[ROM][ZIP] SM-G900P OG1 Stock Rooted Deodexed ROM v1.1

[rwilco12]

Hey everyone!
Here is the promised almost 100% stock deodexed ROM. This build differs from the odexed build in that it is now deodexed, comes pre-rooted and deKnoxed.

This is a stand-alone ROM that can also be used as a base by anyone that would like to use it for their own ROM.

REQUIREMENTS:

You MUST be on a Lollipop bootloader in order for this ROM to work. I recommend flashing the OG1 Stock TAR and then Philz Recovery through Odin prior to flashing the ROM.​

ROM FLASHING:

- Boot to your custom recovery (recommended recovery is Philz Touch v6.41.6).
- Wipe Cache.
- Wipe Dalvik Cache.
- Wipe System and Data (Under "Wipe Data/Factory Reset" and then "Clean to Install a New ROM" in Philz Touch).
- Flash ROM!
- Enjoy!
*Please remember that Lollipop and Deodexed ROM's don't like to play nice with each other and require some time to get acquainted before the ROM will boot. It is not uncommon for the first boot to take between 10 and 20 minutes!
As a side-note I would strongly recommend flashing Tdunham's Debloat tool before running the ROM for the first time. It comes with a TON of bloat (thank you Sprint and Samsung!). You can get the Debloat tool in the attachments on this post: http://forum.xda-developers.com/spr...ent/stock-rom-od3-android-l-deodexed-t3128908​

CHANGELOG:

OG1 Stock Rooted Deodexed v1.1 (Released 11/18/15)
- Changed root method to be consistent with changes in my Mostly Stock OG1 ROM

OG1 Stock Rooted Deodexed v1.0 - Initial Release (Released 10/15/15)
- Deodexed ROM
- Added Root
- Removed Knox​

DOWNLOADS:

Deodexed OG1 ROM
OG1 Stock Restore TAR
Philz Touch Recovery v6.41.6​

Enjoy!

XDA:DevDB Information
SM-G900P OG1 Stock Rooted Deodexed ROM, ROM for the Sprint Samsung Galaxy S 5

Contributors
rwilco12
ROM OS Version: 5.0.x Lollipop

Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-10-15

Created 2015-10-15
Last Updated 2015-10-15

 

[Randy3011]

Yeah, I'm first

I'm first!!! First time ever!!! Downloading now.

Thanks

 

[zuzonline]

This looks interesting, I'm going to check it out.

Sent from my Galaxy s5, using Tapatalk

 

[TagPiper]

Thanks again @rwilco12 for another great contribution to the community!

 

[KueDAWG]

Failing root check

First off, rwilco you are awesome! Thanks so much.

I flashed stock tar, then odined philz recovery and then installed your rom.
Everything runs great but i cant pass root checker. Also tktanium backup wont load because it gets stuck on the verifying supersu and busynox screen. Plz help

 

[rwilco12]

First off, rwilco you are awesome! Thanks so much.

I flashed stock tar, then odined philz recovery and then installed your rom.
Everything runs great but i cant pass root checker. Also tktanium backup wont load because it gets stuck on the verifying supersu and busynox screen. Plz help

I'm not sure why it does that sometimes but when it does your can either dirty flash the ROM or flash SuperSU. That'll get you back on track. Sorry!

 

[KueDAWG]

Where does on get a flashable supersu package for og1? All i have is the odin version and that root isnt sticking either

 

[mholloway]

First off, rwilco you are awesome! Thanks so much.

I flashed stock tar, then odined philz recovery and then installed your rom.
Everything runs great but i cant pass root checker. Also tktanium backup wont load because it gets stuck on the verifying supersu and busynox screen. Plz help

Which slot do you put the stock tar in on odin?never ming got it...PDA.ha-ha....the new odin3 v3.10.7 only has slots BL. AP. CP. CSC. ????

 

[mholloway]

@rwilco12 after odin everything still says oa6 ,not og1
I odin og1 once booted,it was optimizing apps,i didnt let finish.pulled battery on odin recovery,flashed rom

 

[rwilco12]

Where does on get a flashable supersu package for og1? All i have is the odin version and that root isnt sticking either

Flash this in recovery and you'll be good to go. It's Chainfire's SuperSU installer.

http://download.chainfire.eu/supersu

 

[rwilco12]

@rwilco12 after odin everything still says oa6 ,not og1
I odin og1 once booted,it was optimizing apps,i didnt let finish.pulled battery on odin recovery,flashed rom

To have the Odin flash of the stock TAR stick you need to boot to download mode from a complete powered off state. Once you have booted into OG1 then you shut down completely and then boot to download mode again to flash a custom recovery. Once you've done that you can flash the ZIP of this deodexed ROM.

 

[mholloway]

To have the Odin flash of the stock TAR stick you need to boot to download mode from a complete powered off state. Once you have booted into OG1 then you shut down completely and then boot to download mode again to flash a custom recovery. Once you've done that you can flash the ZIP of this deodexed ROM.

OK cool thank you,will try.

 

[mholloway]

To have the Odin flash of the stock TAR stick you need to boot to download mode from a complete powered off state. Once you have booted into OG1 then you shut down completely and then boot to download mode again to flash a custom recovery. Once you've done that you can flash the ZIP of this deodexed ROM.

Firmware worked but now no recovery will install.none.just keep getting fail.

 

[rwilco12]

Firmware worked but now no recovery will install.none.just keep getting fail.

What recovery are you attempting to flash? You should be able to flash a TAR version of the recovery via the PDA slot in Odin. The key is booting to Download mode from a completely powered off state.

 

[mholloway]

What recovery are you attempting to flash? You should be able to flash a TAR version of the recovery via the PDA slot in Odin. The key is booting to Download mode from a completely powered off state.

Philz touch or twrp.either will flash,sometimes philz will just hang..iam stumped,i only get failed.

 

[mholloway]

@rwilco12, any chance of making a rooted stock odin flashable rom?

 

[danbin]

hi

@rwilco12 can you teach me compare different "[ROM][ZIP] Rwilco12's Mostly Stock OG1 v 1.0"

before i've unlock sim :"invalid sim card".then i unlock.i wondering after up this rom,i've unlock again?i fear againt unlock.thanks
my phone SM-G900P

 

[rwilco12]

Philz touch or twrp.either will flash,sometimes philz will just hang..iam stumped,i only get failed.

Shut your phone down, boot to download mode, plug in USB and flash this Philz Touch 6.41.6 One-Click I created. If that doesn't get you a recovery we'll go back to the drawing board.

@rwilco12, any chance of making a rooted stock odin flashable rom?

I wish. Unfortunately Samsung changed a lot of things with the introduction of Knox and although we can make them rooted, Knox somehow wipes root out after boot. Flashing a deKnoxed one-click with the new setup causes bootloops.

To make it more fun with the S6 Samsung made it so the tools we used to make the one-clicks no longer work period. We're seeing what we can do to work around everything but Samsung is making it much more difficult for us to do anything.

 

[mholloway]

Shut your phone down, boot to download mode, plug in USB and flash this Philz Touch 6.41.6 One-Click I created. If that doesn't get you a recovery we'll go back to the drawing board.



I wish. Unfortunately Samsung changed a lot of things with the introduction of Knox and although we can make them rooted, Knox somehow wipes root out after boot. Flashing a deKnoxed one-click with the new setup causes bootloops.

To make it more fun with the S6 Samsung made it so the tools we used to make the one-clicks no longer work period. We're seeing what we can do to work around everything but Samsung is making it much more difficult for us to do anything.

I already tried that,but i will try again after work.maybe the stock rom i downloaded was a bad download,after it booted it was like i dirty flashed over the existing rom.it didnt start phone with having to sign in.not sure if it is supposed too?

 

[mholloway]

Shut your phone down, boot to download mode, plug in USB and flash this Philz Touch 6.41.6 One-Click I created. If that doesn't get you a recovery we'll go back to the drawing board.



I wish. Unfortunately Samsung changed a lot of things with the introduction of Knox and although we can make them rooted, Knox somehow wipes root out after boot. Flashing a deKnoxed one-click with the new setup causes bootloops.

To make it more fun with the S6 Samsung made it so the tools we used to make the one-clicks no longer work period. We're seeing what we can do to work around everything but Samsung is making it much more difficult for us to do anything.

Ok @rwilco12 i tried the one click again at no prevail,i tried odin versions 307, 3-09 , and 3.10.7 ..trying philztouch 6.41.6 one click ,philztouch 6.26.2 , twrp 2.8.4.0 , twrp 2.8.5.0 , ktsoonez_twrp 04-06-2015-tar. Like i said iam stumped.never before had a problem flashing a recovery...????? Options please.lol