[ROM][WIP][NAND] Omni 5.1 Lolipop 22.03.2015

Search This thread

volk204

Inactive Recognized Developer
Mar 15, 2011
366
2,274
Moscow region
Android Lolipop 5.1​

Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DOESN’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.



Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

KNOWN BUGS (what doesn't work):

- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
- disabled SELINUX
- Camera key don't start camera app
- TV out removed, because it is not working yet
- many custom features from omni is still not merged

SUPPORT
You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.
We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.

Please join us on IRC: some people are on #badadroid (freenode).

NOTE: DEVELOPERS WANTED. Please contact us if you are a developer with something to contribute.
I do heavily encourage to work together on the better, common project instead of making kang releases and demanding money for somebody else's work.
Read as: If you think you can make something better than this by doing less and muchazo Ctrl+C Ctrl+V - you suck, go figure the rest.

INSTALLATION


FIRST INSTALLATION

Bada 2.0 is required
Warning! It will remove Bada!


Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel https://yadi.sk/d/ilhyKTaEfTo6L
FOTA https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES https://yadi.sk/d/cBPD41VEbP2od
"start" kernel https://yadi.sk/d/wVGzUA96fGW55
FOTA https://yadi.sk/d/-WnbHbFHfNgZK

Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System

First start take about 10-15 min, be patient.
Enjoy OMNI!

You can remove installation .zip from Android level by connecting through USB in MTP mode.
TWRP Recovery mode is available using VolUp + End keys
Every next update you can just flash .zip through CWM.

UPDATE from OMNI 4.4 (version after 09.09.2014)
Warning! you will lose all data, because it is highly recommended to wipe data, during changing rom base
- Go to Recovery
- Wipe -> Advanced wipe -> check "data" and "system" -> Swipe to wipe -> waiting for wipe -> Back
- Mount -> Mount USB storage
- Copy zip with Rom from PC -> Unmount -> Back
- Install -> choose zip with ROM -> Swipe to Confirm Flash -> wait for flashing (about 10 min) -> Home
- Reboot -> System

For activation Performance and Developer Options categories in Settings you need Settings->About Phone and tap 7 times on Build number

ROOT
Omni is without root support from default
To activate root flash zip via Recovery from XDA thread http://forum.xda-developers.com/showthread.php?t=1538053


GAPPS

GAPPS make our ROM slowler, because also slim GAPPS take about 15-20 MB RAM permanently
https://mega.co.nz/#F!G0QXXRAC!pZ063qCaa5lxdD73SarU6Q

HOW TO UNINSTALL
Just reflash bada via Multiloader

CHANGELOG:
22.03.2015 https://yadi.sk/d/UAs4xDLlfTm4U
Warning! You need updated FOTA!!!
- Omni sorces 22.03.2015 Android-5.1
- Updated Zram driver
- And many other fixes to make our Wave more stable on Android-5.1

07.02.2015 https://yadi.sk/d/SeW7BBgkeXqZz
- Omni sorces 07.02.2015 + some chery-picks from gerrit
- fixed front camera
- fixed flashlight tile in Quick Settings
- updated Wi-Fi driver
- Added F2FS driver, not tested by me yet (just change file system during format /data in recovery to F2FS and it should work)

27.01.2015 https://yadi.sk/d/7sK0awO7eHWbM
- Omni sorces 27.01.2015 + some chery-picks from gerrit
- updated sensors

15.01.2015 https://yadi.sk/d/JyRL5wqfe26xo
- Initial release
- Omni sorces 15.01.2015 + some chery-picks from gerrit

THANKS TO
Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
and many other who help us.
 
Last edited:

volk204

Inactive Recognized Developer
Mar 15, 2011
366
2,274
Moscow region
BUG REPORTS
This is the format for a bug report: “XXXXX isn’t working. Here is how to fix it: [INCLUDE SOLUTION]” Don’t have source? Too bad.
You’ll have to wait then.
If you report bugs, please don’t be disappointed if we can’t fix them immediately (or even never). It’s not because we don’t care, but because we don’t have time or don’t know how to fix it.
Please attach logcat and dmesg dump in your bug report. Dmesg should contain messages from both - bootup and issue occuring (you can't dump it 1 hour after bootup, rather 2 minutes after)
How to dump logs - Google for "android logcat dmesg" Or... whatever, here's one of 3204109 methods available.
In the Terminal Emulator enter:
"su"
Accept request for SuperUser access.
"dmesg > /storage/sdcard1/dmesg.txt"
"logcat -b system -b radio -b events -b main -d -f /storage/sdcard1/logcat.txt *:V"
"logcat -b radio -d -f /storage/sdcard1/radiolog.txt *:V"
Download them from phone, archive and upload them.
Privacy warning: Your logcat might contain sensitive information like your IMEI, IMSI, cell stations you were nearby, numbers you called and got calls from and SMS sent and received. If you don't want to publish this info - send them privately to one of developers.

Bug reports without logs are completely useless.
 
Last edited:

ice_ice

Senior Member
May 11, 2012
202
107
www.youtube.com
The Rom is amazing , fast and responsive ,better than omni 4.4 , some little bugs to report
1- Battery save mode won't activate stupid me usb was connected
2- (screen pinning) , you can't unpin it , task manger and back keys won't work together , i'm not sure ..... you must reboot the device
3-when you install apps from sd card , installation keep showing that it is on progress , but when you turn screen to landscape mode , it shows that the apps is installed
Warning!
you will lose all data
installation take about 10 min, and first boot is also about 10 min or more
backed up my data , flashed the rom ,boot , all my data and config are still there :confused:

A quick video review : :p
 
Last edited:

docamr

Member
Feb 16, 2014
38
8
Thank you very much Volk204

You are simply great Volk204. :cowboy: Congratulations. :laugh:
Awesome work. :good:
Please continue your work and give us a better and stable Lollipop Omni Rom for wave. :eek:
 

chapito

Senior Member
May 12, 2007
218
18
Thanks volk204, you are the beast and the best developer

Thanks for continuing to work on this as "old" mobile phone and so little support from Samsung.
You're the only developer that follows the "gap".
Continuous and hopefully not abandon us.
A greeting.
 

volk204

Inactive Recognized Developer
Mar 15, 2011
366
2,274
Moscow region
The Rom is amazing , fast and responsive ,better than omni 4.4 , some little bugs to report
1- Battery save mode won't activate
2- (screen pinning) , you can't unpin it , task manger and back keys won't work together , i'm not sure ..... you must reboot the device
3-when you install apps from sd card , installation keep showing that it is on progress , but when you turn screen to landscape mode , it shows that the apps is installed

backed up my data , flashed the rom ,boot , all my data and config are still there :confused:

It is recommend to do full wipe, when you change rom base, duty flash bring many problem. i think it is the reason of not working battery save mode for you.
don't understand problem of screen
 

ice_ice

Senior Member
May 11, 2012
202
107
www.youtube.com
It is recommend to do full wipe, when you change rom base, duty flash bring many problem. i think it is the reason of not working battery save mode for you.
don't understand problem of screen


1- stupid me :D charger was connected ; so every time i activated it goes off :p
2-it was about screen pinning feature in security settings , once activated (you pinned an app) you can't disable by clicking on overview(recent apps) and back ,so
(see screenshots)
3-Battery draining and voltage controle i noticed this on omni 4.4 the first time
Screenshot_2015_01_17_17_52_16.png

there was a big difference between the computed and observed power use
i did some testing on Omni , i played with the voltage control entries , and observing the time in state, i came to this conclusions :
  • 100 Hz and 200 Hz work on the same voltage , seeing that most of time in state are in 100 HZ and in this frequency ,CPU would take more time to accomplish tasks than in 200HZ , it is only logical to reduce the voltage on 100 HZ ,
  • tried doing that but you can not apply values :confused: , without a 3rd party app like Setcpu , kernel bug :confused: i don't know .
  • i played with value and here is the value the phone freeze at it (governors was set to performance , and max value is the freq tested) :
  • 100HZ-750mv 200HZ-800mv 400HZ-875mv 800HZ-1075mv 1000HZ-1175mv
  • i used 125 mv above this setting , with no freezing or problems :highfive: , but it needs more testing
  • battery life :good: improved notably
  • i use interactive with 200HZ-1200HZ , more voltage on 1200HZ but it do tasks in less time than 1000HZ
  • Mr @volk204 why there is no low frequency like 500HZ 600HZ , rather than jump from 400HZ to 800HZ
 

Attachments

  • Screenshot_2015-01-17-16-43-00.png
    Screenshot_2015-01-17-16-43-00.png
    61.5 KB · Views: 1,901
  • Screenshot_2015-01-17-18-00-14.png
    Screenshot_2015-01-17-18-00-14.png
    36.7 KB · Views: 1,881
Last edited:
  • Like
Reactions: alispeedsport

Majd7667

Senior Member
May 29, 2013
159
29
Thanks!!

Hi volk204, you did a very good job all over from the beginning, and now we have android lolipop on wave devices! isn't that amazing?!
Thank you very much for what you did! You gave the wave another future! "cheers" :good:
 

Majd7667

Senior Member
May 29, 2013
159
29
Gapps Lolipop

Hi guys, i've found a link for android lolipop gapps (mini, normal, full).

Here you go : Link
Have a good day! :good:

Edit: i just tried to install it for the first time, it is very laggy and reboot much every time it reboots it restart from beginning, we should wait to see why.

Edit 2: Updated link
 
Last edited:
  • Like
Reactions: docamr

BenzoX

Senior Member
Nov 11, 2013
296
276
Grenoble
Hi guys, i've found a link for android lolipop gapps (mini, normal, full).

Here you go : Link
Have a good day! :good:

Edit: i just tried to install it for the first time, it is very laggy and reboot much every time it reboots it restart from beginning, we should wait to see why.

I would try with the smallest package available here if i had a wave : http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Maybe laggy but shouldn't crash (not tested).
 
  • Like
Reactions: docamr

Majd7667

Senior Member
May 29, 2013
159
29
I would try with the smallest package available here if i had a wave : http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Maybe laggy but shouldn't crash (not tested).
You're right, i didn't search more for that i thought that the minimum is the link i included but what it says just apply for the package and not all.
Thanks for the link i'm gonna test.

Edit: Tested and working great, there is no lag compared to the link i provided!
 
Last edited:
  • Like
Reactions: RoyalSniper

m90ultimate

Senior Member
Apr 30, 2011
181
42
First of all, volk204, thanks a ton for all your time and brain, that you engaged for this project. I really appreciate it. :good:
I was just wondering if it was possible to modify camera driver for Omni 5.0 Lolipop to support RAW image capturing ?:confused:
 

echelonx

Senior Member
Dec 2, 2013
140
86
teknobolge.com
@volk204 Turko CFW 10.2 is running on my Samsung Wave device. I flashed bootfiles, kernel and fota. Then I did this: Advanced -> Terminal Command -> Select -> Type "sh partition.sh". When I try to flash the Rom from Internal Storage, It says "E:Error executing updater binary in zip." I don't know why.
 
Last edited:

kktkaran

Senior Member
Dec 7, 2012
685
150
ahmedabad
First of all, volk204, thanks a ton for all your time and brain, that you engaged for this project. I really appreciate it. :good:
I was just wondering if it was possible to modify camera driver for Omni 5.0 Lolipop to support RAW image capturing ?:confused:

u Guys are still using waves ?
i bought Galaxy Alpha 50 days ago. ;)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 55
    Android Lolipop 5.1​

    Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DOESN’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.



    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    KNOWN BUGS (what doesn't work):

    - Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
    With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
    - Conference Calls
    - Some problems with audio codec settings, but generally it should
    - After Recovery time to time incorrect capacity of battery
    - disabled SELINUX
    - Camera key don't start camera app
    - TV out removed, because it is not working yet
    - many custom features from omni is still not merged

    SUPPORT
    You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.
    We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.

    Please join us on IRC: some people are on #badadroid (freenode).

    NOTE: DEVELOPERS WANTED. Please contact us if you are a developer with something to contribute.
    I do heavily encourage to work together on the better, common project instead of making kang releases and demanding money for somebody else's work.
    Read as: If you think you can make something better than this by doing less and muchazo Ctrl+C Ctrl+V - you suck, go figure the rest.

    INSTALLATION


    FIRST INSTALLATION

    Bada 2.0 is required
    Warning! It will remove Bada!


    Download BOOTFILES, Kernel and FOTA for your device:
    for 8500:
    BOOTFILES https://yadi.sk/d/KhxqKyg4bP2nu
    "start" kernel https://yadi.sk/d/ilhyKTaEfTo6L
    FOTA https://yadi.sk/d/OtpVoaXpfNggE
    for 8530
    BOOTFILES https://yadi.sk/d/cBPD41VEbP2od
    "start" kernel https://yadi.sk/d/wVGzUA96fGW55
    FOTA https://yadi.sk/d/-WnbHbFHfNgZK

    Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
    After reboot it will open android recovery
    Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
    Wait before on screen you will see "Partitions had been prepared"
    Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
    Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
    Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
    Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
    Wait for flashing (about 10 min) -> Reboot System

    First start take about 10-15 min, be patient.
    Enjoy OMNI!

    You can remove installation .zip from Android level by connecting through USB in MTP mode.
    TWRP Recovery mode is available using VolUp + End keys
    Every next update you can just flash .zip through CWM.

    UPDATE from OMNI 4.4 (version after 09.09.2014)
    Warning! you will lose all data, because it is highly recommended to wipe data, during changing rom base
    - Go to Recovery
    - Wipe -> Advanced wipe -> check "data" and "system" -> Swipe to wipe -> waiting for wipe -> Back
    - Mount -> Mount USB storage
    - Copy zip with Rom from PC -> Unmount -> Back
    - Install -> choose zip with ROM -> Swipe to Confirm Flash -> wait for flashing (about 10 min) -> Home
    - Reboot -> System

    For activation Performance and Developer Options categories in Settings you need Settings->About Phone and tap 7 times on Build number

    ROOT
    Omni is without root support from default
    To activate root flash zip via Recovery from XDA thread http://forum.xda-developers.com/showthread.php?t=1538053


    GAPPS

    GAPPS make our ROM slowler, because also slim GAPPS take about 15-20 MB RAM permanently
    https://mega.co.nz/#F!G0QXXRAC!pZ063qCaa5lxdD73SarU6Q

    HOW TO UNINSTALL
    Just reflash bada via Multiloader

    CHANGELOG:
    22.03.2015 https://yadi.sk/d/UAs4xDLlfTm4U
    Warning! You need updated FOTA!!!
    - Omni sorces 22.03.2015 Android-5.1
    - Updated Zram driver
    - And many other fixes to make our Wave more stable on Android-5.1

    07.02.2015 https://yadi.sk/d/SeW7BBgkeXqZz
    - Omni sorces 07.02.2015 + some chery-picks from gerrit
    - fixed front camera
    - fixed flashlight tile in Quick Settings
    - updated Wi-Fi driver
    - Added F2FS driver, not tested by me yet (just change file system during format /data in recovery to F2FS and it should work)

    27.01.2015 https://yadi.sk/d/7sK0awO7eHWbM
    - Omni sorces 27.01.2015 + some chery-picks from gerrit
    - updated sensors

    15.01.2015 https://yadi.sk/d/JyRL5wqfe26xo
    - Initial release
    - Omni sorces 15.01.2015 + some chery-picks from gerrit

    THANKS TO
    Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
    Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox and many others.
    OMNI team for base ROM
    Pawitp, kasper_h and all other aries developers
    Paulk and Replicant project for good base for bada-modem RIL
    and many other who help us.
    14
    I found some free time and built ROM
    https://yadi.sk/d/2iirt3Xbh9sMZ
    Enjoy ))
    13
    ROM Updated to 5.1
    Enjoy :)
    13
    11
    The Rom is amazing , fast and responsive ,better than omni 4.4 , some little bugs to report
    1- Battery save mode won't activate stupid me usb was connected
    2- (screen pinning) , you can't unpin it , task manger and back keys won't work together , i'm not sure ..... you must reboot the device
    3-when you install apps from sd card , installation keep showing that it is on progress , but when you turn screen to landscape mode , it shows that the apps is installed
    Warning!
    you will lose all data
    installation take about 10 min, and first boot is also about 10 min or more
    backed up my data , flashed the rom ,boot , all my data and config are still there :confused:

    A quick video review : :p
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone