• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][WIP] CM10.1 Badadroid v2.1

Status
Not open for further replies.
Search This thread

Sandeep Srikantam

Senior Member
Aug 4, 2013
113
30
New Delhi
THANK YOU!!!

Hello to all
Thank you Tigrouzen and volk (i'm posting this here because i'm following volk's ROM, It is very difficult to understand your thread as it contains many roms) for this dedication to enable calls,

BTW can you post only the zimage as it is difficult to download 150-200 MB every time a update comes in kernel.

thank you
 

florynwk3

Senior Member
Nov 18, 2012
176
42
Bradford
Hello to all
Thank you Tigrouzen and volk (i'm posting this here because i'm following volk's ROM, It is very difficult to understand your thread as it contains many roms) for this dedication to enable calls,

BTW can you post only the zimage as it is difficult to download 150-200 MB every time a update comes in kernel.

thank you

Developers doesn't change only zImage,they change things is OS too so it's necessary to download that zip.

Sry for bad english :D
 

Taxidriver05

Senior Member
Mar 30, 2012
468
157
Schkopau - OT Ermlitz
www.badania.de
Well...

I tested it in last 24 hours...
Generally it works pretty well on my Wave II...
BUT: This version has an enormous battery Usage...
battery callibration is set to zero when starting bada. So it can only be started, when plugged in into charger. Otherwise it will shut down directly after booting.
bad performance after booting. Later it works pretty well.
No mobile internet...

I think, it is now in a pre-beta status...
 

smrai3

Member
Sep 17, 2013
29
1
Cape Town
Best governer for battery life

is it Powersave,ondemand and conservative for battery life?

---------- Post added at 08:06 PM ---------- Previous post was at 07:33 PM ----------

getting sdcard0 and not sdcard and i just realised that when i was trying to play kwaak3(quake 3) on my phone is there maybe a alternative fix or change the directory for the app cache?
 
Last edited:

mahmoudfarg

Member
Sep 20, 2013
36
1
Alexandria
I followed the steps till step 8
when i press Power and Call key it shows message in red FOTA OUTPUT ENABLED BL3 DLOAD MODE .......
and noting happens after waiting so i tried to hold the power key and the volume up .. the recovery shows up and i continued the setps to 11 and after the rom is successfully installed i didn't now what to do !!!
when i reboot holding the power key it boots bada
when i reboot holding the power and call key it show the same again
in red FOTA OUTPUT ENABLED BL3 DLOAD MODE .......
i wait long but nothing happens
when i reboot using power and volume up it shows recovery menu
so what to do ?
 

abou7mied

Member
Apr 16, 2012
8
1
Great job developers :good::good:

Mic now working and recording Videos and Sounds.

Big thank for all developers :eek:

I followed the steps till step 8
when i press Power and Call key it shows message in red FOTA OUTPUT ENABLED BL3 DLOAD MODE .......
and noting happens after waiting so i tried to hold the power key and the volume up .. the recovery shows up and i continued the setps to 11 and after the rom is successfully installed i didn't now what to do !!!
when i reboot holding the power key it boots bada
when i reboot holding the power and call key it show the same again
in red FOTA OUTPUT ENABLED BL3 DLOAD MODE .......
i wait long but nothing happens
when i reboot using power and volume up it shows recovery menu
so what to do ?

You should hold First [Call key] then hold +[End key] not vice versa.
 
Last edited:

Riyuk

Member
Sep 14, 2013
10
0
Rome
first of all: forgive my ignorance!

1 - coming from bada (yeah, you know..) i do not differences between various gapps (full gapps, lite gapps, jesus gapps ...) and google-play-only.
could someone explain quickly?

2 - is there any way to remove/change installed gapps, with a lighter version or google-play-only, without re-flashing whole android?

thank you :)
 
Apr 4, 2011
22
3
i just received calls from my friend.. i don't have any bugs in calls..

i feel like i'm using bada on CM10.1 v1.2.. the call sound is very clear..

i'm already test to calling my other phone, but i still don't have any bugs :angel:

thx 4 devs for your great work :victory:

sorry for my bad english :eek:
 
  • Like
Reactions: blue966

blue966

Senior Member
Jan 11, 2012
84
23
ESFAHAN
I think battery life is more important than the GPRS/EDGE...
because we have not a good battery life how to use mobile data?

now battery drain is fast...
my problem is SMSC & Battery drain

thanks dev guys for your hard work
 

volk204

Inactive Recognized Developer
Mar 15, 2011
366
2,274
Moscow region
Dear volk:angel:
this is my logcat & dmesg after rgistration network
thank you very much for attention to our problem:fingers-crossed:

OK now i need log with sending SMS, also restart phone, and after correct net registration try to send message and after catch logs

06918919015000 it is number of SMSC in PDU format from your log.
+9891100500 is it correct number of SMSC? if no give me correct SMSC number
 
  • Like
Reactions: blue966

blue966

Senior Member
Jan 11, 2012
84
23
ESFAHAN
OK now i need log with sending SMS, also restart phone, and after correct net registration try to send message and after catch logs

06918919015000 it is number of SMSC in PDU format from your log.
+9891100500 is it correct number of SMSC? if no give me correct SMSC number

Hi volk
yes,+9891100500 this number is my SMSC
and i try to use GO SMS v5.24
change SMSC in setting manualy but still message not sent...
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 174
    MOD EDIT: Thread closed at Volk's request. You can find his CM 10.2 here.

    CM10.1 for WAVE and WAVE 2
    Android Jellybean 4.2.2

    READ http://code.google.com/p/badadroid/ and http://code.google.com/p/badadroid/wiki/FrequentlyAskedQuestions BEFORE POSTING (thanks to huntkb for updating it)


    FEATURES
    Android 4.2.2
    CM sources of 21.10.2013
    Updated to linux kernel version 3.0.86
    272 MB RAM
    F4k 720p patch for bigmem kernels (Video Fix)
    New key Mapping:
    - call key as CALL, Middle as HOME, endcall as ENDCALL
    - Long press ENDCALL will show power menu
    - lock key as POWER, framework patch is not yet ported
    - Navigation Bar activated
    - PIE control can be activated with Expanded desktop


    GAPPS
    http://goo.im/gapps/gapps-jb-20130301-signed.zip full gapps
    flash through CWM (recovery)

    KNOWN BUGS (what doesn't work):
    - Network registration don't work with some SIM cards
    - GPS - http://forum.xda-developers.com/showpost.php?p=47209249&postcount=1371
    - Conference Calls
    - Bluetooth headset in calls
    - Some problems with audio codec settings, but generally it should work
    - Impossible to shut down phone in android, only restart
    - Don't leave phone charging without supervising - if it gets enormously hot, disconnect it - this can literally blow up battery as there is no overheating protection yet. Do not leave it connected on 100% - it'll discharge by 1% all the time, and then recharge, what's very unhealthy for battery.
    Maybe something else, what i forgot

    SUPPORT
    You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.

    We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.

    Please join us on IRC: some people are on #badadroid (freenode).

    FIRST INSTALLATION
    Bada 2.0 is required

    1. Enter Bada Settings->General->Memory and make sure you have at least:
      370MB of free "System" memory
      160MB of free "User" memory
      400MB of free "Applications" memory
    2. Download BOOTFILES, armlinux_boot for your device:
      for 8500:
      http://yadi.sk/d/W4RjnjQRC6TfP
      http://yadi.sk/d/Yz7_dfpkC6TkC
      for 8530
      http://yadi.sk/d/kxJ0CZ20C7AKF
      http://yadi.sk/d/zqzWZ9LmC7AJA
      (please pay attention if it's S8500 or S8530 BOOTFILES and FOTA you're choosing!):
    3. Download ROM: http://www.multiupload.nl/HYU95BQ6D6
    4. Start Bada.
    5. Extract zImage from zip and copy it to the Bada's User partition (the one about 390MB big).
    6. Copy whole .zip to the Bada's User partition.
    7. Flash BOOTFILES and FOTA using Multiloader.
    8. Reboot the phone holding Power and Call key.
    9. FOTA set of red messages should appear, after about 15seconds Badadroid logo shows up.
    10. Be patient, first bootup will keep unresponsible on Badadroid logo for up to 5 minutes.
    11. CWM Recovery starts, pick:
      - install zip from sdcard
      - choose zip from sdcard
      - cm-10.1-wave-<release id>.zip
      - Yes - install
    12. Reboot holding the Power key
    You can remove installation .zip from the User partition from Android level by connecting through USB in MTP mode.
    Do not remove zImage file.
    Normal bootup is available using Power+Call keys
    CWM Recovery mode is available using Power+Volume Up keys
    CWM Flashing does overwrite zImage. So every next update you can just flash .zip through CWM.

    HOW TO UNINSTALL
    Follow the steps there: http://forum.xda-developers.com/showpost.php?p=35107469&postcount=393

    CHANGELOG:

    Lite ROM by Hero355 based on v2.1 http://forum.xda-developers.com/showpost.php?p=47351443&postcount=1514

    v2.1 http://www.multiupload.nl/HYU95BQ6D6
    - CM sources 05.11.2013
    - [NETWORK] Added WCDMA only (UMTS900/2100) Mode selection
    - Fixed modem power mode transition.
    - [GPRS] Added suspend/resume network
    - [SIM] Added basic SIM_IO implementation: reading Contacts, Messages, Voicemail number, SPN, ICCID from SIM card
    - [SMS] Code optimization and cleanup. Thanks for Rebellos
    - [SMS] Added MMS receiving
    - Updated audio codec gain table from bada proprietary files
    - And included all another updates after v2.0

    BT fix for Wave 2 http://www.multiupload.nl/JAPFB1FLNS Thanks Tigrouzen for idea and BenzoX for testing
    Just Flash it via Recovery

    Kernel update for v 2.0 http://www.multiupload.nl/E68CJFUHGK
    - Fixed wave 2 screen calibration. thanks to krischat1001

    RIL_update2 for v2.0 http://www.multiupload.nl/E1JBJU4LTS
    - some memory leaks fixed
    - set low level debug AMSS
    - some another fixes, probably can resolve restart in long idle state

    RIL Update for v2.0 http://www.multiupload.nl/OP6YZQJ09Z
    - Fix for IMSI reading
    I hope now mobile internet will be work on all phones
    APN settings should load automatically. Most of APN is stored in ROM in system/etc/apns-config.xml
    If APN is not loaded automatically check this file and add APN settings in it, if there are no in it.

    v2.0 http://www.multiupload.nl/PR4599CF5V
    - CM sources 21.10.2013
    - Mobile internet is fixed
    - Fixed search available networks and select networks
    - Fixed PIN and PUK entering
    - Fixed SIM PIN enable/disable/change
    - Fixed sending MMS, receiving is still not working
    - Fixed network indicator

    v1.3 http://www.multiupload.nl/DYXUMPUCQX
    - CM sources of 26.09.2013
    - [RIL] Сompleted CALL interface, except conference call, but i really never use it before.
    If you report bug please attach logs with detailed description, i really tested most of causes with hangup, activate and holding calls and etc, but it is too many cases, and probably i didn't meet some and don't know that this cause is exist.
    - Some optimization from platform side, ported from aries

    RIL Update2 for v1.2 http://www.multiupload.nl/NMIONOUBJ9
    - Reworked Call interface
    - Just flash it via Recovery

    RIL Update for v1.2 http://www.multiupload.nl/CSTPY6UKNU
    - [SIM] Corrected reading SMSC from SIM card
    - [CALL] Added DTMF support
    - Just flash it via Recovery

    v1.2 http://www.multiupload.nl/3QF7PV7HJR
    - CM sources of 17.09.2013
    - Added TARGET_ARCH_LOWMEM for Dalvik
    - Fixed gsm voicecall common setting in audio codec (Big Thanks for Tigrouzen)
    - Fixed all audio ril pathes except Bluetooth audio pathes

    Kernel Update for v1.1 http://www.multiupload.nl/LM89AO62TG
    - Audio recording and video recording fixed
    - So now we can use VoIP applications on wave with Wi-Fi
    - Audio in call is still broken
    Big thank to Rebellos. i just found good topic on ALSA forum with solution and Rebellos implemented solution

    v1.1 http://www.multiupload.nl/H0THJFGQAQ
    - CM sources of 14.08.2013
    - Fixed vibrator (Thanks to Rebellos)
    - Fixed ENDCALL button behavior(Forgot to include it in v1)

    v1 http://www.multiupload.nl/KT7LG7HXDJ
    Initial release
    CM sources of 8.08.2013
    Update compared to Rebellos CM10 ROM http://forum.xda-developers.com/showthread.php?t=1851818
    - Android 4.2.2 CM10.1 based
    - Updated to linux kernel version 3.0.86
    - ROW i/o scheduler
    - 272 MB RAM
    - F4k 720p patch for bigmem kernels (Video Fix)
    - New key mapping
    - Navigation bar activated

    THANKS TO
    Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
    Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen and many others.
    CyanogenMod team for base ROM
    Paulk and Replicant project for good base for bada-modem RIL
    and many other who help us.

    MORE LINKS
    Overall project thread - http://forum.xda-developers.com/showthread.php?t=1459391
    42
    Update

    Vesrion1.2
    Now we can talk on wave in android! Calls fixed!

    CHANGELOG:
    CM sources of 17.09.2013
    Added TARGET_ARCH_LOWMEM for Dalvik
    Fixed gsm voicecall common setting in audio codec (Big Thanks for Tigrouzen)
    Fixed all audio ril pathes except Bluetooth audio pathes

    Big Thanks to Tigrouzen!
    41
    Update

    New version

    v2.0 http://www.multiupload.nl/PR4599CF5V

    - CM sources 21.10.2013
    - Mobile internet is fixed
    - Fixed search available networks and select networks
    - Fixed PIN and PUK entering
    - Fixed SIM PIN enable/disable/change
    - Fixed sending MMS, receiving is still not working
    - Fixed network indicator

    Big kudos to Rebellos
    36
    Kernel update:
    Audio recording and video recording fixed
    So now we can use VoIP applications on wave with Wi-Fi
    Audio in call is still broken

    Big thank to Rebellos. i just found good topic on ALSA forum with solution and Rebellos implemented solution

    Just put new zImage on phone partition

    http://www.multiupload.nl/LM89AO62TG
    33
    v2.1 http://www.multiupload.nl/HYU95BQ6D6

    - CM sources 05.11.2013
    - [NETWORK] Added WCDMA only (UMTS900/2100) Mode selection
    - Fixed modem power mode transition.
    - [GPRS] Added suspend/resume network
    - [SIM] Added basic SIM_IO implementation: reading Contacts, Messages, Voicemail number, SPN, ICCID from SIM card
    - [SMS] Code optimization and cleanup. Thanks for Rebellos
    - [SMS] Added MMS receiving
    - Updated audio codec gain table from bada proprietary files
    - And included all another updates after v2.0

    Big Thanks to Rebellos for his help

    Please report bug with logs, without logs it is useless
    HOW-TO catch logs http://forum.xda-developers.com/showpost.php?p=44475319&postcount=2

    From my point of view main RIL functions is ready. Now just need test and fix bugs)