• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM/VENDOR][ONEUI3.1][M31 PORT] TreeUI 0.9.4 BETA for A8/A8+/A7

Search This thread

Cidehjanuzaj

New member
Nov 23, 2016
2
0
Hi everyone..... I just flash the file on my A8plus and it works fine but it got bricked after instaling Viper Modules from Lxposed... Now it is stuck on the boot loop and Oem is locked and I can't boot into recovery... Any help
Tried to install Stock firmware which is android 9 but it resulted in an error (Sv Rev check fail Device 7 Binary 6) which means I can't downgrade from 11 to 9. So, any help will be much appreciated.
Waiting
 

g000n

Senior Member
Sep 4, 2015
247
64
Hi everyone..... I just flash the file on my A8plus and it works fine but it got bricked after instaling Viper Modules from Lxposed... Now it is stuck on the boot loop and Oem is locked and I can't boot into recovery... Any help
Tried to install Stock firmware which is android 9 but it resulted in an error (Sv Rev check fail Device 7 Binary 6) which means I can't downgrade from 11 to 9. So, any help will be much appreciated.
Waiting

Remove Viper Modules using Magisk Manager for Recovery mode


Download the zip, flash it in TWRP, it will run, then disable or best to remove the module
 

Cidehjanuzaj

New member
Nov 23, 2016
2
0
Remove Viper Modules using Magisk Manager for Recovery mode


Download the zip, flash it in TWRP, it will run, then disable or best to remove the module
I cant actually enter into recovery mode as I ignorantly forget to unlock OEM Lock. So, im stuck into download mode and I cant flash anything due to (Sv Rev check fail Device 7 Binary 6) error in odin.
 

PinoKappa76

New member
Aug 11, 2021
1
0
ntyhXyb.png

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

(No, the ROM has nothing to do with trees, it's just OneUI 3)
Welcome to Android 11, and OneUI 3!
This ROM is a direct port of OneUI 3 from the Samsung Galaxy M31 to the Galaxy A8/A7 family.
It can be used on Treble and Non-Treble phones. If you use it with treble enabled, it will install a vendor compatible with Android 11 GSIs too!

Features
-Based on M315FXXU2BUC1
-Slight debloat
-OneUI Core 3.1
-TreeUI Kernel with 4.4.185
-Includes Android 11 vendor (Full vndk, works with vndklite too)
-Support for A530F, A530W, A530N (seems broken, please someone that can debug, contact me), A730F, A750*

What doesn't work:
[Common]
-Samsung Camera (3rd party apps should work)
-Face unlock
-Torch intensity control
-Jack has some faint noises while no media is playing

What works:
-Everything else

Installation:
-(Optional, A8 only) Treble your phone using the treble guide
-Flash zip in custom recovery
-Wipe data
-Reboot!

Downloads/Changelog:
0.9.4 BETA (ROM+VENDOR, VENDOR ONLY NOT DONE YET)
- NFC Fixed on A7 (Thanks, @Voytec83)
- SSRM warning removed.
- Bluetooth fix readded.
- Kernel zram tweaks, and Wireguard support
- Fixed installation on modern non-treble TWRP
0.9.3 BETA (ROM+VENDOR, VENDOR ONLY NOT DONE YET)
- Updated system to OneUI 3.1 (M315FXXU2BUC1)
- Added initial Galaxy A7 support (thx for the testers!)
- Removed FaceService as it was crashing constantly.
- Fixed updatable apexes (Google Play System Updates)
- TreeUI Kernel is now 0.9.3
0.9.2 BETA (ROM+VENDOR, VENDOR ONLY)
- Added CSC stuff (defaults to XEH for now)
- Fixed WiFI Hotspot
- Partially fixed jack connector (there is some noise while no media is playing)
- Fixed Device Care (but the fix does give you a popup every time you restart)
- Fixed Vulkan
- Debloated some Samsung camera stuff
- Added support for A530N (Korean A8 model) Broken? Please someone that can debug on A530N, contact me!
- Added separate vendor only version
- TreeUI Kernel is now 0.9.2
0.9.1 BETA (ROM+VENDOR)
- First public release

Source Code:
GitHub

Credits:
-Me
-@prashantp01, and @ananjaser1211 for lots of fixes, and help! Go support them!
-@arminhere, @Hovo01, @Voytec83, and @VenusEleven for testing!
when is the stable version expected to be released?
 

raducu_20048

New member
Oct 20, 2021
1
0
I have a weird bug where the always on display shows that my battery status is „charging” even when it's not charging or connected to anything. Any solutions?
I've tried to cear AOD chache and data and to restart the device.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 28
    ntyhXyb.png

    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    (No, the ROM has nothing to do with trees, it's just OneUI 3)
    Welcome to Android 11, and OneUI 3!
    This ROM is a direct port of OneUI 3 from the Samsung Galaxy M31 to the Galaxy A8/A7 family.
    It can be used on Treble and Non-Treble phones. If you use it with treble enabled, it will install a vendor compatible with Android 11 GSIs too!

    Features
    -Based on M315FXXU2BUC1
    -Slight debloat
    -OneUI Core 3.1
    -TreeUI Kernel with 4.4.185
    -Includes Android 11 vendor (Full vndk, works with vndklite too)
    -Support for A530F, A530W, A530N (seems broken, please someone that can debug, contact me), A730F, A750*

    What doesn't work:
    [Common]
    -Samsung Camera (3rd party apps should work)
    -Face unlock
    -Torch intensity control
    -Jack has some faint noises while no media is playing

    What works:
    -Everything else

    Installation:
    -(Optional, A8 only) Treble your phone using the treble guide
    -Flash zip in custom recovery
    -Wipe data
    -Reboot!

    Downloads/Changelog:
    0.9.4 BETA (ROM+VENDOR, VENDOR ONLY NOT DONE YET)
    - NFC Fixed on A7 (Thanks, @Voytec83)
    - SSRM warning removed.
    - Bluetooth fix readded.
    - Kernel zram tweaks, and Wireguard support
    - Fixed installation on modern non-treble TWRP
    0.9.3 BETA (ROM+VENDOR, VENDOR ONLY NOT DONE YET)
    - Updated system to OneUI 3.1 (M315FXXU2BUC1)
    - Added initial Galaxy A7 support (thx for the testers!)
    - Removed FaceService as it was crashing constantly.
    - Fixed updatable apexes (Google Play System Updates)
    - TreeUI Kernel is now 0.9.3
    0.9.2 BETA (ROM+VENDOR, VENDOR ONLY)
    - Added CSC stuff (defaults to XEH for now)
    - Fixed WiFI Hotspot
    - Partially fixed jack connector (there is some noise while no media is playing)
    - Fixed Device Care (but the fix does give you a popup every time you restart)
    - Fixed Vulkan
    - Debloated some Samsung camera stuff
    - Added support for A530N (Korean A8 model) Broken? Please someone that can debug on A530N, contact me!
    - Added separate vendor only version
    - TreeUI Kernel is now 0.9.2
    0.9.1 BETA (ROM+VENDOR)
    - First public release

    Source Code:
    GitHub

    Credits:
    -Me
    -@prashantp01, and @ananjaser1211 for lots of fixes, and help! Go support them!
    -@arminhere, @Hovo01, @Voytec83, and @VenusEleven for testing!
    2
    Not available... Please develop version of SM-A530N...
    That's the korean model, right? Will try adding basic support soon, but if my assumptions are correct, it should work fine with the A530F version until then. (You'll have to modify the updater script, so it actually installs on A530N, just look for any text saying A530F, and replace it.)
    Please test it when I add support later, as I only have an A530F!
    2
    Thanks, I know :D
    Hey, appreciate the ROM, just had a question:
    Is the s20 one or the m31 one better?
    Depends, S20 definitely seems smoother and is more feature-packed, but you lose VoLTE for now if that's important for you.
    Oh, I also found that hotspot don't work neither 2.4 nor 5.0 GHz modes.
    That's a phh issue, I told phh about it and made a pull request that he accepted. Next release will have a fix, until then you can do `setprop persist.sys.phh.system_hostapd false` in a root or adb terminal.
    1
    Great work.. I'll try the stable build for sure.. Thank you... :cool:;)
    1
    @VDavid003, @prashantp01, @ananjaser1211, @arminhere, @Hovo01, @Voytec83, @VenusEleven

    Thank to each one of you for this amazing contribution 👏👏👏👏