[ROM][WWE][09.02.09] viBranZeOS 1.0 UC Supported | Based on 5.05.405.1 | Fully Loaded

[lpsi2000]

vibranze, Welcome, it is always nice to see Chefs here. Are you planning on providing cabs for the stuff you have removed? Some of the stuff you removed I actually use and I am sure I could probably dig up cabs for most of them. I also think it would nice for your audience to have cabs that are made specifically and tested with your ROM. Just a thought.

 

[vibranze]

Hi lpsi2000,

Thanks. For a time being I do not have a plan to create a CABs for removed apps. You can easily find it around.

Let me know what apps you are currently use and I see if I can put them back.

V

vibranze, Welcome, it is always nice to see Chefs here. Are you planning on providing cabs for the stuff you have removed? Some of the stuff you removed I actually use and I am sure I could probably dig up cabs for most of them. I also think it would nice for your audience to have cabs that are made specifically and tested with your ROM. Just a thought.

 

[shlomki]

can anyone tell me if the HD keyboard works well in landscape mode?

 

[lievenvw]

Hi Vibranze,

Thanks for sharing your rom. I'm always flashing to check new roms & I just flashed your rom. I always do a hardreset right after the flash. Anyway, after the hardreset, it booted fine, and then I got the typical "please click to configure your device screen". After that you usually get the screen with the crosses to calibrate the touch screen. Well I got nothing. A blanc white screen. Waited for over 5 minutes, still nothing.

Hardresetted again. Same problem. removed battery, let it boot again, and it booted fine.

not saying that it's an issue with your rom, just reporting it.

thanks

Lieven

 

[vibranze]

Hi Lievenvw,

Thanks for testing and feedback. Sometime I also encountered the same white screen but after soft reset normally the screen alignment process will start again without blank screen. Is it because of device specific?

I will check and see if I can produce the same error.

Cheers,
V

Hi Vibranze,

Thanks for sharing your rom. I'm always flashing to check new roms & I just flashed your rom. I always do a hardreset right after the flash. Anyway, after the hardreset, it booted fine, and then I got the typical "please click to configure your device screen". After that you usually get the screen with the crosses to calibrate the touch screen. Well I got nothing. A blanc white screen. Waited for over 5 minutes, still nothing.

Hardresetted again. Same problem. removed battery, let it boot again, and it booted fine.

not saying that it's an issue with your rom, just reporting it.

thanks

Lieven

 

[Maldoro]

Every thing
W.O.N.D.E.R.F.U.L

Powered by viBranZeOS

 

[Maldoro]

Hi Vibranze,

Thanks for sharing your rom. I'm always flashing to check new roms & I just flashed your rom. I always do a hardreset right after the flash. Anyway, after the hardreset, it booted fine, and then I got the typical "please click to configure your device screen". After that you usually get the screen with the crosses to calibrate the touch screen. Well I got nothing. A blanc white screen. Waited for over 5 minutes, still nothing.

Hardresetted again. Same problem. removed battery, let it boot again, and it booted fine.

not saying that it's an issue with your rom, just reporting it.

thanks
Lieven

I am reporting the same
but i did not have to hard reset for the second time
i just reset, turn off the screen then it goes Perfect
anyway
this rom is wonderful TF3D, SPEED, APPLICATIONS, GPS , EVERY THING
THANK YOU Vibranze

 

[lievenvw]

sorry if I was unclear. I didn't need to hardreset, I did a hardreset just to see if the problem would happen again.

It's a minor thing

my touch pro is a default Belgium HTC branded touch pro. not carrier locked or rebranded or anything.

 

[lpsi2000]

Hi lpsi2000,

Thanks. For a time being I do not have a plan to create a CABs for removed apps. You can easily find it around.

Let me know what apps you are currently use and I see if I can put them back.

V

Appreciate it, but I am fine for right now. I was just making a general comment. Thank you

 

[silentdrum]

Chinese Input

well since this is a CJK supported ROM, thought some guys might need chinese input. uploaded here is Plum SIP, chinese input.

Link to the forum/threads:
http://www.dayhand.com/bbs/viewthread.php?tid=6651&extra=page=1&filter=type&typeid=1

 

[Leechoonhwee]

Mirror?

Any mirror on this? Rapidshare is killing me!

 

[vibranze]

@Leechoonhwee,

I'm uploading it to 4shared.com, will update the thread once finished.

Alternate download mirror

V

 

[clia]

May I ask if this ROM is ready for 1.11.25.01 radio? Thanks.

 

[Leechoonhwee]

Some Bugs

Battery did not correctly reflect the actual status and Diamond Config does not work.

 

[mikkka]

Font

Please!
Can you help me?
where is the font or dpi in the rom?
The icons and words is little.
How do you do it?
Which is the font file, files?
Xip porting?
92 dpi? or 131 dpi?

 

[vibranze]

Hi,

I think so, I don't think there is a restriction for certain radio to be used with certain ROM

V

May I ask if this ROM is ready for 1.11.25.01 radio? Thanks.

 

[vibranze]

Hi,

Thanks for reporting. The battery issue is derived from the latest build itself but I didn't encounter it here. As for Diamond TF3D Config, if this is what you meant, yes it's not working. In the new version which I'm testing now it's been solved already. I will post it once everything's finalized.

V

Battery did not correctly reflect the actual status and Diamond Config does not work.

 

[clia]

Thanks. While I am still trying several different roms to find one that could be the best for me, I like this one especially it makes BeeJive IM works. Is there any trick for that?

 

[vibranze]

@clia,

Thanks for using my ROM. There is no trick for BeeJive IM as I just converted it from cab to OEM. I didn't even know if BeeJive have any problem

V

 

[clia]

@clia,

Thanks for using my ROM. There is no trick for BeeJive IM as I just converted it from cab to OEM. I didn't even know if BeeJive have any problem

V

Thank you for making and sharing this ROM.

For BeeJive IM, I have found the answer. BeeJive IM requires different .NETCF 2.0 and SQLCE 3.0 which are missing from many cooked ROMs (only .NETCF v3.5 included). The instruction here will solve this problem. Just for reference in case someone has the same issue. It's a great app.