[Rom] [Unofficial] [Stable] Android 9.0 for Redmi 5 rosy | aex 6.0 rom

[amirul.35]

I also have 3GB version and I haven't faced any of mentioned problems. My performance is always good and all animations are fluid, no lags whatsoever (even games run better than on MIUI). Only thing I can't confirm is the camera, because I use Google Camera from the start. To flash I used Batik Recovery if that helps.

do you have occasional delay when unlocking the screen? mine still having this problem

today I switched to the pixel launcher and it seems a little improve in term of ram usage. (i use yandex launcher at first)

 

[karolak-33]

Could you tell how did you flash this ROM? I have tried flashing and already bricked my phone once and the thread has confusing steps to install.

-unlock bootloader
-flash official TWRP through adb
-flash Batik Recovery (flash through TWRP)
Then everything exactly, step by step like on the first page (when you flash the .gsi just choose flash as a system)
Remember that first boot can take even few minutes.

do you have occasional delay when unlocking the screen? mine still having this problem

today I switched to the pixel launcher and it seems a little improve in term of ram usage. (i use yandex launcher at first)

Just like I said earlier, when I use FP to unlock, phone vibrates but screen stays black, and after 2-3sec it vibrates again and then unlock. When I use power button on the other hand there's no delay whatsoever. I'm using Nova Launcher and I haven't faced any issues. Lately you said that you flashed stock gapps. That can also be the problem (I had a lot of problems on my previous phone after flashing stock gapps - I recommend NANO)

 

[Arnab09]

I need some help with the installation here

How to Install
ALL LINKS ARE GIVEN BELOW

Unzip aex6.0.img.xy using zarchiver
Flash treble recovery.
Wipe - Dalvik/Art cache,System,data,cache,vendor
Flash Treble enabler
Flash Gsi

!!THEN REBOOT THE PHONE!!

Then again go to twrp
Flash gapps
Flash fingerprint fix
Flash volte fix


So , here's my problem
1. Unzipping the aex package gives me a img file , do i need to flash that ? or do i need to make a zip file ? ( I'm a noob when it comes to flashing and things)
2. I flashed Baltik recovery , I hope it'll do ?
3. When exactly do i need to flash the aex package (img/zip) ? I mean like flash rom>flash gapps( the usual procedure right ?)

Thanks in advance guys

 

[karolak-33]

I assume if you want to install this you've already unlocked your bootloader and flashed TWRP, if not, just do this first. If you've done this then...
- Put all of your downloaded files for example on your SD Card
- Unzip aex 6.0.img and put .img file for example on your SD Card
- Flash treble recovery - Batik is fine
- Reboot to recovery (power+vol+) Wipe -> advanced wipe -> Dalvik/Art cache, System, data, cache, vendor
- Flash Treble enabler (Install -> choose your .zip file)
- Flash Gsi (Install -> Install Image -> select your .img file -> choose instal as system
- REBOOT
- Again go to recovery
- Flash gapps (i recommend nano package)
- Flash fingerprint fix
- Flash volte fix
- REBOOT and you're done
Just do everything step by step and it will work.

 

[Arnab09]

I assume if you want to install this you've already unlocked your bootloader and flashed TWRP, if not, just do this first. If you've done this then...
- Put all of your downloaded files for example on your SD Card
- Unzip aex 6.0.img and put .img file for example on your SD Card
- Flash treble recovery - Batik is fine
- Reboot to recovery (power+vol+) Wipe -> advanced wipe -> Dalvik/Art cache, System, data, cache, vendor
- Flash Treble enabler (Install -> choose your .zip file)
- Flash Gsi (Install -> Install Image -> select your .img file -> choose instal as system
- REBOOT
- Again go to recovery
- Flash gapps (i recommend nano package)
- Flash fingerprint fix
- Flash volte fix
- REBOOT and you're done
Just do everything step by step and it will work.

Thanks

But that question remained , I need to flash the aex img before gapps right ?

And most of the roms I've flashed are .zip but this one's .img , that makes me worry .

 

[Nishat14904BD]

Bro,,,can i use treble twrp instead of batik recovery?

 

[karolak-33]

Yes, you flash .img file -> reboot -> flash gapps. Why would you flash gapps when there's no system installed ? And yes, any recovery with treble support should do but I've used Batik, thats why I mentioned It - it's working for me.

 

[Arnab09]

Yes, you flash .img file -> reboot -> flash gapps. Why would you flash gapps when there's no system installed ? And yes, any recovery with treble support should do but I've used Batik, thats why I mentioned It - it's working for me.

Thanks
Actually I couldn't understand that the gsi was the rom itself , so that made me confuse.

 

[Jan294]

Thanks
Actually I couldn't understand that the gsi was the rom itself , so that made me confuse.

Thanks for asking. Exactly that point was confusing me too. I thought gsi is something that need to be flashed generally before the rom.

 

[honzikdrtikol23]

Hi. Pls i have another questions. I cant't find Smart lock setting and some tips how to disable double press power button to on camera on lock screen? Thx for rep.

 

[Fabrizio_Petrelli]

update

So there is no update for this rom?
Another question, now that i enabled treble, i can flash any treble rom, right?

 

[drnoellyg]

So there is no update for this rom?
Another question, now that i enabled treble, i can flash any treble rom, right?

Yeah just get the gsi and flash it. This ROM will come back later.

 

[Noobieflasher]

@AP hacker how to root this rom, please help

 

[karolak-33]

Just flash Magisk

 

[drnoellyg]

@AP hacker how to root this rom, please help

Remember how you flashed this rom? Go into Recovery and flash magisk17.1 or 17.2 and that's it. You can later download Root Checker from the Play Store to confirm you are rooted.

 

[A$h!$h]

hotspot work?

 

[karolak-33]

nope

 

[Pranav_007]

Can't enable volte

Hi!
This is a great rom but I am unable to enable volte. I tried installing ims.apk but nothing happened. Please help!
Thanks

 

[Switchonthelight]

Ir isn't working

 

[Jan294]

Ir isn't working

As mentioned in the bugs section...