[ROM][X00TD][9.0.0][OFFICIAL] LineageOS 16.0

[virganda]

060 got modem issues? Really?

Yeah i got problem before, but i didnt know its because modem 060 or not. Now i use modem 059 and it work well. This lineage 16.0 is my favorite rom because stability and the battery is so good.
I love android 10 but for now it didnt good enough stability for me.

 

[ghsabyasachi]

Can anybody tell me airtel volte works or not?

 

[G.E.A]

dt2w not workng in latest nightly build

 

[medidasunil_agrimet]

Ghost touch problem while using ear phones need to be resolved

 

[olzge]

I'm still experiencing similar issues. While I'm watching a vid on YouTube, volume drops suddenly to 50% even without me holding the phone in my hands. After raising volume it can happen at any time again.

I've finally managed to solve this problem by going to the Settings, System Profiles, my respective profile, Volume Overrides, Media: There I've unchecked "Override volume". It has never ocurred since then.

 

[arun3010]

Is there any way to disable gestures completely when device is locked

 

[Vvk380]

dt2w not workng in latest nightly build

Thats bcoz gesture_node value sets back to 0 after every restart...
Its in root>sys>kernel>touchpanel
Dclicknode is for D2tw
And gesture_node is for touchscrn gestures
Both should be 1 to work gestures and dt2w..

In ur case just toggle dt2w in display settings after boot...will solve problem..

---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------

Thats bcoz gesture_node value sets back to 0 after every restart...
Its in root>sys>kernel>touchpanel
Dclicknode is for D2tw
And gesture_node is for touchscrn gestures
Both should be 1 to work gestures and dt2w..

In ur case just toggle dt2w in display settings after boot...will solve problem..

@arun3010

---------- Post added at 08:26 AM ---------- Previous post was at 08:24 AM ----------

Thats bcoz gesture_node value sets back to 0 after every restart...
Its in root>sys>kernel>touchpanel
Dclicknode is for D2tw
And gesture_node is for touchscrn gestures
Both should be 1 to work gestures and dt2w..

In ur case just toggle dt2w in display settings after boot...will solve problem..

@arun3010

 

[arun3010]

Bro do i need to flash the firmware before flashing lineage ROM. It is not mentioned in the installation procedure page . can you help me.

 

[Vvk380]

Bro do i need to flash the firmware before flashing lineage ROM. It is not mentioned in the installation procedure page . can you help me.

Yup may be 059 is suggested

 

[Rotblaag]

On a fresh en clean install i can not skip voice assistant setup AND fingerprint setup
if i want to skip either of these it will return for firtst step of initial phone setup

 

[farhanshaikh671]

In 21 apr build:
1) ctsProfile fail (magisk hide props doesn't work either)
2) buggy network icon (no issues with actual connectivity)
3) volume slider always shows media volume (eg. to control alarm volume you have to expand the volume slider)

 

[droidsometimes]

In 21 apr build:
1) ctsProfile fail (magisk hide props doesn't work either)
2) buggy network icon (no issues with actual connectivity)
3) volume slider always shows media volume (eg. to control alarm volume you have to expand the volume slider)

1) https://mobile.twitter.com/topjohnwu/status/1251712525843918853

2) no clue, and you forgot to mention what OS/build you were running before that build

3) that's 'normal' behaviour, is it not?


Sent from my Zenfone Max Pro M2 using XDA Labs

 

[farhanshaikh671]

1) https://mobile.twitter.com/topjohnwu/status/1251712525843918853

2) no clue, and you forgot to mention what OS/build you were running before that build

3) that's 'normal' behaviour, is it not?


Sent from my Zenfone Max Pro M2 using XDA Labs

1) thanks for the source.
2) it was a clean install. (from havocos 9.0 20190921 final build)
3) my brain hurts trying to describe it better, but that's not what usually happens in others roms.

 

[Vvk380]

1) thanks for the source.
2) it was a clean install. (from havocos 9.0 20190921 final build)
3) my brain hurts trying to describe it better, but that's not what usually happens in others roms.

For cts profile hide magisk in magisk setting and then use magisk hide config props..it works

 

[farhanshaikh671]

For cts profile hide magisk in magisk setting and then use magisk hide config props..it works

Thanks for the suggestion, but i have already tried that. It just doesn't work with this rom. It says something similar to "service.sh could not be executed at boot" in terminal emulator. I tried emulating the script using kernel adiutor's init.d emulation but still didn't work. Now I'm on stock pie until a fix comes out.

 

[cops346]

Hello, sorry for out of topic question. Is there way to download the Lineage 15.1 Oreo final release since its no more available on official site. Maybe someone has the backup I will gladly appreciate it. Thank you.

 

[Cookie Ninja]

@SagarMakhar, I'm on stock Oreo 340, BL unlocked and rooted, never upgraded to pie because of poor performance as compared to Oreo. If I want to upgrade to official LOS16, do I have to flash latest pie firmware (63?) only? Or the whole pie ROM? Thanks and great work

 

[SRBAzad]

@SagarMakhar, I'm on stock Oreo 340, BL unlocked and rooted, never upgraded to pie because of poor performance as compared to Oreo. If I want to upgrade to official LOS16, do I have to flash latest pie firmware (63?) only? Or the whole pie ROM? Thanks and great work

Flash firmware only... No need to flash the entire ROM..

 

[Cookie Ninja]

Flash firmware only... No need to flash the entire ROM..

What are the unresolved bugs in this ROM? (As compared to stock 340)
Speaker / headset/Bluetooth volume is low? Need NXP zip flash?
Dual VoLTE working?
USB otg working? Need to flash a custom kernel?
Ppl using this ROM, pl reply...

 

[Cookie Ninja]

What are the unresolved bugs in this ROM? (As compared to stock 340)
Speaker / headset/Bluetooth volume is low? Need NXP zip flash?
Dual VoLTE working?
USB otg working? Need to flash a custom kernel?
Ppl using this ROM, pl reply...

Bump. Any responders?