• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][UNOFFICIAL] switchroot Android 10

Search This thread

NeMisiz

Member
Apr 3, 2009
7
1
So I've tried the guide multiple times. Everything seems to work fine with the installation right up until it tries to boot into TWRP/Android. I just get a black screen that sits until I power it down. I've tried different partition sizes, I've kept/overwritten the bootloader/switchroot folders that hekate puts on the SD before unzipping the rom zip. Someone did mention that the SD card quality could cause issues so I guess my next step will be to pick up a new one up and see if that helps. I had no issues using balenaetcher to put 15.1 on my switch but this method seems to be giving me some hangups. Any advice would be greatly appreciated.

Thanks,

Update 07/04. I wiped my SD card and started from step #1. This time after taking out the jig and unplugging the usb after android flash, I docked my joycons to the unit before continuing to TWRP and it worked. Not sure why this matters but hopefully it helps anyone else with the same issue.
 
Last edited:
  • Like
Reactions: Kagepan

i-am-batman

Member
Dec 30, 2017
15
4
Dorchester
Im very intrigued by the idea of running Android on the switch ive just got a few questions and im hoping someone has already tested and can confirm for me.
1. Is it possible to dual intsall cfw as well as android (in case i want to swap back and forth)?
2. Is there a specific size requirement for the android partition? I have a 400gb sd card and i dont want to lock it all down with android
3. Is there any risks with using exfat? Im aware that the guide states fat32 but id prefer ex due to the fact i can transfer files bigger then 4gb.
 

syntax1976

Member
Aug 11, 2010
11
1
Brantford
So I've tried the guide multiple times. Everything seems to work fine with the installation right up until it tries to boot into TWRP/Android. I just get a black screen that sits until I power it down. I've tried different partition sizes, I've kept/overwritten the bootloader/switchroot folders that hekate puts on the SD before unzipping the rom zip. Someone did mention that the SD card quality could cause issues so I guess my next step will be to pick up a new one up and see if that helps. I had no issues using balenaetcher to put 15.1 on my switch but this method seems to be giving me some hangups. Any advice would be greatly appreciated.

Thanks,

Update 07/04. I wiped my SD card and started from step #1. This time after taking out the jig and unplugging the usb after android flash, I docked my joycons to the unit before continuing to TWRP and it worked. Not sure why this matters but hopefully it helps anyone else with the same issue.

I'm running into this issue as well. I have even purchased multiple samsung EVO microsd cards (64g, 256g) and still no luck. I will wipe the sd and start again like you did and hopefully I can get past this as well. frustrating.
 
  • Like
Reactions: Kagepan

loginONETHREE

New member
Jun 6, 2021
2
0
So with my internet having a guest account, seems to be the only way for my switch to connect to wifi.

On another topic, are we able to disconnect our joycons without removing from the switch? They keep turning it on while it's in my bag killing the battery.
 

Kagepan

New member
Jul 9, 2021
1
0
I'm running into this issue as well. I have even purchased multiple samsung EVO microsd cards (64g, 256g) and still no luck. I will wipe the sd and start again like you did and hopefully I can get past this as well. frustrating.
Yeah, I'm at the same point. I've tried the whole thing 5 times, twice with the suggestion from @NeMisiz, but no luck. :(

It all runs through but goes black after it should boot into TWRP. The same happens if I try it from Hekate > More Configs > Switchroot Android 10 (while holding Vol+).
 
Last edited:

HisokaRyodan

New member
Nov 10, 2011
3
0
Love android on the switch and am setting up a 1tb android for emulation purposes. However, is there any way to disable the right joycon as a cursor? I there is a few threads asking if this can be done but I don't see any answer in how to do so or if there is something we can flash to do this. Thanks!
 

Techform

Member
Jul 7, 2021
5
0
Yeah, I'm at the same point. I've tried the whole thing 5 times, twice with the suggestion from @NeMisiz, but no luck. :(

It all runs through but goes black after it should boot into TWRP. The same happens if I try it from Hekate > More Configs > Switchroot Android 10 (while holding Vol+).
I ran into the same problem too, after that I reformatted the sd to exfat (the repartitioning formats it to FaT32 for you, and windows is weird) and followed this tutorial exactly, which worked twice in a row for me so maybe it'll work for you all too
 

futiless

Senior Member
Apr 4, 2012
256
19
41
Surrey
Yeah, I'm at the same point. I've tried the whole thing 5 times, twice with the suggestion from @NeMisiz, but no luck. :(

It all runs through but goes black after it should boot into TWRP. The same happens if I try it from Hekate > More Configs > Switchroot Android 10 (while holding Vol+).

I ran into the same problem too, after that I reformatted the sd to exfat (the repartitioning formats it to FaT32 for you, and windows is weird) and followed this tutorial exactly, which worked twice in a row for me so maybe it'll work for you all too
This process, didn't work with exFAT even.... I think its broken at latest hekate ?!
 

_RockNRoller

Member
Aug 16, 2013
37
5
valencia
twitter.com
hello lads! trying this one for my daugther´s swtich..

quick question, before doing all of this, after installing, can i just eject the sd card and boot into the normal swtich os?

or do i need to do something else to be able to do that.

i want to install android so she can play roblox, but i would like to be able to play some mario once in a while.
 

1ronik4

New member
Jul 23, 2014
4
0
So... I'm taking a chance and will try to install this, but I have a card with the old switchroot. What's the best way to make an integral copy of that card? And what's the best way to reformat it to start this process?
Thanks in advance
 

NeMisiz

Member
Apr 3, 2009
7
1
Yeah, I'm at the same point. I've tried the whole thing 5 times, twice with the suggestion from @NeMisiz, but no luck. :(

It all runs through but goes black after it should boot into TWRP. The same happens if I try it from Hekate > More Configs > Switchroot Android 10 (while holding Vol+).
Sorry it didn't work. Maybe I just got lucky. The only other thing I did differently that time was extract the Android zip into my PC first and copied it over to the SD card. That shouldn't matter in any capacity though. I am using Hekate 5.5.4 w/ Nyx 1.0.0. Make sure you take the jig out and unplug the USB before you begin the android flash process. I really thought the joycons being docked before booting into TWRP was the factor I was missing. Again, maybe I just got lucky. Stay tenacious, maybe check out different guides to see if there are any other variables to work with.
 

crony

Member
Jun 11, 2008
13
3
Use WinRar to extract the files if you're running into the black screen issue. I found this solution in the Switchroot discord and it solved the problem for me.
 
  • Like
Reactions: xrecartp

TyoLoki

Member
Mar 24, 2011
23
1
Hi, i've a question:

Now, I've using a Android TV LineageOS version (Android 10). But many of apps sideloaded (using Aptoide or download apk from Apkmirror) in my Switch don't work. Error on Google Play Store ("Sorry, you have to download this app from Google Play Store blah blah blah").
And Tablet version are very awful to using in docked mode.
My question is: It's anyway to install Tablet version and using same layout of Android TV?
And if I reinstall Android version, can I use the same partition (just boot in TWRP and install a fresh image of tablet version without erased a old partition)?

Thanks!
 

zmijek-ok

New member
Jul 26, 2021
3
0
When i try to install linux or lineage-os, it shows error coreboot mariko, any solution?
Of course i created linux partition before or android partition.
 

Hongtm77

Member
Apr 4, 2019
5
0
Hi, I have a patched erista and previously manage to install the older version of android. Im trying to do a fresh install of android 10 latest release, but I'm stuck on black screen when trying to boot to TWRP. Any suggestions?
 

Maiz96

New member
May 17, 2016
2
0
Hi, someone knows if there is a way to use usb tethering (from my smartphone) with this android build? Cuz it would be pretty interesting for playing stadia 😁
 

Top Liked Posts

  • There are no posts matching your filters.
  • 70
    Introduction
    A new, updated version of Android for the Nintendo Switch. Now based off of Android 10 (Q) (LineageOS 17.1 with Shield TV trees) it's faster, more responsive and has many new features over the previous release, including deep sleep and an Android TV build.

    Features
    • Android 10 based on Lineage 17.1
    • Significantly improved UI smoothness compared to Oreo.
    • OTA updates (bugfixes and new features without a reinstall).
    • Deep sleep that can last for weeks compared to hours in the previous version.
    • RSMouse support for controlling a mouse cursor with your right stick
    • Full Joy-Con and Pro Controller support with analog sticks and rails.
    • Hori Joy-Con support.
    • Uses Joy-Con HOS Bluetooth paring data.
    • Both Android TV and Android Tablet builds.
    • Reworked fan profiles for quieter operation.
    • Optimized dock support with resolution scaling.
    • OTG support including DisplayPort or HDMI output (no power supply necessary).
    • 3rd party dock/hub support including DisplayPort or HDMI output.
    • Rewritten charging driver to properly support USB-PD.
    • Optimized touch screen driver.
    • Easier install via hekate partition tool.
    • Reworked, simpler, power profiles.
    • Much improved WiFi driver with less dropouts.
    • Shield TV remote app support for easy docked control.
    • Reboot to payload support.
    • Improved Bluetooth accessory support.
    • Auto rotation support.

    Known Bugs:
    • Shield games are broken, DO NOT BUY THEM.
    • Joycons do not turn off in sleep automatically, make sure to turn them off by tapping the 'sync' button on side.
    • Default keyboard can't be used with a controller.

    Downloads
    Hekate - Extract zip to root of SD Card.
    ROM zip - choose one of these and extract to root of SD Card using 7-zip, not the built in windows extractor:
    Tablet - Works best undocked and has the full Android app library.​
    Android TV - Provides a great docked and undocked experience for media but may not support all apps and games.​

    Flashable Zips, don't extract but instead install in TWRP:
    Gapps - Use arm64 pico for tablet and arm64 tvmini for Android TV.
    Alarm Disable Zip - disables alarms and notifications in sleep in order to dramatically improve sleep time and avoid some SoDs.
    Xbox Joycon Layout Zip - Swaps a/b and x/y to match an xbox controller.​


    Installing
    What you will need:
    • An RCM exploitable Switch console. Check here to see if your device is exploitable. If you have a newer device an exploit may be possible on older firmwares, but if you haven't already set it up you probably updated to a too new version already. Read more here. (for non-RCM exploitable devices)
    • A jig or other method of triggering RCM. Here's a few methods. Premade jigs can be found online.
    • A computer.
    • A good USB-C cable that can connect to your PC and Switch.
    • A high quality, high speed microSD card of at least 16GB.
    • A way to read microSD cards on your PC.
    Steps:
    1. Be aware that if you have any previous Android Oreo installs on your SD card your old Android data will be wiped, so back it up. This cannot be avoided!
    2. If you have an existing Q install make sure it was created with hekate v5.5.3 or newer, anything else will have broken OTAs due to a missing MSC partition.
    3. Ensure your SD Card is FAT32 formatted, this guide will not work with EXFAT SD cards.
    4. Grab the files you want from the Download section and place on your SD. Extract only the hekate zip and the ROM zip once, use 7-zip, not the built in windows extractor.
    5. Overwrite any existing existing files and keep any flashable zips compressed.
    6. Boot into the normal switch firmware with your joycons docked to the console, this will pair them.
    7. Now boot your switch into hekate, dock your Joy-Cons and select the 'Nyx Options' menu then select 'Dump Joy-Con BT' in the top right.
      nyx20890123_202109.png

      nyx20890123_204917.png
    8. Ensure the message looks as follows, if not then re-pair Joy-Cons in normal FW.
      3.png
    9. Now return to the hekate main menu and select 'Tools' then 'Partition SD Card' in the top right.
      nyx20890123_204922.png

      nyx20890123_204928.png
    10. Drag the Android slider to assign the amount of space you want for Android, the HOS slider shows how much space the normal Switch OS can use.
    11. Now press next step, follow the instructions, if requested, backup your files with UMS to your PC and restore them afterwards with the UMS option.
    12. Select the 'Flash Android' option and follow the steps, then press continue to reboot to recovery.
    13. If you miss the opportunity to reboot to recovery go to 'More Configs' and select 'switchroot Android 10' while holding volume up, keep holding till the TWRP logo shows.
    14. Once you're in TWRP swipe the bar to allow modifications and press 'Install'.
    15. Press 'Select Storage' in the bottom right and choose 'Micro SD Card'
    16. First install the Lineage zip, ignore any errors that come up, they are expected.
    17. Then install any other zips you want to install, do not install zips meant for O, they will not work!
    18. After you're done installing zips, press reboot to system in TWRP.
    19. Enjoy your new Android install! To launch it in the future use the 'More Configs' -> 'switchroot Android 10' option in hekate.
    20. If setup gets stuck on voice detection go back to the wifi config page in the setup and select "Skip for now"
    21. Checkout the Tips & Tricks section below for some things to do.
    Updating:
    • Updates will be pushed through OTAs and you will get a notification when they are available - just install through there. Your data will be unharmed.

    Changelog:
    OTA 12/02/2021:
    • Fixes deep sleep crashes on most devices.
    • Fixes BT audio lag and stutter in most apps.
    • Fixes bluetooth crash issues that affected some devices.
    • Fixes joycon LEDs not being turned off when docked.
    OTA 10/05/2021:
    • Dramatically increases deep sleep battery life.
    • Adds support for controlling the mouse cursor with a controller's right stick.
    • Fixes various controller input issues with procon and the D-Pad in minecraft.
    • Fixes broken hori joycons.
    • Improved app launch times.
    • Adds support for more ethernet -> USB adapters.
    Tips & Tricks:
    • To enable Performance Mode and change resolution go to Settings -> Scroll Down -> System -> Scroll Down -> Display and Performance configuration.
    • If you don't need notifications or alarms you should grab the alarm disable zip in downloads, it increases sleep time by several orders of magnitude.
    • The Nvidia Shield TV app is a must have for docked usage, allowing keyboard and mouse control from a phone.
    • If you don't set a password the switch will auto-unlock after being docked.
    • The capture button on the Joy-Cons is mapped to Play/Pause media.
    • You can enable desktop mode to have a slightly better docked experience by going to Developer Options and scrolling down to 'Force Desktop Mode' enable that and reboot.
    • To see battery percentage on ATV follow this guide.
    • If you want to use a controller to type on tablet then install this keyboard.
    • To run tablet apps on ATV use this launcher.
    • For root the latest magisk can be flashed in TWRP
    • To transfer files to Android you can use MTP over USB.


    Stay in touch
    Discord: https://discord.gg/9d66FYg
    Twitter: https://twitter.com/switchroot_org
    Website: https://switchroot.org/

    Sources
    https://gitlab.com/switchroot/android
    https://gitlab.com/switchroot
    See manifest repo for build instructions.

    Credits
    Ave - Handling hosting of OTAs and the switchroot website. Check out her patreon!
    CTCaer - Fixing a lot of things in the kernel - charging, dock, touch etc - and adding Android install support for nyx. Donate to his patreon here!
    Langerhans - Figuring out the majority of stuff for deep sleep and helping massively with initial bringup.
    Steel01 - Maintaining the Shield TV Lineage trees which ours are heavily based on.
    Nvidia + Nintendo - ❤
    Everyone else who contributed!
    6
    runs great games run great emulators runs great but my bluethoot headphones cut in and out the audio for some reazon maybe a bug anyone having the same problem? apart from that android is running great
    Will be fixed in next OTA
    Running great except "Bluetooth" keeps crashing multiple times after starting up the system.
    But Bluetooth works afterwards.

    Is this a known issue?

    thx

    Does anyone has the same issue?
    Will be fixed in next OTA

    I was able to get some logs concerning my broken Wifi. Below is a logcat of me tapping on the wifi icon in the notification dropdown. There's some errors and I hope it helps getting to the bottom of the problem.

    Code:
    =u:r:magisk_client:s0:c84,c256,c512,c768 tcontext=u:r:hal_graphics_allocator_default:s0 tclass=fd permissive=1 app=com.android.terminal
    02-08 20:40:39.375  6777  6777 I su      : type=1400 audit(0.0:714): avc: denied { read } for name="audio.primary.tegra.so" dev="mmcblk0p3" ino=536 scontext=u:r:magisk_client:s0:c84,c256,c512,c768 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1 app=com.android.terminal
    02-08 20:40:39.375  6777  6777 I su      : type=1400 audit(0.0:715): avc: denied { getattr } for path="/vendor/lib/hw/audio.primary.tegra.so" dev="mmcblk0p3" ino=536 scontext=u:r:magisk_client:s0:c84,c256,c512,c768 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1 app=com.android.terminal
    02-08 20:40:39.375  6777  6777 I su      : type=1400 audit(0.0:716): avc: denied { read } for name="bin" dev="mmcblk0p3" ino=26 scontext=u:r:magisk_client:s0:c84,c256,c512,c768 tcontext=u:object_r:vendor_file:s0 tclass=dir permissive=1 app=com.android.terminal
    02-08 20:40:39.727  6781  6781 D AndroidRuntime: >>>>>> START com.android.internal.os.RuntimeInit uid 0 <<<<<<
    02-08 20:40:39.733  6781  6781 I AndroidRuntime: Using default boot image
    02-08 20:40:39.734  6781  6781 I AndroidRuntime: Leaving lock profiling enabled
    02-08 20:40:39.739  6781  6781 I /system/bin/app_process: Core platform API reporting enabled, enforcing=false
    02-08 20:40:39.888  6781  6781 D ICU     : Time zone APEX file found: /apex/com.android.tzdata/etc/icu/icu_tzdata.dat
    02-08 20:40:39.906  6781  6781 I /system/bin/app_process: The ClassLoaderContext is a special shared library.
    02-08 20:40:39.930  6781  6781 W /system/bin/app_process: JNI RegisterNativeMethods: attempt to register 0 native methods for android.media.AudioAttributes
    02-08 20:40:39.938  6781  6781 D AndroidRuntime: Calling main entry com.android.commands.content.Content
    02-08 20:40:39.957  6781  6781 D AndroidRuntime: Shutting down VM
    02-08 20:40:39.967  6574  6574 I RenderThread: type=1400 audit(0.0:717): avc: denied { call } for scontext=u:r:untrusted_app_27:s0:c129,c256,c512,c768 tcontext=u:r:hal_cplservice_default:s0 tclass=binder permissive=1 app=com.topjohnwu.magisk
    02-08 20:40:39.971  6574  6574 I RenderThread: type=1400 audit(0.0:718): avc: denied { call } for scontext=u:r:untrusted_app_27:s0:c129,c256,c512,c768 tcontext=u:r:hal_cplservice_default:s0 tclass=binder permissive=1 app=com.topjohnwu.magisk
    02-08 20:40:41.115  3376  3376 I InputReader: type=1400 audit(0.0:719): avc: denied { call } for scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
    02-08 20:40:41.972  3376  3911 W NotificationService: Toast already killed. pkg=com.topjohnwu.magisk [email protected]
    02-08 20:40:43.435  3149  3149 I storaged: type=1400 audit(0.0:720): avc: denied { call } for scontext=u:r:storaged:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
    02-08 20:40:43.463  3376  3398 W WindowManager: Unable to start animation, surface is null or no children.
    02-08 20:40:52.965  3376  3376 W WindowManager: removeWindowToken: Attempted to remove non-existing token: [email protected]
    02-08 20:41:00.002  3586  3586 D KeyguardClockSwitch: Updating clock: 20:41
    02-08 20:41:08.115  3376  3412 E LightsService: Light requested not available on this device. 2
    02-08 20:41:08.117  3376  3470 E LightsService: Light requested not available on this device. 2
    02-08 20:41:46.319  3586  3586 D StatusBar: disable<e i a s b h r c s > disable2<q i n >
    02-08 20:41:46.363  3519  3538 D RSMouse : mFeatureEnabled=true  mPackageEnabled=true
    02-08 20:41:48.149  3376  4233 I WifiService: setWifiEnabled package=com.android.systemui uid=10097 enable=true
    02-08 20:41:48.149  3376  3485 D WifiController: StaEnabledState.enter()
    02-08 20:41:48.149  3376  3486 D WifiActiveModeWarden: received a message in WifiDisabledState: { when=0 what=0 target=com.android.internal.util.StateMachine$SmHandler }
    02-08 20:41:48.149  3376  3486 D WifiActiveModeWarden: Switching from WifiDisabledState to ClientMode
    02-08 20:41:48.149  3376  3486 D WifiActiveModeWarden: Entering ClientModeActiveState
    02-08 20:41:48.150  3376  3486 D WifiClientModeManager: entering IdleState
    02-08 20:41:48.150  3376  3486 D WifiActiveModeWarden: State changed from client mode. state = 2
    02-08 20:41:48.151  3376  3376 D WifiP2pService: Wifi enabled=false, P2P Interface availability=true
    02-08 20:41:48.151  3376  3486 I WifiVendorHal: Vendor Hal started successfully
    02-08 20:41:48.153  3376  3486 I SupplicantStaIfaceHal: Starting supplicant using HIDL
    02-08 20:41:48.154  3376  3487 I WifiP2pNative: Registering for interface available listener
    02-08 20:41:48.156  3376  3486 I android_os_HwBinder: HwBinder: Starting thread pool for getting: [email protected]::ISupplicant/default
    02-08 20:41:48.156  3376  3486 E SupplicantStaIfaceHal: Death handler already present
    02-08 20:41:48.161  3068  3068 E [email protected]: Failed to open wlan fw path param: No such file or directory
    02-08 20:41:48.155  3068  3068 I [email protected]: type=1400 audit(0.0:721): avc: denied { read } for name="fw_path" dev="mmcblk0p10" ino=784924 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:wifi_vendor_data_file:s0 tclass=lnk_file permissive=1
    02-08 20:41:48.161  3068  3068 E [email protected]: Failed to change firmware mode
    02-08 20:41:48.161  3376  3486 D HalDevMgr: updateRttController: no one is interested in RTT controllers
    02-08 20:41:48.161  3376  3486 E HalDevMgr: executeChipReconfiguration: configureChip error: 9 ()
    02-08 20:41:48.161  3376  3486 E WifiVendorHal: Failed to create STA iface
    02-08 20:41:48.161  3376  3486 E WifiNative: Failed to create STA iface in vendor HAL
    02-08 20:41:48.161  3376  3486 E WifiClientModeManager: Failed to create ClientInterface. Sit in Idle
    02-08 20:41:48.161  3376  3486 D WifiActiveModeWarden: State changed from client mode. state = 4
    02-08 20:41:48.161  3376  3486 D WifiClientModeManager: expected stop, not triggering callbacks: newState = 1
    02-08 20:41:48.161  3376  3486 E WifiNative: Could not get Iface object for interface null
    02-08 20:41:48.162  3376  3376 D WifiP2pService: Wifi enabled=false, P2P Interface availability=true
    02-08 20:41:48.162  3376  3486 D WifiActiveModeWarden: ClientMode failed, return to WifiDisabledState.
    02-08 20:41:48.162  3376  3486 D WifiController: ClientMode unexpected failure: state unknown
    02-08 20:41:48.162  3376  3486 D WifiClientModeManager:  currentstate: IdleState
    02-08 20:41:48.162  3376  3486 D WifiScanRequestProxy: Sending scan available broadcast: false
    02-08 20:41:48.162  3376  3489 I WifiScanningService: wifi driver unloaded
    02-08 20:41:48.163  3376  3486 I WifiScanRequestProxy: Scanning is disabled
    02-08 20:41:48.164  3376  3409 D KernelCpuUidUserSysTimeReader: Removing uids 1037-1037
    02-08 20:41:48.165  3376  3486 D WifiActiveModeWarden: Entering WifiDisabledState
    02-08 20:41:48.166  3376  3486 D WifiActiveModeWarden: received a message in WifiDisabledState: { when=-3ms what=3 target=com.android.internal.util.StateMachine$SmHandler }
    02-08 20:41:48.166  3376  3486 D WifiActiveModeWarden: Switching from WifiDisabledState to WifiDisabled
    02-08 20:41:48.166  3376  3486 D WifiActiveModeWarden: Entering WifiDisabledState
    02-08 20:41:48.166  3376  3486 E WifiNative: Could not get Iface object for interface null
    02-08 20:41:48.169  4206  4782 W Settings: Setting airplane_mode_on has moved from android.provider.Settings.System to android.provider.Settings.Global, returning read-only value.
    02-08 20:41:49.891  3069  3069 I joycond : type=1400 audit(0.0:722): avc: denied { read } for scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=netlink_kobject_uevent_socket permissive=1


    EDIT:

    I also grabbed a dmesg which I have uploaded to my server since it's too large to attach here

    Grepping for "wifi"/"wlan" yields a whole lot of errors, for example:
    service "vendor.wifiloader" exited with status 255

    Naturally, wifi works just fine in Horizon, just in case you suspect faulty hardware
    Thanks, does it only crash after sleep?

    How Can I reboot to hekate ? Thanks
    Reboot and hold vol-
    For me the sleep mode is not working. Battery draining really fast. Anyone with the same problem?
    Should be fixed in OTA
    Today my Lp0 didn't work. I use CPU spy to observe this. This happened after a reboot.

    My switch stayed on with 100mhz all the time but screen was off.

    I turned wifi and bt on and off. This helped. Afterwards my switch went into deep sleep again and stayed there as long as the screen was off.

    Maybe this helps.
    Should be fixed in OTA
    5
    Flash this in TWRP and reboot. It fixes ZL ZR button for the pro controller in bluetooth.
    5
    I'm unable to connect to wifi.
    4
    anyone get safetynet to pass?
    I flashed it and gapps and tested safety net and it failed. Wasn't sure if there was something I missed

    yes I did. To me a while to work out but you have to:

    1. Mans sure you have flashed magisk
    2. In the manager install busybox and magiskhidepropsconf
    3. Reboot
    4. Install termux from the App Store
    5. Open termux and type ‘su props’
    6. Option 1 then follow the instructions to change the fingerprint to nvidia shield tv pro 2019
    7. Reboot and it all works