[ROMS][UG007/Imito MX1/2][RK3066] Post em here!

[optimummind]

Here is a partially working Kitkat rom which works for UG007

Everything works except WiFi network.

If you have a USB Ethernet adapter then go ahead and try it.

note that you need to make sure what WiFi chip you have MTK or AP6210

My UG007 had the MTK chip and I can confirm WiFi is not working.

To flash this rom you will need to boot the device into bootloader mode which can be done in two ways.
If you have root on current rom you can install an application that can reboot into bootloader mode otherwise you will need to open the device an short the two pins of the missing reset button.


http://allminipc.com/forum/viewtopic.php?f=3&t=1191

Do you know of any Kitkat ROM for the UG007-II that has working WiFi?

Sent from my SPH-L720

 

[hkhuder]

Do you know of any Kitkat ROM for the UG007-II that has working WiFi?

Sent from my SPH-L720

I think it is a kernel problem and I did search for a working kernel but couldn't find anything yet.

but this rom is very fast and it is worth it to buy a usb hub and network adapter to use it until someone fixes the WiFi problem.

 

[optimummind]

Here is a partially working Kitkat rom which works for UG007

Everything works except WiFi network.

If you have a USB Ethernet adapter then go ahead and try it.

note that you need to make sure what WiFi chip you have MTK or AP6210

My UG007 had the MTK chip and I can confirm WiFi is not working.

To flash this rom you will need to boot the device into bootloader mode which can be done in two ways.
If you have root on current rom you can install an application that can reboot into bootloader mode otherwise you will need to open the device an short the two pins of the missing reset button.


http://allminipc.com/forum/viewtopic.php?f=3&t=1191

Both the Rikomagic 4.2.2 file and the 4.4 Kitkat file for the UG007-II flashed successfully on my UG007-II (dual-core, MTK wifi) but I had no WiFi working.

So I ended up going back to the official UG007-II 4.2.2 jellybean update (with MTK WiFi support). I don't know why my WiFi worked with the 4.2.2 file but not the 4.4 file, since both files are stated to be for a MTK WiFi device.

There is a new rom dated on march on the same link

RKM MK802IIIS8G(B) Software (140312)
Optimized WIFI performance

http://www.rikomagic.com/en/download/download_18_1.html

Sent from my Nexus 5 using Tapatalk

 

[ironfisted]

I think it is a kernel problem and I did search for a working kernel but couldn't find anything yet.

but this rom is very fast and it is worth it to buy a usb hub and network adapter to use it until someone fixes the WiFi problem.

how much faster than the stock or rkm is this 4.4 rom?

 

[optimummind]

how much faster than the stock or rkm is this 4.4 rom?

Honestly, not a big difference. I'm personally wanting Kitkat for more stability rather than speed. Sometimes my UG007-II will freeze up while watching videos on BS Player and I'm hoping for more stability.

Sent from my Nexus 5 using Tapatalk

 

[surroundedbydrones]

Fully Working 4.4.2 KitKat (MTK Wifi active)

Honestly, not a big difference. I'm personally wanting Kitkat for more stability rather than speed. Sometimes my UG007-II will freeze up while watching videos on BS Player and I'm hoping for more stability.

Sent from my Nexus 5 using Tapatalk

This is a fully functioning 4.4.2 KitKat ROM, not the same as the one posted in this thread.

Wifi works, same as bluetooth, ART functions as well. Antutu scores 14.5K with an OC kernel, 1K below my older MK808B on 4.2 but considering KitKat is still 'maturing' all seems well, especially for an aging (and cheap) device.

Download: https://mega.co.nz/#!6cJkWDDY!-VT74eadfRToDfeNjzmgnZgyoBNi4kqkTYcjPm_KVn4

ROM info: http://www.freaktab.com/showthread.php?14765-Kit-Kat-4-4-2-RK3066-(Fully-Working)

 

[optimummind]

This is a fully functioning 4.4.2 KitKat ROM, not the same as the one posted in this thread.

Wifi works, same as bluetooth, ART functions as well. Antutu scores 14.5K with an OC kernel, 1K below my older MK808B on 4.2 but considering KitKat is still 'maturing' all seems well, especially for an aging (and cheap) device.

Download: https://mega.co.nz/#!6cJkWDDY!-VT74eadfRToDfeNjzmgnZgyoBNi4kqkTYcjPm_KVn4

ROM info: http://www.freaktab.com/showthread.php?14765-Kit-Kat-4-4-2-RK3066-(Fully-Working)

Cool find~! Thx~! I'm gonna give this a shot tomorrow. ?

Sent from my Nexus 5 using Tapatalk

 

[optimummind]

This is a fully functioning 4.4.2 KitKat ROM, not the same as the one posted in this thread.

Wifi works, same as bluetooth, ART functions as well. Antutu scores 14.5K with an OC kernel, 1K below my older MK808B on 4.2 but considering KitKat is still 'maturing' all seems well, especially for an aging (and cheap) device.

Download: https://mega.co.nz/#!6cJkWDDY!-VT74eadfRToDfeNjzmgnZgyoBNi4kqkTYcjPm_KVn4

ROM info: http://www.freaktab.com/showthread.php?14765-Kit-Kat-4-4-2-RK3066-(Fully-Working)

The ROM flashed just fine and booted up on my UG007-II but there are some serious issues. My UG007-II will flicker the TV screen and turn it black when I toggle the WiFi on and try to enter the WiFi password. It also happens after a while when I just move the pointer around using my bluetooth keyboard with trackapad. These are issues I never had on the previous 4.2.2 ROM.

I thought it was the power supply but it happens whether it's powered by my laptop or through the Samsung 5V, 2 amp wall charger.

Sent from my Nexus 5 using Tapatalk

 

[surroundedbydrones]

The ROM flashed just fine and booted up on my UG007-II but there are some serious issues. My UG007-II will flicker the TV screen and turn it black when I toggle the WiFi on and try to enter the WiFi password. It also happens after a while when I just move the pointer around using my bluetooth keyboard with trackapad. These are issues I never had on the previous 4.2.2 ROM.

I thought it was the power supply but it happens whether it's powered by my laptop or through the Samsung 5V, 2 amp wall charger.

Sent from my Nexus 5 using Tapatalk

Sorry to hear that.That does indeed sound like power supply issues. I would try to flash again and make sure to erase IDB/nand flash (put the device in mask rom mode) before re-flashing. Depending on the ROM(s) you had installed previously, there can be conflicts from lingering elements, especially manifesting in troublesome wireless function.

This is the first report of this issue, one other user reported issues with a 1a power supply which I'm sure is underpowered. I use 3.5a power supplies on my tv sticks.

 

[optimummind]

Sorry to hear that.That does indeed sound like power supply issues. I would try to flash again and make sure to erase IDB/nand flash (put the device in mask rom mode) before re-flashing. Depending on the ROM(s) you had installed previously, there can be conflicts from lingering elements, especially manifesting in troublesome wireless function.

This is the first report of this issue, one other user reported issues with a 1a power supply which I'm sure is underpowered. I use 3.5a power supplies on my tv sticks.

How do I enter mask ROM mode? When I flashed to 4.4.2, I used RKBatchTool v1.7. Also, before flashing, should I erase internal, cache, and Dalvik within CWM first?

Sent from my SPH-L720

 

[surroundedbydrones]

How do I enter mask ROM mode? When I flashed to 4.4.2, I used RKBatchTool v1.7. Also, before flashing, should I erase internal, cache, and Dalvik within CWM first?

Sent from my SPH-L720

Use Rockchip batch Tool 2.1 and click 'erase flash' to enter mask ROM mode before flashing firmware, to eliminate the possibility of firmware corruption

https://mega.co.nz/#!fJgADI6S!RBael74MPhhLcLawy8rSQ2GXTGdqmXKqKSv_U903xGA - Batch Tool 2.1

 

[chenrp]

any imito mx2 android 4.4.2 with wifi ap6210 rom out there?

 

[brunobelo]

Problems ug007

Well, I have my ug007 since 2012, I used it a lot and really love it, it was cheap (65 usd at the time) and did a great job for me.

But now I'm having a lot of reboots when I'm using netflix and xbmc. I've tried all possible roms, finless, neotv are the ones who works best. But I'm still having reboots when I'm using this 2 apps. I've flashed 3 roms yesterday, and the 3 gave me the same problem. Should I trash my device and go buy a new one? Is there a way to see what's happening? I think it's video acceleration related, since the reboots never happen when I'm using chrome or playing emulators...

What can I do to discover the root of this problem?

Thanks a lot!

 

[xoff83]

check your power supply...

Well, I have my ug007 since 2012, I used it a lot and really love it, it was cheap (65 usd at the time) and did a great job for me.

But now I'm having a lot of reboots when I'm using netflix and xbmc. I've tried all possible roms, finless, neotv are the ones who works best. But I'm still having reboots when I'm using this 2 apps. I've flashed 3 roms yesterday, and the 3 gave me the same problem. Should I trash my device and go buy a new one? Is there a way to see what's happening? I think it's video acceleration related, since the reboots never happen when I'm using chrome or playing emulators...

What can I do to discover the root of this problem?

Thanks a lot!

Hi,
This can come from the fact the cpu is over loaded, and the power delivered on pick is not big enougth... in short try it with an other power adapter which is able to deliver more mili watts ( but with the same voltage).

That's a quite chip solution to try...

 

[petermit]

Please help! I'm petty much ready to give up.
I purchased an RK3066 HDMI stick about a week ago and i received it with kitkat 4.4.2. Everything was working properly except a Bluetooth gamepad i own which was not able to connect with the stick. So i figured i should try some of the other roms.
That's when i completely lost my Wi-Fi and Bluetooth connectivity. After some roms including finless, or stock ugoos ug007 with mtk and broadcom chipsets and some others, i contacted the seller and he provided me with the link of the original firmware. I downloaded it and flashed it successfully only to find out that Wi-Fi and Bluetooth still won't work. I can actually recognize that it is the stock rom, same apps, no shutdown button, background etc, but no Wi-Fi or Bluetooth.
This is the stick i bought: http://www.aliexpress.com/item/On-S...-Player-1080P-Dual-Core-Cortex/693069531.html
And this the stock rom: http://www.ibestec.com/Download/Download6.html

Thank you in advance.

 

[jfrm]

Use Rockchip batch Tool 2.1 and click 'erase flash' to enter mask ROM mode before flashing firmware, to eliminate the possibility of firmware corruption

https://mega.co.nz/#!fJgADI6S!RBael7...XKqKSv_U903xGA - Batch Tool 2.1

I have the same problem as you a few times and this always solve it.

Credits to and link by "surroundedbydrones", just three or four post before yours....

 

[rfve]

hi all ,
how to install the firmware with a SD card ?
freaktab.com /forum/tv-player-support/rk3066-devices/imito-mx1-mx2-etc/15316-kit-kat-4-4-2-rk3066-fully-working?_=1452065704311

I've tried various methods but
i can't install with my computer. (didn't recognize the USB Device , when I press Recovery button )
Win 10 64 bit , usb 3,0


(I tried many times to install the software. but AndroidTool 2.1 not working.

i am press erase button , it gives the error message " match device type failed , stop running
i am press uprgadebutton , it gives the error message " match device type failed , stop running )