[ROMs][TREBLE] OpenKirin AOSP Collection

[OldDroid]

Welcome to Team OpenKirin AOSP Project. Our goal is to provide
a overall stable AOSP experience across all Huawei/Honor phones
utilizing a Kirin SoC and EMUI 8.0 - either updated or shipped.
So far most of the bugs have been fixed and the ROMs are fully usable
as daily driver - and fully Kirin optimized.

This is the device support section for: Huawei P10.
Any bugs found on this device(s) can be reported here, please include proper logs if you encounter any issues.

We support 3 ROMs in total as of now - LineageOS (Unofficial), ResurrectionRemix OS (Official from Beta 2+), OmniRom
You can find all needed guides/roms on our official website: https://openkirin.net

Requirements: basically full stock EMUI 8.0, with stock recovery/ramdisk

Support: Telegram - https://t.me/joinchat/EeDpi02ekfeJSBeaV4eqOw

XDA:DevDB Information
OpenKirin Treble ROMs, ROM for the Huawei P10

Contributors
OldDroid, XePeleato, surdu_petru
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: LineageOS, ResurrectionRemix OS, OmniRom

Version Information
Status: Beta

Created 2018-08-13
Last Updated 2018-08-27

 

[JohnnyMwanza]

do you know anyway in which i could unlock my bootloader?

 

[ej8989]

do you know anyway in which i could unlock my bootloader?

DC Unlocker is the only way to go as Huawei stopped releasing bootloader unlock codes since July 22, 2018.

 

[McEyes]

I installed the Resurrection Remix and Lineage rom on my P10+ (VKY L29) device and both got me the same problem:
When i boot (the boot is successful), Google starts the first configuration. It asks me the language and the visual properties and then i press "next". The screen remains on "Just a second..." for about forever.

I tried format data before and after, tried to install several Treble roms... Everything took me to the same problem.
I tried also to re-install Gapps, but this took me to another problem: the Google First Configuration is totally black.

What should i do?

 

[netmaniack]

I installed the Resurrection Remix and Lineage rom on my P10+ (VKY L29) device and both got me the same problem:
When i boot (the boot is successful), Google starts the first configuration. It asks me the language and the visual properties and then i press "next". The screen remains on "Just a second..." for about forever.

I tried format data before and after, tried to install several Treble roms... Everything took me to the same problem.
I tried also to re-install Gapps, but this took me to another problem: the Google First Configuration is totally black.

What should i do?

Its a know glitch, just reboot and try again.

 

[McEyes]

Its a know glitch, just reboot and try again.

I tried rebooting about 10 times and he always did the same.

Fortunately I figured out how to resolve this hell:
The Google first configuration setup checks the integrity of the ramdisk Partition. I had a custom recovery so obviously the check was not satisfied.
The solution is to flash the stock recovery ramdisk partition (in my case i download The Official update of Huawei p10 Plus and extracted only the ramdisk image).
When i finished the configuration I completed every setup and then I reinstalled the custom recovery again.

 

[ej8989]

Fortunately I figured out how to resolve this hell:
The Google first configuration setup checks the integrity of the ramdisk Partition. I had a custom recovery so obviously the check was not satisfied.
The solution is to flash the stock recovery ramdisk partition (in my case i download The Official update of Huawei p10 Plus and extracted only the ramdisk image).
When i finished the configuration I completed every setup and then I reinstalled the custom recovery again.

If you have properly read the instructions in OpenKirin website, it was clearly stated there that all these ROMs must be installed wirh stock recovery to avoid other issues.

 

[McEyes]

If you have properly read the instructions in OpenKirin website, it was clearly stated there that all these ROMs must be installed wirh stock recovery to avoid other issues.

True, I've read the disclaimer, but if someone, like me, used to install ROMs with the same warning without any problem (like an AOSP rom on my previous phone, which I installed having the TWRP), maybe he/she would think that there is not so much to worry about.

However, I noticed that there isn't a real "guide" on internet about a workaround of the "Just a sec" problem, so I wrote that message also for who needs a help and does not know about the partition check.

 

[McEyes]

I found a bug on the "display" menu.
When i select a theme (light, dark, or the black switch), the system theme doesn't change at all. Tried to reboot, clear cache and data of SystemUI, nothing changed.
I bypassed this theme issue with Substratum. Didn't get any bug/problem with Substratum.

Device: P10 plus VKY-L29
Rom: Resurrection Remix 6.1.0 - Oreo - 2018.08.18

 

[doktor29]

I found a bug on the "display" menu.
When i select a theme (light, dark, or the black switch), the system theme doesn't change at all. Tried to reboot, clear cache and data of SystemUI, nothing changed.
I bypassed this theme issue with Substratum. Didn't get any bug/problem with Substratum.

Device: P10 plus VKY-L29
Rom: Resurrection Remix 6.1.0 - Oreo - 2018.08.18

for me working normal

how to root ? can i flash normal magisk or need special for huawei device?

 

[McEyes]

for me working normal

how to root ? can i flash normal magisk or need special for huawei device?

If you use a normal Huawei EMUI system, there is a special treatment which use a special SuperSu zip file.
Also, you can use a Magisk version, always optimized for Huawei. I found the zip variant in a thread in the P10+ section.

If you have the Treble ROM, which is the main topic of the thread, I did this:
Ensured that there were no setups to do;
Re-flashed TWRP;
Installed the normal Magisk zip from TWRP.

Because is not a EMUI system anymore, you can easily install every mod or patch you wish.

Personal note: I tried install SuperSu with the zip, but the app said "binary occupied". Since it did like that before, with the EMUI system, I gave up and I installed Magisk.
Now it works like a charm.

 

[doktor29]

If you use a normal Huawei EMUI system, there is a special treatment which use a special SuperSu zip file.
Also, you can use a Magisk version, always optimized for Huawei. I found the zip variant in a thread in the P10+ section.

If you have the Treble ROM, which is the main topic of the thread, I did this:
Ensured that there were no setups to do;
Re-flashed TWRP;
Installed the normal Magisk zip from TWRP.

Because is not a EMUI system anymore, you can easily install every mod or patch you wish.

Personal note: I tried install SuperSu with the zip, but the app said "binary occupied". Since it did like that before, with the EMUI system, I gave up and I installed Magisk.
Now it works like a charm.

can you link magisk version?
i try many official but i get info "unable to detect boot image"

 

[McEyes]

can you link magisk version?
i try many official but i get info "unable to detect boot image"

This is the thread:
https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482

It says is good even for P10.
you must flash it with TWRP

 

[doktor29]

This is the thread:
https://forum.xda-developers.com/p10-plus/development/magisk-p10-p10plus-t3752482

It says is good even for P10.
you must flash it with TWRP

what version of recovery You use ? because still wont work, i have 3.1.1 for oreo
you have dencrypted or encrypted data ? i try to decrypt but still in recovery i dont see anything in data partition

 

[antiratar]

Don't use twrp with openkirin rom's. Join the telegram openkirin group and u will get there all the help u need. U need magisk 16.7 or newer. I don't understand why people still use twrp when is stated so many times that using twrp with openkirin rom's usually leed's to bootlop.

 

[doktor29]

any chance to get rid of this annoying notification of SDCARD after reboot ?
rom ressurection remix

---------- Post added at 09:52 PM ---------- Previous post was at 09:33 PM ----------

Don't use twrp with openkirin rom's. Join the telegram openkirin group and u will get there all the help u need. U need magisk 16.7 or newer. I don't understand why people still use twrp when is stated so many times that using twrp with openkirin rom's usually leed's to bootlop.

so how i can flash magisk without twrp ?
for me it works only data partition is not vivible due to encryption

 

[doktor29]

can someone test fingerprint after reboot ?
i have strange issue, after reboot my fingerprint is not recognized anymore :/
if i add new one is ok till next reboot, then again my FP is not recognizing.
and no i dont mean it wont work berofre i put PIN/Passoword after reboot it wont work at all after reboot till i add next one :/

it happen in RR and Carbon, other roms i dont test

 

[ej8989]

can someone test fingerprint after reboot ?
i have strange issue, after reboot my fingerprint is not recognized anymore :/
if i add new one is ok till next reboot, then again my FP is not recognizing.
and no i dont mean it wont work berofre i put PIN/Passoword after reboot it wont work at all after reboot till i add next one :/

it happen in RR and Carbon, other roms i dont test

Are you on stock kernel? Does this happen ALL the time or just random?

so how i can flash magisk without twrp ?

Instructions here: https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280
You only need to use fastboot.

 

[doktor29]

Are you on stock kernel? Does this happen ALL the time or just random?



Instructions here: https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280
You only need to use fastboot.

it happen to me every reboot :/
i have only magisk with stock recovery, from instruction above

 

[McEyes]

what version of recovery You use ? because still wont work, i have 3.1.1 for oreo
you have dencrypted or encrypted data ? i try to decrypt but still in recovery i dont see anything in data partition

I use the FromFutureRom version that is in the thread I linked before. I think is made especially for Huawei P10/P10+
My data partition is still encrypted.

In order to decrypt data you should format the so called "user data", which is the combination of /data and /sdcard. Don't have to say that you will lose everything on your internal archive, so be sure to backup everything. The external SD card will NOT be affected.
In the TWRP you can to this on the menu "format" -> "format data" -> write "yes" and format everything.

---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------

Don't use twrp with openkirin rom's. Join the telegram openkirin group and u will get there all the help u need. U need magisk 16.7 or newer. I don't understand why people still use twrp when is stated so many times that using twrp with openkirin rom's usually leed's to bootlop.

You are absolutely right, but I said that you can install TWRP or any custom rom AFTER the Treble Rom installation. I am now on Resurrection Remix Treble rom, with a TWRP recovery installed after the rom flash and everything is fine since the first boot.