Was this useful and you were satisfied with the outcome...?


  • Total voters
    149
Search This thread

davidsha

Member
Feb 8, 2010
23
1
ECG and BP show only inside SMH though...

Yep, I talk about the SMH app, inside, I show screen capture

The inside SMH not show BP functionality
 

Attachments

  • Screenshot_20210302-215503_Samsung Health Monitor.jpg
    Screenshot_20210302-215503_Samsung Health Monitor.jpg
    109.8 KB · Views: 49

WizardXDA1234

Member
Jun 17, 2015
7
1
Which version of SHM have you got? Try clearing SHM data and reconfiguring it again...

I have the 183 variant installed on my phone. I cleared the SHM data but to no avail. It's strange that there are no mentions of the word BP or Blood Pressure on SHM. Like even in the About section of SHM, there are only some details for ECG. Would it make any difference if I used the hard way to install the ECG on the watch as well?
 

Dante63

Senior Member
Nov 1, 2015
1,661
1,455
27
the Clouds
Yep, I talk about the SMH app, inside, I show screen capture

The inside SMH not show BP functionality
I have the 183 variant installed on my phone. I cleared the SHM data but to no avail. It's strange that there are no mentions of the word BP or Blood Pressure on SHM. Like even in the About section of SHM, there are only some details for ECG. Would it make any difference if I used the hard way to install the ECG on the watch as well?
You both can't see BP... do me a favor, disconnect watch, switch Bluetooth off, clear data of SHM...
Set up SHM without watch, if you still don't see the BP, then I must've missed something in age restrictions fir BP because age should be 22+... how old are you setting up the birthday...?
 

WizardXDA1234

Member
Jun 17, 2015
7
1
You both can't see BP... do me a favor, disconnect watch, switch Bluetooth off, clear data of SHM...
Set up SHM without watch, if you still don't see the BP, then I must've missed something in age restrictions fir BP because age should be 22+... how old are you setting up the birthday...?

Just tried it as you said. I tried both 18 and 25 but still having the same issues. No mentions of BP in the app. Maybe the disabling of the age restriction is ignoring some code pertaining to BP?
 

Dante63

Senior Member
Nov 1, 2015
1,661
1,455
27
the Clouds
Just tried it as you said. I tried both 18 and 25 but still having the same issues. No mentions of BP in the app. Maybe the disabling of the age restriction is ignoring some code pertaining to BP?
Age restriction is lowered not disabled...
You tried without the watch I hope because without a watch you should see this at age of 16 and above
Screenshot_20210303-041249_Samsung Health Monitor.jpg
And this at age less than 16
Screenshot_20210303-041347_Samsung Health Monitor.jpg
 

WizardXDA1234

Member
Jun 17, 2015
7
1
Age restriction is lowered not disabled...
You tried without the watch I hope because without a watch you should see this at age of 16 and above
View attachment 5238201
And this at age less than 16
View attachment 5238203

Here are the two screenshots when I try below 16 and above 16 age. The wording is a little different under no compatible watch found. No mention of blood pressure in the error message on SHM.
 

Attachments

  • Screenshot_20210302-202350.jpg
    Screenshot_20210302-202350.jpg
    391.6 KB · Views: 20
  • Screenshot_20210302-202424.jpg
    Screenshot_20210302-202424.jpg
    381.9 KB · Views: 20
Last edited:

davidsha

Member
Feb 8, 2010
23
1
You both can't see BP... do me a favor, disconnect watch, switch Bluetooth off, clear data of SHM...
Set up SHM without watch, if you still don't see the BP, then I must've missed something in age restrictions fir BP because age should be 22+... how old are you setting up the birthday...?

Hello friend, I follow the steps and set up SHM without watch and the app not show de BP functionality, I have a 34 years old, and set mi correct birth day,

This is that show the app after setup
 

Attachments

  • Screenshot_20210303-001510_Samsung Health Monitor.jpg
    Screenshot_20210303-001510_Samsung Health Monitor.jpg
    248.8 KB · Views: 20

keppada

New member
Oct 2, 2011
2
0
Hey,

Thanks for doing this! For some reason i cant install the Samsung TPK installer apk or the official installer apks on my oneplus 7t pro. I have allowed unknown sources on drive and chrome and the SMH installed and opened just fine but cant get the apk to stick that i use to push on phone.

It keeps saying "do you eant to install even i the app is not from galaxy store" i choose yes and the question keeps popping up again or again. Or then it installs but says "its an unknown source the app will be uninstalled from your phone". How do i fix this?
 

Dante63

Senior Member
Nov 1, 2015
1,661
1,455
27
the Clouds
Hello friend, I follow the steps and set up SHM without watch and the app not show de BP functionality, I have a 34 years old, and set mi correct birth day,

This is that show the app after setup
Use 175, I will work on 181 & 193 and patch them to work...
Hey,

Thanks for doing this! For some reason i cant install the Samsung TPK installer apk or the official installer apks on my oneplus 7t pro. I have allowed unknown sources on drive and chrome and the SMH installed and opened just fine but cant get the apk to stick that i use to push on phone.

It keeps saying "do you eant to install even i the app is not from galaxy store" i choose yes and the question keeps popping up again or again. Or then it installs but says "its an unknown source the app will be uninstalled from your phone". How do i fix this?
Your watch is rejecting the apps, go into Samsung wearable and then to about watch and allow installation from unknown sources... hopefully that works for you... if it doesn't, you need to sign your own BP and ECG and install it either sdb or tpk installer...
 

wasser79

Member
Sep 26, 2020
35
4
Hey,

Thanks for doing this! For some reason i cant install the Samsung TPK installer apk or the official installer apks on my oneplus 7t pro. I have allowed unknown sources on drive and chrome and the SMH installed and opened just fine but cant get the apk to stick that i use to push on phone.

It keeps saying "do you eant to install even i the app is not from galaxy store" i choose yes and the question keeps popping up again or again. Or then it installs but says "its an unknown source the app will be uninstalled from your phone". How do i fix this?
There is such a problem with phones not from Samsung, I had this with Huawei, I will have to go a little hard way, create my own certificate through Tizen Studio and send the file with my certificate through the same program to the clock.
 

keppada

New member
Oct 2, 2011
2
0
Use 175, I will work on 181 & 193 and patch them to work...

Your watch is rejecting the apps, go into Samsung wearable and then to about watch and allow installation from unknown sources... hopefully that works for you... if it doesn't, you need to sign your own BP and ECG and install it either sdb or tpk installer...


The problem is i cant instal sdb or tpk installer on my one plus even with the proper permissions
 

wasser79

Member
Sep 26, 2020
35
4
There is also the latest working version for the phone with a cut out region check and with the ability to synchronize with SHealt (only ECG). Kind of like multilingual.
 

Dante63

Senior Member
Nov 1, 2015
1,661
1,455
27
the Clouds
The problem is i cant instal sdb or tpk installer on my one plus even with the proper permissions
Can you explain what you've done so far so I can trace the problem for you, I have a feeling you're installing the tpk installer without placing the tpk inside or sdb install unsigned tpk...
There is also the latest working version for the phone with a cut out region check and with the ability to synchronize with SHealt (only ECG). Kind of like multilingual.
It is already done, the SHM here is multilingual, ECG is in SH since 175, everyone is requesting BP and I'm working on the possibility of making it work...
The thread is up to date with most of the restrictions removed and lowered... thanks for sharing the Russian version again... that version doesn't work on my phone for some reason... but it doesn't matter because mine works just fine...
 
  • Like
Reactions: trveller72

wasser79

Member
Sep 26, 2020
35
4
Samsung Note 20 Ultra, mentioned at the first post... why?
Interestingly, I have a galaxy s20 + and everything works, the only thing is not to put on top of the old application only through uninstalling and reinstalling.
I read your first post, apparently you have a rooted phone and there is a specificity in editing the application.
Although no, the root should not be a hindrance, like the check is turned off. Strange, of course.
 
Last edited:

Dante63

Senior Member
Nov 1, 2015
1,661
1,455
27
the Clouds
Interestingly, I have a galaxy s20 + and everything works, the only thing is not to put on top of the old application only through uninstalling and reinstalling.
I read your first post, apparently you have a rooted phone and there is a specificity in editing the application.
Although no, the root should not be a hindrance, like the check is turned off. Strange, of course.
I thought the same but really, it doesn't matter, I grabbed original one, Modified it, if it runs on my phone and bluestacks then it will run on many devices, that's how I maintain things and test...
 
  • Like
Reactions: wasser79

wasser79

Member
Sep 26, 2020
35
4
On XXXX (Mod Edit: Mention of warez site removed) they made an updated version of SHM 1.1.0.39 for the watch to be installed from the phone (only Samsung)
 
Last edited by a moderator:

Top Liked Posts

  • 1
    Are trying to sync the old BP or new BP, if you have developer On and the health analytics set to DEV and not working, do you have the latest Samsung Health (google drive is the latest that worked)?
    Thanks a ton @Dante63, I Uninstaller the existing SH and then installed the .apk from your drive. Everything is now working flawlessly.

    Thanks a lot for all your efforts and prompt support.
    Also Thanks to @rehannali , For indicating that only JDK 15 does the trick.

    Looking forward to your continued support to help is get all the features we paid for!!!
    1
    1
    Thank you @Dante63 you are amazing I have BP/ECG and the sync to SH.
    1
    I noticed after XDA update that links broke since I'm using XDA mobile to edit my thread sometimes, thank you for the note, I'll fix that link, hopefully it doesn't break again...

    If the apk is installing and you don't see any transfer happening between your watch and phone then you need to check for Samsung accessory service, that service should be running and not put to sleep, it comes with the galaxy wearables, its task is transferring any files from phone to the watch... if you don't have it, install it from the drive... normal case scenario is it installs and you're asked to allow installation of unknown apps or installation failed...
    Quick update:
    I changed my username - having my email address as username was rather not so cool. 😁

    Samsung accessory service was installed and also running.

    Solution:
    The problem was actually inside the "Galaxy Wearable"-App.
    If you start the app -> tap on the watch right on top above the Notifications -> there is a toggle switch "Install unknown apps". This has to be set to "On" - then the widgets are getting pushed to the watch after installation of the .apk as shown in the video. :)

    Once again - thanks to everybody who is supporting in this forum - only the "together" makes us strong. 😎
    1
    if you read some post above... Java 15 is recommended
    It's great! I did it when downgrade java to 15, thank you so much for your help
  • 5
    DANTE, you've created these tools and replied to this many messages to help people??? You're awesome man thanks so much, I'm gonna buy you a coffee ❤️
    3
    @Vuska thanks to you...
    Screenshot_20210408-151600_Logcat Reader.jpg

    This is the cause of BP sync failure...
    I will try today disabling this security check and syncing should work between SHM and SH...
    3
    Just a quick update for what I have been doing whenever I get a free time from work,

    I still didn't do anything about translating the tpks because after a report that SHM actually push data to SH for BP, I was investing heavily the SHM app to see where the feature is, as I am sure that feature is most likely locked by country restriction...
    Samsung have distributed restrictions all over the classes, I wish if they just put it all in one place so I can modify at ease lol... *sigh* stay tuned...
    3
    Thanks @Dante63 - I followed the alternate (long) path and got BP installed successfully. I did run into a couple of issues that others have also pointed out, which you may want to add to your instructions:

    1) JDK path needs to be added to the Path system environment variables, otherwise fit2installer fails to sign the TPKs. That Path addition looks like C:\Users\myuserID\AppData\Local\.package-manager\jdk\bin
    2) APK Easy Tool installation should be added to Exclusions in Windows Security or any other antivirus. APK compilation was not working for me until this was done,.

    Again thanks for putting this all together and letting us enable functionality that we paid for!
    No words to thank you guys. Every thing went fine after correcting the JAVA bath on system environment variables.

    I just check the widgets on watch and it's there. I'm so happy :giggle:

    Many Thanks to you 😘
    I'm glad it worked and thanks for sharing details that would help others :giggle:
    3
    Talk about taking the scenic route! haha, thanks for the help guys.

    I had to move all the files as instructed by dante in the reply up above and then I had to google how to set a path system environment variable, found that and copy/pasted the path of my jdk. Had a funky readout but it worked. Then I just followed the normal instructions to decompile/compile it.
  • 69
    Hello Everyone,
    I hope you all are fine...


    ~~~ FEATURES, BUGS & FUTURE WORKS~~~
    • FEATURES: 175 (no root detection, No Force update to the latest version, English language Only), 181, 183 & 189 (Multilanguage, no root detection, no country restriction, no device restriction (works on all devices, however, some Huawei devices are facing issues), age limit lowered from 22 to 16, no lock screen restriction, No Force update to latest version) for phone, as for the watch, SHM multilanguage 1.1.0043, BP and ECG Standalone English Only...
    • BUGS: Nothing that I know so far...
    • FUTURE WORKS: investigate the possibility of having Standalone BP and ECG Multilangual Support and I am open to suggestions 😊 ...
    • BP SYNC between SHM and SH: There is an Entire Section that explains it in detail, don't miss it if you want this to work...

    ~~~ ECG + BP - Easy Way & Alternative Way - Tutorial - XDA - Dante63 ~~~

    If you can't see the YouTube video, visit the YouTube link: https://youtu.be/zAclEJMDrhI

    ~~~ Exception in thread "main" ~~~
    This is a very common error for many members, and I will share what members shared, thanks to them:
    Use JDK 15 to fix this issue. This process doesn't work on JDK 16 for now. It gives you this error.
    If JDK 15 didn't fix it, try other suggestions below:
    Thanks everybody.
    It was indeed a problem with the path on the JDK.
    It must to be added to the windows path.
    Everything works wonderfully.
    Big thanks Dante.


    View attachment 5254249
    Thanks @Dante63 - I followed the alternate (long) path and got BP installed successfully. I did run into a couple of issues that others have also pointed out, which you may want to add to your instructions:

    1) JDK path needs to be added to the Path system environment variables, otherwise fit2installer fails to sign the TPKs. That Path addition looks like C:\Users\myuserID\AppData\Local\.package-manager\jdk\bin
    2) APK Easy Tool installation should be added to Exclusions in Windows Security or any other antivirus. APK compilation was not working for me until this was done,.

    Again thanks for putting this all together and letting us enable functionality that we paid for!
    This is what I used by the way, in case it helps anyone else, for setting the path system.

    PATH Environment can be fixed according to Java website guide like:
    Alternatively, a member managed to make it work by doing the following:
    finally found the solution:

    you have to replace the "sdk.info" and "sdk.version"-files within the "Fit2Installer\tizen\tizen-studio"-folder with copied ones from the tizen-studio-folder under C:\tizen-studio
    then copy all the files from the subfolder tools\ide to the corrospondent folders under C:\Fit2Installer\tizen\tizen-studio

    then run the sign.bat ... there will be some strange lines, but at the end it runs through.

    hope it helps!
    It is not neccesorcly it would work as some tried the method and failed to make it work, so remember, in this case, google is your best friend lol and he will be of a great help if these solutions did not work (hopefully they work though), And more to that, I will share this link which I found interesting for those who want to read more about different the "main" exceptions:

    ~~~ FILES and Description ~~~
    Here is the link to the files I am using:
    Google Drive - Samsung Health Monitor No Root, Country, Device, Update Detection + ECG-BP-installer / BP-installer / ECG-installer

    • MinSDK24-SHM1.1.0.175.root.detection.removed.dante63.apk -> "installs Samsung Health Monitor @caravana Mod with no root detection, most stable version..."
    • MinSDK24-SHM1.1.0.181.root.detection.country.restriction.removed.dante63.apk -> "installs Official Samsung Health Monitor, Modified by Me, removed device restriction, country restriction and root detection, lowered age restriction from 22 to 16..."
    • MinSDK24-SHM1.1.0.183.root.detection.country.restriction.removed.dante63.apk -> "updated version of 181, improved ECG..."
    • MinSDK24-SHM1.1.0.189.root.detection.country.restriction.removed.dante63.apk -> "updated version of 183, optimizations done..."
    • Samsung Accessory Service 3.1.94 (min SDK15).apk -> "This app should be installed with galaxy wearables but if you don't have it, then install it, this app transfer files from the phone and push them to the watch..."
    • Samsung Health 6.16.0.047 (min SDK26).apk ->"Latest Samsung Health that worked for BP sync, if your current Samsung Health doesn't sync BP even after switching to DEV with developer mode on then install this..."
    • Original SMH ("Official from Galaxy Store, unmodified"):
      • ORIGINAL.SHM1.1.0.181
      • ORIGINAL.SHM1.1.0.183
      • ORIGINAL.SHM1.1.0.189
    • Original Installers:
        • Samsung-ECG-BP-Retailmode-installer-SMH-1.1.0023.apk -> "installs on your phone and pushes ECG and BP widgets to your watch after allowing installation from unknown sources for your watch, it might fail to install if you have one of the widgets already installed..."
        • Samsung-ECG-BP-Official-installer-SMH-1.1.0037 -> "installs on your phone and pushes the official SMH app to your watch containing ECG and BP widgets, however, it is controlled by Samsung, BP or ECG might not visible till your country is approved, use alternative way in this case to get the missing widget"
        • Samsung-ECG-BP-Official-installer-SMH-1.1.0039 -> "updated version of 37, enhanced ECG and improved UI"
        [*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*][*]
      • Samsung-ECG-BP-Official-installer-SMH-1.1.0043 -> "installs on your phone and pushes the official SMH app to your watch containing ECG and BP widgets, more improvements on 1.1.0039, however, it is controlled by Samsung, BP or ECG might not visible till your country is approved, use alternative way in this case to get the missing widget"
      • Samsung.ECG.installer.apk -> "installs on the phone and pushes ECG widget to your watch..."
      • Samsung.BP.installer.apk -> "installs on the phone and pushes BP widget to your watch..."
    • Edit TPK and install:
      • Original TPKs - Samsung Originally Signed TPKs
        • BP.tpk -> "Blood pressure watch widget..."
        • ECG.tpk -> "ElectroCardioGram watch widget"
        • shm37_international.tpk -> "Samsung Health Monitor version 1.1.0037, rolled-out as a system app on watches when updated"
        • shm39_international.tpk -> "bugs fixed in version 1.1.0037"
        • shm43_international.wgt -> "bugs fixed in version 1.1.0039"
      • Modified Unsigned TPKs - Modified Samsung TPKs, need to be signed in order to work...
        • Unsigned_SBP.tpk -> "Blood pressure watch widget..."
        • Unsigned_SECG.tpk -> "ElectroCardioGram watch widget"
      • Samsung.TPK.installer.apk -> "installs on the phone and pushes whatever tpk widget to your watch..."
      • READ ME.txt -> "information about how to use the TPK installer"

    Note: If you install the widgets from the APK and you changed your mind and no longer wish to use them, uninstall the apk and the widgets will be uninstalled as well, in other words, the widgets are affected by the apk on your phone...

    ~~~ What You Need For Alternative Way To Sign TPKs~~~
    Java RE: https://www.java.com/en/download/
    Java JDK 15 (recommended): https://www.oracle.com/java/technologies/javase-jdk15-downloads.html
    Tizen Studio: https://developer.tizen.org/development/tizen-studio/download
    Fit2Installer: https://forum.xda-developers.com/attachments/fit2installer-zip.4218341/
    APK Easy Tool: XDA - Apk Easy Tool

    ~~~ ENABLING BP SYNC BETWEEN SHM & SH ~~~
    SHM has security checks related to signature which breaks the BP sync between SHM and SH and I struggled to disable that check... Thanks to xda member @juljoe2021, he suggested and advised the use of developer mode in Samsung Health makes it work, I have tested and seen in the logs no security checks were called and the BP syncs between SHM and SH with no issues... The steps are easy to enable the developer mode on Samsung Health:
    InShot_20210411_200934172.jpgInShot_20210411_201048449.jpgInShot_20210411_232542732.jpgInShot_20210411_232636295.jpgInShot_20210411_201440606.jpgScreenshot_20210412-021338_Samsung Health.jpg
    Instructions in words, you will open Samsung health and go to settings then about, tap on the version till features and developers are visible. You will go inside the features and expand the "Health Analytics" set it to "DEV", then expand "DataPlatform" and turn On the "Developer Mode", when you hit back, Samsung Health will ask you to force stop the application and take you to the app info screen, you will force stop and clear the cache, this will allow Samsung Health to reinitiate a connection without security checks for SHM to sync BP with it...

    I have also uploaded the latest Samsung Health that worked for me but it should work with previous Samsung Health (latest version on the galaxy store is different in every country)...

    Important Note: you need to switch to DEV and turn On the Developer Mode whenever you update Samsung Health, the update reset those settings back to default...

    ~~~ Special Thanks ~~~
    Thanks to the following members for sharing their solutions about the Java "main" exception error solution: @FckSamsung, @little_blaine, @uoY_redruM and @gogega ...

    BIG THANKS TO @evildog1 for the APK Easy Tool and @LeJay for the Fit2Installer that I found on his Thread...

    Thanks to @caravana for sharing version 175, found at Samsung Health Monitor - 1.1.0.175.mod4.Caravana and on XDA Samsung Health Monitor v1.1.0.167 by @JonGarrett is how I found the link...

    Thanks to @adfree for providing me SMH 1.1.0.181, SHM watch 1.1.0037 and SHM watch 1.1.0039...
    Thanks to @vadu71 for providing me the updated version of SMH 183...
    Big thanks to member @l0nax for the great catch of finding the device detection and lowering age restriction found in here...

    Thanks to @jmdomini as despite BP was hidden and inaccessible, he was able to use the BP by calling the activity through a third-party app which tells me that the restrictions were only view related and not functionality, his findings helped me dig in the right place and fix SHM...

    Thanks to @warpjavier for sharing his thread
    https://forum.xda-developers.com/t/working-bp-tpk-for-non-samsung-phones.4184729/
    I have followed his steps and generated unsigned TPKs, you just need to sign it...
    After signing it with Tizen studio, you either push it sdb or you can use the TPK installer which you decompile, place the tpk in assets and compile it again...

    Thanks for this Guide by @xxstd (download 1 to 3, don't use 4 or 5, use mine and proceed with the rest) for how to sign TPKs

    Thanks to Mr. @m2carbine as on the journey of trying to make this work, thanks to him I found the root cause why BP failed to install... The picture below shows SMH installed on the watch:
    20210110_012035.png

    ~~~ ABOUT THE ORIGINAL SMH ~~~
    According to Samsung, The Samsung Health Monitor app requires a Galaxy Watch Active2 or Galaxy Watch3 and Android version 7.0 and above...

    From Version 181 and onwards, Samsung device detection added, country restriction and spoof location detection, the following countries were listed in the country restriction checking, I believe if you live in those countries, SMH should Work, otherwise, it wouldn't, SMH checks your GeoLocation, Sim Card, and Device CSC (why so complex, it's just BP & ECG):
    • EU_CSC: <-- FULL SUPPORT
      1. AT
      2. BE
      3. BG
      4. CZ
      5. DE
      6. DK
      7. EE
      8. ES
      9. FI
      10. FR
      11. GR
      12. HR
      13. HU
      14. IE
      15. IT
      16. LT
      17. LV
      18. NL
      19. PL
      20. PT
      21. RO
      22. SE
      23. SI
      24. SK
      25. CY
      26. LU
      27. MT
      28. GB
      29. CH
      30. IS
      31. NO
      32. LI
      33. TR
      34. RS
    • EU_MNC: <-- PARTIAL SUPPORT?
      1. AT
      2. BE
      3. BG
      4. CH
      5. CZ
      6. DE
      7. DK
      8. EE
      9. ES
      10. FI
      11. FR
      12. GB
      13. GR
      14. HR
      15. HU
      16. IE
      17. IS
      18. IT
      19. LT
      20. LV
      21. NL
      22. NO
      23. PL
      24. PT
      25. RO
      26. SE
      27. SI
      28. SK
    • Ungrouped:
      1. KR <-- NO ACTION
      2. US <-- BP DISABLED
      3. BR <-- NO ACTION
      4. CL <-- NO ACTION
      5. AE <-- NO ACTION
      6. ID <-- NO ACTION
    SMH 189 listed 3 more countries CY, RU and HK which add restrictions to them aside of the language support...

    The original app will work only if you are not rooted, have no busybox and have none of the following apps installed,
    in addition to living in the countries above:
    • com.noshufou.android.su
    • com.noshufou.android.su.elite
    • eu.chainfire.supersu
    • com.koushikdutta.superuser
    • com.thirdparty.superuser
    • com.yellowes.su
    • com.devadvance.rootcloak
    • com.devadvance.rootcloakplus
    • de.robv.android.xposed.installer
    • com.saurik.substrate
    • com.zachspong.temprootremovejb
    • com.amphoras.hidemyroot
    • com.amphoras.hidemyrootadfree
    • com.formyhm.hiderootPremium
    • com.formyhm.hideroot
    • com.koushikdutta.rommanager
    • com.koushikdutta.rommanager.license
    • com.dimonvideo.luckypatcher
    • com.chelpus.lackypatch
    • com.ramdroid.appquarantine
    • com.ramdroid.appquarantinepro
    How do I know all that you ask?
    Well, I have decompiled the apk and removed the detection method, and recompiled it...
    So if you want to keep using the original mod apk or perhaps the original Samsung Health Monitor when it's released, make sure you have none of what I stated and you should be fine...

    ~~~ Don't forget to ~~~
    Bump into the thread when a newer version is released and I will update it...
    or Bump into the thread if you need an older version, share it and I will remove the root detection...
    BUT KEEP IN MIND, I WILL NOT MODIFY ANY OTHER APKS, SO PLEASE DO NOT BUMP FOR THAT...

    Now, it doesn't make sense 🤦‍♂️ why Samsung considers the blood pressure and ecg very critical that it needs lockscreen to be medium and no root :rolleyes: but oh well...

    I am using my Samsung Galaxy Note 20 Ultra Rooted with my Galaxy Watch 3...
    Also, I have tested these apps on BlueStacks, rooted, different types of devices to ensure device and update detection is removed and that the application is running, but please, if you encounter any issues, @ me for a faster response and I will do my best...


    ~~~ Finally ~~~
    Don't forget to smash the (y)THANKS (y)
    PS. if you are super happy and want to thank me, a cup of coffee will do great 😊
    12
    Changelog,
    Latest Changes:

    --- 11th April 2021 - Thanks to @juljoe2021 for the tip of using Developer mode on Samsung Health, it allows to bypass signature checks and Sync BP between Samsung Health and Samsung Health monitor, also thanks to @adfree, I uploaded the SHM version 43 for the watch and added the installer which has 3 countries support (CY, RU and HK) and some minor optimization, I also uploaded the latest Samsung Health that I used for the BP sync in SHM...

    --- 3rd April 2021 - Successfully Modified and uploaded SHM1.1.0.189 - still investigating what has been added aside from 3 countries (CY, RU and HK)...
    --- 28th March 2021 - I have gathered different solutions of members for the annoying Exception in thread "main" JAVA problem in a section so people can use one of the them to fix it and proceed signing the tpks...
    --- 14th March 2021 - I forgot to post about the SHM 39 apk installer, Thanks to @adfree, I believe it patches the SHM 37 for bugs in the interface...
    --- 10th March 2021 - the issue of hidden ECG and hidden BP was still shown for few users and now I am confident to say with more patches, I think SHM 181 & 183 is at its best, thanks to @jmdomini as despite BP was hidden, he was able to use the BP by calling the activity which tells me that the restrictions was view related and not functionality...
    --- 8th March 2021 - very few users reported that SHM still hides BP or ECG showing either "The blood pressure features require a Galaxy Watch Active 2 or later to work" or "The ECG features require a Galaxy Watch Active 2 or later to work", so I dag very deep hoping to find what I missed and I believe I found it & I patched the logic, now you should be able to see "The blood pressure and ECG features require a Galaxy Watch Active 2 or later to work." And to be able to use both BP and ECG on the app...
    --- 3rd March 2021 - Organized the Thread, Patched 181 and 183, removed BP restriction for USA, Removed lock screen requirement, changed the message of age restriction from 22 to 16 and applied the check logic...
    --- 1st March 2021 - Updated SHM1.1.0.181 & SHM1.1.0.183 removing device restriction and lowered age restriction from 22 to 16, special thanks to @l0nax, I also removed version detection, it shouldn't ask you to update to the latest version anymore...
    --- 11th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.183 root detection & country restriction removed...
    --- 10th Feb 2021 - Successfully Modified and uploaded SHM1.1.0.181 root detection & country restriction removed + Added official SMH tpk installer for the watch...
    --- 14th Jan 2021 - Uploaded a tutorial video, hope it helps...
    --- 13th Jan 2021 - Fixed the Modified TPKs - the current ones are working 100% as they have been tested, please sign it and enjoy using it...
    --- 10th Jan 2021 - Added Modified BP.tpk, ECG.tpk to be signed, those who fail to install any widget, check for SMH on your watch, if it's installed, it will prevent you from pushing original widgets, sign the modified widgets and push them either sdb or the tpk installer I added and it will work (Note, you need to add the tpk inside the TPKinstaller, decompile, add it and recompile and sign)...
    --- 5th Jan 2021 - Added BP.tpk, ECG.tpk and TPK installer apk for editing and pushing if original tpk fail to install, check the Alternative way in the post...
    --- 24th Dec 2020 - Added individual widget installers, BP standalone & ECG standalone, if the watch has one of the widgets already, both widgets installer will fail to install...
    --- 20th Dec 2020 - Added photos in post #3...
    --- 14th Dec 2020 - Removed root detection from latest Samsung Health Monitor Mod (1.1.0.175.mod4) by @caravana
    5
    DANTE, you've created these tools and replied to this many messages to help people??? You're awesome man thanks so much, I'm gonna buy you a coffee ❤️
    5
    I need to rewrite my thread soon so it wouldn't be confusing to everyone when I update the MOD and thread...

    So today I am very happy to say that things look very promising now with the latest SMH and I may have thanked member @l0nax a lot, might look like I am spamming him LOL, I also liked the idea of lowering the age restriction, so I lowered it from 22 to 16 years old...

    The device restriction that I missed was why some of you were struggling to run the latest SMH and lately in my tests for all versions, I saw that Samsung wants to force the latest version only... *tsk tsk tsk* Not Anymore, I removed the version check, so now all version 175, 181 and 183 should work fine, just in 175 you may notice the start screen acting up (no device found, found device, no device found and so on) so just continue and ignore it, and inside the app you should see your watch connected already...

    Enjoy 😊 ... That is a wonderful feeling that I have... feel like victory lol...

    Oh and one last thing:
    Many of you are talking about the possibility of fixing the BP sync between SMH and SH which I am not sure...
    Dear @adfree, I hope you are fine, as I remember, you have played a lot with the BP and tried to push it to SH, have you seen any versions that actually sync the BP?
    I don't mind looking into the SMH, I believe I saw something about UUID or something in SMH but I was too tired to focus...
    So if you know something about it, let me know and I'll see what I can do to push it...
    5
    Hello Dante, today too I received an update OTA for the Samsung Health app on the GW3 and installed it. Since I last charged the SW3 battery, about 22 hours ago, I now have left an 27% and the Samsung Health app has consumed 25% of the total battery.
    I don't think it is related to my previous installation of SHM 183 and to discard it and continue with my troubleshooting, I ask you if you have any suggestions in this regard? Should I reset the SW3?
    Thanks!
    Yeah, Samsung Health does consume a lot on the watch, SHM has nothing to do with it, it can be seen in galaxy wearables, about watch then battery, Samsung Health ha many running services, such as Heart Beat, Steps, Auto-workout detect, stress, sleeping time, stairs and so on...
    I managed to install the modified Health Monitor app 1.1.0.183 and it works.
    I tried to install both the ECG as well as the BP installers but only the ECG managed to install.
    I don't have the Health Monitor app on my watch, according to your video tutorial.
    did you try the alternative way?
    Thanks for your help!
    I have not either SHM installed on watch.
    I will try...
    Let me know if you need help...
    Yeah, I know, I'm going to alternative way but only ecg is installed, not BP.. Don't know why.
    Perhaps you are trying to install the unsigned bp... after signing the BP, go to folder install me... I made that mistake and thought something is wrong till I realized I have been using the same unsigned bp inside the sign me folder...
    I have a watch with a pre-installed SHM like yours. On a nearby branch, a respected I0nax has developed an alternative solution. To be installed as a separate application on the watch without affecting the installed one. Works normally. Yesterday he rebuilt the latest 0.39 version.
    p.s Installation via signature
    First, Credit him by adding @ and typing his name like @l0nax ...
    Second, mention the thread link...
    He modified the SHM for the phone which is brilliant how he caught the device restriction that I missed
    but patched SHM for watch...?
    It's only renaming package name just like I did with the BP and ECG, nothing is patched...
    When a tpk is modified, they will need to sign it because Samsung Signature is broken...
    Now on the watch, they'll see 2 SHMs and multiple widgets...
    Having 2 SHM services, luckily they don't run in the background, would drain the battery...
    Kindly asking you from now and onwards, you can suggest, you can assist
    BUT I do not wish to see you posting anything on your own to:
    Claim it as your own or list it to others randomly or whatever that is you are doing...
    I have worked hard to create this simple guide, I dedicated my time,
    I have listed Thanks to members for their work and effort and listed their guides as well...
    I do not wish to see you posting files from other threads and outside XDA community...
    Read the 📚 XDA Developers Forum Rules 📚 since you are a new member...
    Show some respect when you are on other threads and credit others properly...
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone