[ROM][WT88047][M][6.0.x] CyanogenMod official builds
- Thread starter ketut.kumajaya
- Start date
Recently i change my xiaomi 2 ROM, from CM13.1 Kumajaya to Linage 7.1.
And flash firmware that are suggest for Linage 7.1
I want back to CM13.1, but it's keep bootloop.
I think maybe the firmware that i flash for Linage 7.1 isn't support for CM 13.1, because when i flash Linage 7.1 it's work properly.
Isn't it because firmware? Or else?
If yes, where can i get firmware for CM 13.1? and how?
I Read first page, but i dont understand about flashing firmware.
Thankyou before.
Sorry for my english.
And flash firmware that are suggest for Linage 7.1
I want back to CM13.1, but it's keep bootloop.
I think maybe the firmware that i flash for Linage 7.1 isn't support for CM 13.1, because when i flash Linage 7.1 it's work properly.
Isn't it because firmware? Or else?
If yes, where can i get firmware for CM 13.1? and how?
I Read first page, but i dont understand about flashing firmware.
Thankyou before.
Sorry for my english.
Yes and no,,Kumajaya already got new device long time ago and development for 6.0.1 already dead..is this rom even working on WT86047 aka HM2014813 ? are kumajaya still updating this CM rom or not ?
Sent from my 2014813 using Tapatalk
if u want marshmallow go with mokee its the bestis this rom even working on WT86047 aka HM2014813 ? are kumajaya still updating this CM rom or not ?
was updated till last month.
the final history release is very stable
ah i will try it. but i have same problem here. my phone is WT86047 not WT88047 is it still working ?
around 3.30-4 hrs moderate..
2.30 hrs heavy usage
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
meanwhile you should also think about the data bug in mokee.. online games don't work correctly
VoLTE & Application Circle Bar
Please excuse me for repeating the question.I am with Reliance Jio Sim with VoLTE function.If VoLTE is fully functioning in this ROM I want to install this ROM. Although there many Nougat ROMs with VoLTE,I read in xda that only in Lollipop and Marshmallow ROMs it is functioning well.So anybody please inform whether VoLTE is fully functional in this ROM.
Also please inform me whether Application Circle Bar is included in this ROM.
Waiting with thanks...
Please excuse me for repeating the question.I am with Reliance Jio Sim with VoLTE function.If VoLTE is fully functioning in this ROM I want to install this ROM. Although there many Nougat ROMs with VoLTE,I read in xda that only in Lollipop and Marshmallow ROMs it is functioning well.So anybody please inform whether VoLTE is fully functional in this ROM.
Also please inform me whether Application Circle Bar is included in this ROM.
Waiting with thanks...
I tried it with jio sim but it got bootloop while it was working well with other sim. But volte is working perfectly fine on mokee mm.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
186CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, dead cats, * thermonuclear war, or you getting fired because the alarm app failed. * YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will break it! :P * Act accordingly */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information:
This thread is for CyanogenMod 13.0 opensource builds for Wingtech WT88047, marketed as Redmi 2 by Xiaomi (but I'm not sure this company really exist). The following will not be supported in this thread:
- Custom Kernels
- Mods
- Modified system files
- Xposed
Instructions:
Comprehensive installation instructions for CM on Wingtech WT88047 can be found on the CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Install_CM_for_rendang
Issues?
Experience issues? Please provide the following info:
- If the device was hard reboot, please provide the file "/sys/fs/pstore/console-ramoops".
- If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
- Please use Pastebin when possible.
Download Links:
Official build: https://download.cyanogenmod.org/?device=wt88047
Google Drive: https://goo.gl/zhGZjQ
EmfoxZhou's build: https://goo.gl/iQNZjC
Recomended Recovery:
Stock CM or TWRP recovery: https://goo.gl/cDJQXI
TWRP source: https://github.com/kumajaya/android_bootable_recovery
Recomended GApps:
Open GApps ARM - 6.0 - Micro: http://opengapps.org/
I would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Known Issues:
Both back and front still picture camera not workingSound out from both speaker and headset if headset already connected on a rebootBefore get locked, hardware GPS disturbing network location service- Use VOL UP + VOL DOWN + POWER button to enter recovery mode
- If you experiencing a random freeze, tell me your MMC type. You can check it using "dmesg | grep mmcblk0" command as root or use SD Insight app by HumanLogic. Known chip in Redmi 2 variant:
- Redmi 2 8 GB:
- H8G2d 7.28 GiB - Hynix - inside my Redmi 2, no freeze
- QN1SMB 7.28 GiB - Samsung
- P1J95K 7.29 GiB - Numonyx Micron - reported random freeze
- Redmi 2 16 GB:
- HAG2e 14.6 GiB - Hynix
- R1J96N 14.6 GiB - Numonyx Micron
- Redmi 2 8 GB:
- Experienced low benchmark result? Check https://github.com/kumajaya/android...mmit/ebed706cb93a924d9c0f068b8a155928069b64fe For benchmark oriented user, you can edit /system/build.prop, boot to recovery to clear dalvik-cache, and reboot.
This ROM not compatible to the new Lollipop bootloader.Please check post #3 how to restore back KitKat bootloader (at your own risk!).Build 20160624 and newer compatible to both KitKat and Lollipop bootloader.- Don't set preferred network type to LTE only, some network service not working on LTE carrier and switching to GSM carrier needed
Contributors:
ketut.kumajaya (rebased someone else kernel to Cyanogen's MSM8916 kernel in 5 days continues hacking, rendang device tree changes, rendang vendor blobs changes, fix, fix, fix, etc), someone else (initial open source kernel for stock KitKat ROM), @zwliew (initial device tree reference, kernel fix contribution)
Source Code:
- Device tree: https://github.com/CyanogenMod/android_device_wingtech_wt88047
- Kernel source: https://github.com/CyanogenMod/android_kernel_wingtech_msm8916
- Vendor blobs: https://github.com/TheMuppets/proprietary_vendor_wingtech
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
If you want to donate a few bucks for the work we're doing in our freetime:
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-11-07
Last Updated 2016-01-2542Current manifest:Code:<?xml version="1.0" encoding="UTF-8"?> <manifest> <project name="kumajaya/android_device_wingtech_wt88047" path="device/wingtech/wt88047" remote="github" revision="cm-13.0" /> <project name="kumajaya/android_kernel_cyanogen_msm8916" path="kernel/cyanogen/msm8916" remote="github" revision="cm-13.0-amss-2.1-wt88047" /> <project name="kumajaya/proprietary_vendor_wingtech" path="vendor/wingtech" remote="github" revision="cm-13.0" /> <project name="kumajaya/android_device_cyanogen_msm8916-common" path="device/cyanogen/msm8916-common" remote="github" revision="cm-13.0" /> <project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" /> <project name="CyanogenMod/android_external_stlport" path="external/stlport" remote="github" /> <!-- Optional busybox --> <project name="CyanogenMod/android_external_busybox" path="external/busybox" remote="github" /> </manifest>
Current cherry-pick:
- Ignore null USSD dialing number:http://review.cyanogenmod.org/133154New M blobs from rendang fix USSD issue
- Property for GPU compositing: http://review.cyanogenmod.org/13299841FlashI'm not sure this completeinstructionstill needed for the current build:
- Download the ROM, download OpenGApps for ARM 6.0 micro from http://opengapps.org/
Turn off your phone, pull out the SIM card- With my latest TWRP build installed, boot to your TWRP recovery
- Backup your ROM, format your /system, /data, /cache
- Flash the ROM,
don'tflash GApps! - Normal boot your phone. If you are lucky, after the optimization process done, Google and Cyanogen Setup Wizard will appear
[*]Playing your brand new OS for a while and then power off your phone. Insert back the SIM card
[*]Boot to recovery, flash GApps and then directly delete /system/priv-app/SetupWizard using TWRP file manager!
[*]Normal boot your phone, Google apps will be repeatedly force close
[*]Open Settings - Apps. From the menu, tap "Show system" and then give all permissions needed by every Google apps installed (GMail, Google Account Manager, Google App, Google Backup Transport, Google Contacts Sync, Google Play Services, Google Play Store, Google Services Framework)
Just flash ROM update as usualbut always remove GApps SetupWizard every time you update GApps.
How to Flash Firmware and Modem
Don't mix between firmware version (i.e KitKat sbl1 with Lollipop aboot)!
Flash a complete firmware partitions:
Code:fastboot flash tz tz.mbn fastboot flash hyp hyp.mbn fastboot flash sbl1 sbl1.mbn fastboot flash rpm rpm.mbn fastboot flash aboot emmc_appsboot.mbn
Flash a complete firmware backup partitions:
Much easy if you always backup your firmware in TWRP.Code:fastboot flash tzbak tz.mbn fastboot flash hypbak hyp.mbn fastboot flash sbl1bak sbl1.mbn fastboot flash rpmbak rpm.mbn fastboot flash abootbak emmc_appsboot.mbn
Flash modem partitions:
Code:fastboot flash modem NON-HLOS.bin4133
