[Root][4.4.3 Update 2][LB/UB][Dual SIM]

chauhanjayc

Senior Member
Feb 22, 2011
1,475
1,455
0
Ahmedabad - India
ok in the new update every thing wod be the same just use new kernal in place of 4.4.3 kernal from zip

Download new kernal here (From Second Update)http://d-h.st/mxn

if any one doesnt succeed plz do back up and after that do a clean install of new update
then after try this method
it will work
have fun !!!!


thanks to @aliaz

Something that might help others.
Updated phone to new update.
Started rooting as per guide on page1.
After flashing 4.4.2, easy root failed to root the device.
Multiple attempts but no success.
Flashed 4.4.3 update and booted system. Realised I has Super User already installed. Uninstalled SU.
Flashed 4.4.2 again and this time easy root rooted the phone.
Flashed 4.4.3 and bingo! SU was installed, updated binaries and phone is now rooted.



Hi all

i have seen many posts where people are searching for root but not finding proper end.

i am a noob so i will try and make this as simple as possible.

first just relax and follow this simple steps its very very very easy

what you need
complete data back up
Flash tool download here : https://unrestrict.li/flashtool
if you face any issue over there then you can download it via torrent
link is http://kickass.to/usearch/flashtool-0.9.18.2-windows.exe/
Require files here http://d-h.st/iXN
easy root tool kit here http://forum.xda-developers.com/showthread.php?t=2784900
a cup of coffee
at least 50% battery charged phone
USB debugging mode enabled on 4.4.3 firmware as we will need it so do it first then go ahead

now follow this easy steps
1. install flash tool in C drive
2. extract downloaded rar in to C:\Flashtool\firmwares
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone
4. now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone
5. now as soon as you get notification press vol -(down) key and connect phone and wait till flash completes
6. now disconnect your phone, close flash tool
7. turn on phone there wod be nothing will stuck at blank screen dont warry reonnect your phone to pc
8. now open easy root tool kit,and hit install.bat root your phone if stuck at any place close window again hit install.bat, disconnect phone when you see phone is rooted
9.now read this carefully

your phone is rooted but to flash 4.4.3 kernal back we beed to turn off the phone as we have to connect phone in flash mode to flash ftf 4.4.3
so to turn off phone in this condition(bank screen) follow this trick
press vol +(UP) and power together and wait
1st you will fell single vibret keep holding after some few sec you will fell three times vibration now release the keys as your phone is turned off.

10. now open flash tool now again hit flash button and this time select 4.4.3.ftf press ok and connect your phone when it says to connect by pressing vol - (down) key on phone.
11. as soon as its done disconnect your phone and turn it on
12. now install supersu and hit update binary
13. TADAAAA you have rooted phone


hope this helped you
if you face any challenge plz plz plz report back

thank you..

 
Last edited:

nanomet

Senior Member
Feb 16, 2009
185
64
0
thanks for sharing this, it works as I did the most same way except making everything packed greatly as what you have done

the best of this was you made all files in one, extremely good for ones do not have 4.4.2 and 4.4.3 ftf files in hands

I guess most of guys do not want to try flash-power off-flash...
 
  • Like
Reactions: chauhanjayc

Rajiv Patki

Member
Jan 6, 2011
25
3
0
Kharagpur
At step 4 you only flash the 4.4.2 kernel, (deselect everything else) not the entire .ftf or you'll end up with 4.4.2 on your phone. Similarly, at step 10 you only need to flash the 4.4.3 kernel, not the entire image.

You forgot to mention that an unlocked bootloader is required to use flashtool.
developer.sonymobile.com/unlockbootloader

Also, if you unlock bootloader you lose warranty so backup TA partition before you proceed to keep warranty.
 
Last edited:

chauhanjayc

Senior Member
Feb 22, 2011
1,475
1,455
0
Ahmedabad - India
At step 4 you only flash the 4.4.2 kernel, (deselect everything else) not the entire .ftf or you'll end up with 4.4.2 on your phone. Similarly, at step 10 you only need to flash the 4.4.3 kernel, not the entire image.

You forgot to mention that an unlocked bootloader is required to use flashtool.
developer.sonymobile.com/unlockbootloader

Also, if you unlock bootloader you lose warranty so backup TA partition before you proceed to keep warranty.


HI RAJIV

failed to understand what you are trying to explain but i can say

i have made 4.4.2 and 4.4.3 kernal ftf so there is nothing to select or deselect
+
here i haven't explained abt unlocking bootloader so there is no need to worn abt DRM key

correct me if i am wrong in any line above

thank you
 

chauhanjayc

Senior Member
Feb 22, 2011
1,475
1,455
0
Ahmedabad - India
Without unlocking your bootloader you cannot use flashtool, I suppose.
i have locked bootloader bro:cowboy:
i do love bravia engine and other sony stuffs :victory:
let me tell you one simple thing in one line
if you wona flash a custom kernal you need unlocked bootloader other then that you can do any thing with locked bootloader
like rooting
flashing custom rom
flashing mod
changing system partition
and a lot more
 
  • Like
Reactions: inaldocc

Rajiv Patki

Member
Jan 6, 2011
25
3
0
Kharagpur
i have locked bootloader bro:cowboy:
i do love bravia engine and other sony stuffs :victory:
let me tell you one simple thing in one line
if you wona flash a custom kernal you need unlocked bootloader other then that you can do any thing with locked bootloader
like rooting
flashing custom rom
flashing mod
changing system partition
and a lot more
:laugh:
 

jychow74

Senior Member
Aug 17, 2010
51
6
0
Kuala Lumpur
Hi Chauhanjayc
Thanks for your effort. I am new at flashtool, please help.

in your steps,
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone

What I did:
1. I turned off the phone.
2. I held down vol- key and connect phone to PC using the USB cable.
3. Nothing happen.

What have I done wrong?

I have Sony PC Companion, Flashtool installed. Please kindly explain. Thanks.
 

chauhanjayc

Senior Member
Feb 22, 2011
1,475
1,455
0
Ahmedabad - India
Hi Chauhanjayc
Thanks for your effort. I am new at flashtool, please help.

in your steps,
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone

What I did:
1. I turned off the phone.
2. I held down vol- key and connect phone to PC using the USB cable.
3. Nothing happen.

What have I done wrong?

I have Sony PC Companion, Flashtool installed. Please kindly explain. Thanks.
you need to manually install flash drivers

to do so open flash tool folder in C drive and there wod be a folder named drivers open and install our device drivers
 
Last edited:

wouldxx

Member
Sep 11, 2014
18
1
0
Hi all

i have seen many posts where people are searching for root but not finding proper end.

i am a noob so i will try and make this as simple as possible.

first just relax and follow this simple steps its very very very easy

what you need
complete data back up
Flash tool download here : https://unrestrict.li/flashtool
Require files here http://d-h.st/iXN
easy root tool kit here http://forum.xda-developers.com/showthread.php?t=2784900
a cup of coffee
at least 50% battery charged phone
USB debugging mode enabled on 4.4.3 firmware as we will need it so do it first then go ahead

now follow this easy steps
1. install flash tool in C drive
2. extract downloaded rar in to C:\Flashtool\firmwares
3. turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install req, drivers as soon as its done disconnect your phone
4. now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone
5. now as soon as you get notification press vol -(down) key and connect phone and wait till flash completes
6. now disconnect your phone, close flash tool
7. turn on phone there wod be nothing will stuck at blank screen dont warry reonnect your phone to pc
8. now open easy root tool kit,and hit install.bat root your phone if stuck at any place close window again hit install.bat, disconnect phone when you see phone is rooted
9.now read this carefully

your phone is rooted but to flash 4.4.3 kernal back we beed to turn off the phone as we have to connect phone in flash mode to flash ftf 4.4.3
so to turn off phone in this condition(bank screen) follow this trick
press vol +(UP) and power together and wait
1st you will fell single vibret keep holding after some few sec you will fell three times vibration now release the keys as your phone is turned off.

10. now open flash tool now again hit flash button and this time select 4.4.3.ftf press ok and connect your phone when it says to connect by pressing vol - (down) key on phone.
11. as soon as its done disconnect your phone and turn it on
12. now install supersu and hit update binary
13. TADAAAA you have rooted phone


hope this helped you
if you face any challenge plz plz plz report back

thank you..

instalation of supersu failed to update binaries