with 9.7.11 Chinese as base too. Still no luck w front cam

 

[cykawg]

can not download. .have DT2W？

 

[iXanza]

can not download. .have DT2W？

You can read the second post

 

[The Marionette]

Do you recommend only the China 9.6.27? I tried it multiple times but I can't get front camera working too. I can flash again and provide logs. Tried it with 9.7.11 Chinese as base too. Still no luck w front cam

I found out my tester had used the 10.3.14 China Stable build before testing RR out. I updated the OP with the link to it, do try it out.

 

[Abaddon]

I found out my tester had used the 10.3.14 China Stable build before testing RR out. I updated the OP with the link to it, do try it out.

I tried ithe recommended firmware via recovery and fastboot. still no luck w front cam

clean flashed
tried it w and w/o magisk and gapps
tried it w encryption and without.

I attached logs for you to check :highfive:
hope it helps.

 

[ermacwins]

OP it might be worth have a look at LOS as fingerprint unlocking works on it.

 

[DiaboSenorita]

HI. I followed the instructions, flashing via twrp-3.3.1 the 10.3.14 given, RR, pico and wiping.
But the front camera still doesn't rise up.
And sometimes the screen turns a bit pink or purple for a split second when launching certain apps, Cast Box for example.

 

[cykawg]

You can read the second post

ok i saw it，does your front camera work normally?

 

[The Marionette]

New build up!

I synced the latest changes from RR and I tried fixing the camera.

In any case, since my bootloader is locked till next week, I'm still building blind here.
Therefore I need you guys to first make sure everything ( primarily the front camera and fingerprint sensor ) works for you on LOS, and only then try clean flashing the RR build along with gapps.
If everything mentioned works fine, please mention which MIUI version you were on before you flashed LOS and RR ( so I can update the OP and mention the proper MIUI version to use ).

Cheers.

 

[DiaboSenorita]

Front camera worked

New build up!

I synced the latest changes from RR and I tried fixing the camera.

In any case, since my bootloader is locked till next week, I'm still building blind here.
Therefore I need you guys to first make sure everything ( primarily the front camera and fingerprint sensor ) works for you on LOS, and only then try clean flashing the RR build along with gapps.
If everything mentioned works fine, please mention which MIUI version you were on before you flashed LOS and RR ( so I can update the OP and mention the proper MIUI version to use ).

Cheers.

Front camera worked after I clean-flashed with 10.3.14, the new RR build and Pico.
Thanks.
But the front camera rises up with a noticable mechanical sound. I'm not sure whether it's some kind of sound effect or an actual mechanical sound.

 

[changstalicious]

is there a dual speaker mod built into this rom or any way to implement it?

 

[danielofata]

Distry flashed new build, front camera now works with no mechanical sound (before flashing to 1st build I came from xiaomi.eu_multi_HMK20ProMI9TPro_9.6.27_v10-9 with no problem (wipe factory and cache)... My only problem is when I lock the screen, it get black and blinks... cannot recall if i had this issue in other phone with this tipe of roms, dont know how to fix it... FP is better at registration, but still not working for unlock the phone..