[ROMs][TREBLE] OpenKirin AOSP Collection

[OldDroid]

Welcome to Team OpenKirin AOSP Project. Our goal is to provide
a overall stable AOSP experience across all Huawei/Honor phones
utilizing a Kirin SoC and EMUI 8.0 - either updated or shipped.
So far most of the bugs have been fixed and the ROMs are fully usable
as daily driver - and fully Kirin optimized.

This is the device support section for: Mate 10 Lite.
Any bugs found on this device(s) can be reported here, please include proper logs if you encounter any issues.

We support 4 ROMs in total as of now - LineageOS (Unofficial), CarbonROM (Official), ResurrectionRemix OS (Official from Beta 2+), OmniRom
You can find all needed guides/roms on our official website: https://openkirin.net

Requirements: basically full stock EMUI 8.0, with stock recovery/ramdisk

Support: Telegram - https://t.me/joinchat/EeDpi02ekfeJSBeaV4eqOw

XDA:DevDB Information
OpenKirin Treble ROMs, ROM for the Huawei Mate 10

Contributors
OldDroid, XePeleato, rcstar6696, surdu_petru
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: LineageOS, CarbonROM, ResurrectionRemix OS, OmniRom

Version Information
Status: Beta

Created 2018-08-13
Last Updated 2018-08-13

 

[Allan C. E]

Thanks for the ROM, I salute you all for your hard work. I just install LOS on my nova 2i and I have no major issue, very smooth and fast. But I have minor issue such as delay on fingerprint unlock and sometimes app force closing.

 

[OldDroid]

Thanks for the ROM, I salute you all for your hard work. I just install LOS on my nova 2i and I have no major issue, very smooth and fast. But I have minor issue such as delay on fingerprint unlock and sometimes app force closing.

did you factory reset through stock recovery after installation?

Regards

 

[flamedrops]

Resurrection Remix OS Beta 2 is one of my favorite rom, it is stable and you can also use substratum to modify it, also a lot of customization and very smooth. for the camera i have use oneplus camera port for my mate 10 lite. here are some of the screenshots. for the themes like android p i used [substratum] vacuum: P

 

[Globen76]

Were did u get the oneplus camera port

 

[Allan C. E]

did you factory reset through stock recovery after installation?

Regards

Yes sir I do factory reset but not in stock recovery I used TWRP

 

[OldDroid]

Yes sir I do factory reset but not in stock recovery I used TWRP

Install stock recovery and do a factory reset there.
You can find all needed infos on our website.

Regards

 

[Mahady2197]

How can I go back to stock rom

 

[flamedrops]

Were did u get the oneplus camera port

download camera here https://forum.xda-developers.com/oneplus-5/themes/mod-oneplus-camera-jpg-quality-to-100-t3714595 and flash it with magisk, and download the latest oneplus gallery here. https://www.apkmirror.com/apk/oneplus-ltd/oneplus-gallery/oneplus-gallery-2-8-18-release/ after you install the gallery and flash the camera reboot it enjoy

 

[flamedrops]

i love the rr rom but i need to go back to morfuz v3.6 for gpu turbo update.

 

[carlosdys11]

i love the rr rom but i need to go back to morfuz v3.6 for gpu turbo update.

Please let us know how it goes, please, if you can pass screenshots when you install it

 

[flamedrops]

Please let us know how it goes, please, if you can pass screenshots when you install it

ok will update tomorrow

 

[jonytri]

I like your rom but there is a small error that I flash rom on nova2i rne-l22 market vietnam. when checking simcard account by command * 101 # does not display information but exit screen dial, camera Can not save to the library

 

[flamedrops]

I like your rom but there is a small error that I flash rom on nova2i rne-l22 market vietnam. when checking simcard account by command * 101 # does not display information but exit screen dial, camera Can not save to the library

,

mine i install oneplus camera port please see on the previous topic. ty

---------- Post added at 05:38 AM ---------- Previous post was at 05:35 AM ----------

i wish they could port gpu update if possible

 

[OldDroid]

i love the rr rom but i need to go back to morfuz v3.6 for gpu turbo update.

afaik, gpu turbu is the underlying vendor implementation, not really something to do with system aslong as you have a gpu turbo base update running on your device.

Regards

 

[chonnamae]

How about the camera on the RROS Beta 2 update? Is it working without buds now?

---------- Post added at 04:01 PM ---------- Previous post was at 03:54 PM ----------

How about the camera on the RROS Beta 2 update? Is it working without bugs now?

 

[flamedrops]

How about the camera on the RROS Beta 2 update? Is it working without buds now?

---------- Post added at 04:01 PM ---------- Previous post was at 03:54 PM ----------

How about the camera on the RROS Beta 2 update? Is it working without bugs now?

stock camera wont save the picture, emui camera you cant use some of the functions, for now im using oneplus camera port u can see it on page 1 i posted it.

 

[thesingular]

Installed from stock L01C432CUSTC432D1B304-RNE (8.0.0.304) with magisk installed at the time of installing it. Apart from the camera problem the previous poster mentioned, I don't have any problems with the ROM, at least currently. I also didn't have to do anything like installing twrp or patching boot image just to install Magisk again as I only installed the Magisk Manager and it was done. It's so good to finally have RR back, yay!

 

[kax001]

in RROS B2, if u activate unlock with fingerprint after reboot without PIN,
when reboot the phone, u get a principal screen that says " starting android" in a loop and dont show any app o launcher, but config, and status bar work.
if you use the pin, the phone start normal.


CAMERA Huawei : save the pictures if dont use any functions like " boke or aperture" ( idk why,in morfuz3.6 the camera port of p20 work fully. maybe check that rom.)

camera aosp : does not save any saving any picture jeje.

the rom is very smoth and stable, maybe i use for long time.

 

[OldDroid]

in RROS B2, if u activate unlock with fingerprint after reboot without PIN,
when reboot the phone, u get a principal screen that says " starting android" in a loop and dont show any app o launcher, but config, and status bar work.
if you use the pin, the phone start normal.


CAMERA Huawei : save the pictures if dont use any functions like " boke or aperture" ( idk why,in morfuz3.6 the camera port of p20 work fully. maybe check that rom.)

camera aosp : does not save any saving any picture jeje.

the rom is very smoth and stable, maybe i use for long time.

aosp camera: untick/retick storage permission in app permission settings. Known issue because we're shipping 2 camera apps by default.

Regards