[ROMS][UG007/Imito MX1/2][RK3066] Post em here!

Search This thread
By:
Advanced…
bulgareli

bulgareli

Senior Member
Jan 20, 2012
148
29
Brazil
ruthless10001 said:
well it was way easier than i thought.. :)
everything you need is inside the finless rom folder which you extracted from the zip file you downloaded from the freaktab..just open the read me file and fallow the instructions.. but if you have mx2 like me you can skip the putting the device into "flash mode" parts because all you need to do is stick a paperclip into the hole near hdmi and connect the device to your pc while holding it down..if you need more than that just ask..
Click to expand...
Click to collapse

Thanks for the help. I tried to do exactly the way that is described in the instructions, but at the time to flash the ROM it shows the message: "ERROR: Test device failed".

Everything else looks to be correct, the Flash Tool indicate "Found RKAndroid Loader Rock USB".

What's going wrong?

Tks!

Enviado de meu GT-N8000 usando o Tapatalk 2
 
A

ar_156

Senior Member
Mar 3, 2007
150
5
does it work on UG008?

I know this custom firmware works on UG007, does it work on UG008 ???

UG008 has the same RK3066 CPU and Mali Quadcore, but has external WiFi antenna, internal RJ45 ethernet port and power button.
 
digitalhigh

digitalhigh

Inactive Recognized Developer
Dec 28, 2010
3,626
11,934
Milwaukee, WI
www.facebook.com
Dvalin21 said:
Is there anyone still paying attention to this thread? Anyone willing to take the software and modify it?
Click to expand...
Click to collapse

Well, I've asked for the 808s quad-core, 5.1 passthrough enabled bigger brother for Christmas this year. If I get that, you may see me breaking down and doing some ROM work for both. I've just been busy with my miui port for the one right now.

Sent from my M7WLS using xda app-developers app
 
  • Like
Reactions: wjstone and GerManiac
jfrm

jfrm

Senior Member
Feb 1, 2006
393
54
Marbella
New Firmware

As Imito Mx1/Mx2 are similar to Rikomagic MK802IIIS, the oficial firmware recently released for that devices is working perfectly fine with Imitos.

I have flashed the latest 4.2.2 firmware update on my Imito MX2 and everything is working.

-Bluetooth finaly connecting.
-Wifi is the best I have had in my device. Very stable and double the range I got with the last rom I have (finless 2.0.)
-Full HD (1080) and HD screen mode selectable from settings.
-HDMI 5.1 Audio and passthrough options in settings.
-Miracast enabled.

Download Rikomagic MK802IIIS8G(B) Android 4.2 Software(131107) from: http://www.rikomagic.com/en/download/download_18_1.html

There is a YouTube video to explain the flash proccess http://youtu.be/mK8IBX9gqG0

Firmware is factory rooted, so flash it, install SuperSu from Play Store and there you go.

I have got the info from Freaktab forum members mystguy and dfgas. So, no credits for me, just to them.

Regards,
 
Last edited:
A

ahhl

Senior Member
Jul 23, 2007
1,074
114
I have problem with wifi, not able to turn on wifi after flashing the rom. no backuo was made before that.

Sent from my GT-N7000 using Tapatalk
 
jfrm

jfrm

Senior Member
Feb 1, 2006
393
54
Marbella
ahhl said:
I have problem with wifi, not able to turn on wifi after flashing the rom. no backuo was made before that.

Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse

No problem with wifi here.

As I said im my post, I am getting the strongest signall I have see in my I-Mito MX2.

Maybe you should try to reflash.
 
digitalhigh

digitalhigh

Inactive Recognized Developer
Dec 28, 2010
3,626
11,934
Milwaukee, WI
www.facebook.com
jfrm said:
As Imito Mx1/Mx2 are similar to Rikomagic MK802IIIS, the oficial firmware recently released for that devices is working perfectly fine with Imitos.

I have flashed the latest 4.2.2 firmware update on my Imito MX2 and everything is working.

-Bluetooth finaly connecting.
-Wifi is the best I have had in my device. Very stable and double the range I got with the last rom I have (finless 2.0.)
-Full HD (1080) and HD screen mode selectable from settings.
-HDMI 5.1 Audio and passthrough options in settings.
-Miracast enabled.

Download Rikomagic MK802IIIS8G(B) Android 4.2 Software(131107) from: http://www.rikomagic.com/en/download/download_18_1.html

There is a YouTube video to explain the flash proccess http://youtu.be/mK8IBX9gqG0

Firmware is factory rooted, so flash it, install SuperSu from Play Store and there you go.

I have got the info from Freaktab forum members mystguy and dfgas. So, no credits for me, just to them.

Regards,
Click to expand...
Click to collapse

Will update the op with this when I get a chance, thanks.

Sent from my HTC One using xda app-developers app
 
Crake

Crake

Senior Member
Sep 29, 2007
183
14
Maia
Huawei P30 Pro
Huawei P40 Pro
jfrm said:
As Imito Mx1/Mx2 are similar to Rikomagic MK802IIIS, the oficial firmware recently released for that devices is working perfectly fine with Imitos.

I have flashed the latest 4.2.2 firmware update on my Imito MX2 and everything is working.

-Bluetooth finaly connecting.
-Wifi is the best I have had in my device. Very stable and double the range I got with the last rom I have (finless 2.0.)
-Full HD (1080) and HD screen mode selectable from settings.
-HDMI 5.1 Audio and passthrough options in settings.
-Miracast enabled.

Download Rikomagic MK802IIIS8G(B) Android 4.2 Software(131107) from: http://www.rikomagic.com/en/download/download_18_1.html

There is a YouTube video to explain the flash proccess http://youtu.be/mK8IBX9gqG0

Firmware is factory rooted, so flash it, install SuperSu from Play Store and there you go.

I have got the info from Freaktab forum members mystguy and dfgas. So, no credits for me, just to them.

Regards,
Click to expand...
Click to collapse

Sorry about my question, but i have a CWM Recovery installed, so how can i update it?

Thanks.
 
jfrm

jfrm

Senior Member
Feb 1, 2006
393
54
Marbella
It is not a cwm zip but a propietary format rom file, so you wll need to use the included flasher and follow the instructions. I supposed you will keep your recovery but not sure....
 
H

hkhuder

Member
Nov 19, 2008
31
3
Android KitKat 4.4.2

Here is a partially working Kitkat rom which works for UG007

Everything works except WiFi network.

If you have a USB Ethernet adapter then go ahead and try it.

note that you need to make sure what WiFi chip you have MTK or AP6210

My UG007 had the MTK chip and I can confirm WiFi is not working.

To flash this rom you will need to boot the device into bootloader mode which can be done in two ways.
If you have root on current rom you can install an application that can reboot into bootloader mode otherwise you will need to open the device an short the two pins of the missing reset button.


http://allminipc.com/forum/viewtopic.php?f=3&t=1191
 
Last edited:
You must log in or register to reply here.

Similar threads

digitalhigh
[TUTORIAL] How to Manually ROOT your RK3066 Device (UG007, iMitio MX1/2, mk808?)
Replies
42
Views
114K
A
Abuhuraira007
sancho1234
iMito MX1 Dual Core TV BOX RK3066 1.6GHz Cortex A9 1GB RAM 8G ROM HDMI
Replies
166
Views
88K
DamageSource
DamageSource
S
Firmware Upgrade Guide For RK3188 RK3288 RK3368 Devices
Replies
91
Views
198K
HeavyChevyShit
HeavyChevyShit
P
Cx919 (rk3188)
Replies
150
Views
118K
C
canip
M
RK3066 (MK802 III) Flashtool and Android 4.4.2
Replies
15
Views
31K
T
theeflash1

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 7
    digitalhigh
    digitalhigh
    Hello there! It's me again.

    I've noticed a very distinct lack of threads that start with [ROM] in this here section, and I hope to help change that. I recently purchased a UG007 Android-on-a-stick, which I have discovered has a lot of hardware similarities between other devices, thanks particularly to wide prevalence of the RK3600 chipset.

    My goal here is twofold. One is to provide a consolidated place for others interested in developing for these devices to find resources. The other is to explore the depth of the similarities between devices, discuss various flashing methods and tools, and overall get in touch with other people who may own these things who have other knowledge and skills that I may not possess.

    First off, here are a few downloads for various ROMS I've found across the web. I did not make any of these - I'm just linking to the sources I found.

    STOCK UG007 Firmware - STOCK 12/01/2012 ROM, completely unmodified. Good to see the differences between the pre-rooted and OG versions. Original source unknown, my apologies.

    FengHuang pre-rooted for UG007 - Pre-rooted, "market fix", "xbmc supported", fixes some wifi negotiation issues. Jellybean 4.1.1. Verified works. Install by placing in root of SD card and inserting into device.

    Finless Bob's 1.5 for iMito mx1/2 - VERIFIED WORKING on UG007 as well. Pre-rooted, debloated, higher LCD density, other tweaks. See original thread for full details. Install instructions in OP as well.


    And that's all I have for now. I'll do some more digging in a while, see if I can't find more stuff. I found a thread elsewhere that has resources for building kernels for RK3066 - I'll try to post that as well. If you know of more ROMS, please, post them here and I'll add to the OP.
    View
    4
    A
    Artimis
    There is a much easier way to do all this directly from the device without having to hook the stick up to a computer or install any drivers.

    1) Download the FengHuang v4 ROM from the link in the first post (I can provide an alternate link if it is still down). You can do this directly from the stick -- no PC needed. Edit - Alternate Link to download here: http://www.mediafire.com/?avoui37gr7taxsd

    2) Using a file explorer (either built-in or ES File Explorer from the market), move the zip you just downloaded from the Downloads folder (/sdcard/Downloads) to the root of the internal sdcard (/sdcard) and rename it "update.zip".

    3) You will now be automatically prompted to install the ROM.

    4) Congrats, you are now rooted.

    5) Download CWM from this link: http://androtab.info/clockworkmod/rockchip/rk3066/ . Do it directly from the device.

    6) Using a file explorer, move the downloaded zip from the Downloads folder (/sdcard/Downloads) to the root of the sdcard (/sdcard) and rename it "update.zip"

    7) You will now be automatically prompted to install the zip (CWM)

    8) Congrats, you are now rooted with CWM recovery installed.

    You can boot into recovery using terminal by entering:
    su
    reboot recovery

    From there you can make nandroid backups so you can saftely move to different ROMs. There are CWM comptible version of Finless 1.5 and 1.7 around so that you can install these ROMs if you want without having to go through the PC-based tools (etc.). Personally, I found running FengHuang together with the 1080p Kernel from Finless 1.5 to perform a bit better.
    View
    2
    digitalhigh
    digitalhigh
    Dvalin21 said:
    Is there anyone still paying attention to this thread? Anyone willing to take the software and modify it?
    Click to expand...
    Click to collapse

    Well, I've asked for the 808s quad-core, 5.1 passthrough enabled bigger brother for Christmas this year. If I get that, you may see me breaking down and doing some ROM work for both. I've just been busy with my miui port for the one right now.

    Sent from my M7WLS using xda app-developers app
    View
    2
    A
    Artimis
    Finless 1.7 is up now. Comes in two flavors:
    http://www.freaktab.com/showthread.php?3931-NEW-iMito-MX1-2-Finless-ROM-1-7-(beta-is-over)


    Edit:
    Some other things people may find useful (maybe it can be added to the OP):
    1) CWM recovery for the UG007:
    http://androtab.info/clockworkmod/rockchip/rk3066/

    It is ridiculously easy to install (just place the update.zip at the root of the internal SD card and you will be prompted automatically).

    2) I installed Finless 1.7a last night using the 1080p option and there is a significant difference. It appears to be true 1080p. However, I was not able to get wifi working unless I used the kernel from 1.5. Just a note to others that might run into issues.

    3) I created a CWM flashable zip that will install Finless 1.7a 1080p + 1.5 1080 kernel straight through recovery so you don't need to hookup the device to a computer, install drivers, put into flashable mode, etc. I'd be happy to post it for anyone here to use but I am going to reach out to Finless Bob first and make sure he is ok with that.....don't want to step on anyone's toes. If not, I can post a tutorial on how to create the flashable zip. It's pretty easy and can be done straight through the device with ES File Explorer.
    View
    1
    fr0d0#2
    fr0d0#2
    There are earlier releases of finless/Bob's roms, plus factory roms all for the MX 1/2 so for both devices. Note finless roms all start At v1.4
    View

New posts