Yeah, I know, I'm going to alternative way but only ecg is installed, not BP.. Don't know why.
Last edited:
Yeah, I know, I'm going to alternative way but only ecg is installed, not BP.. Don't know why.
Yeah, Samsung Health does consume a lot on the watch, SHM has nothing to do with it, it can be seen in galaxy wearables, about watch then battery, Samsung Health ha many running services, such as Heart Beat, Steps, Auto-workout detect, stress, sleeping time, stairs and so on...Hello Dante, today too I received an update OTA for the Samsung Health app on the GW3 and installed it. Since I last charged the SW3 battery, about 22 hours ago, I now have left an 27% and the Samsung Health app has consumed 25% of the total battery.
I don't think it is related to my previous installation of SHM 183 and to discard it and continue with my troubleshooting, I ask you if you have any suggestions in this regard? Should I reset the SW3?
Thanks!
did you try the alternative way?I managed to install the modified Health Monitor app 1.1.0.183 and it works.
I tried to install both the ECG as well as the BP installers but only the ECG managed to install.
I don't have the Health Monitor app on my watch, according to your video tutorial.
Let me know if you need help...Thanks for your help!
I have not either SHM installed on watch.
I will try...
Perhaps you are trying to install the unsigned bp... after signing the BP, go to folder install me... I made that mistake and thought something is wrong till I realized I have been using the same unsigned bp inside the sign me folder...Yeah, I know, I'm going to alternative way but only ecg is installed, not BP.. Don't know why.
First, Credit him by adding @ and typing his name like @l0nax ...I have a watch with a pre-installed SHM like yours. On a nearby branch, a respected I0nax has developed an alternative solution. To be installed as a separate application on the watch without affecting the installed one. Works normally. Yesterday he rebuilt the latest 0.39 version.
p.s Installation via signature
Excuse me if I upset you with something, it was an attempt at a banal help no more. Henceforth I will be dumb like a fish. Once again I apologize!Yeah, Samsung Health does consume a lot on the watch, SHM has nothing to do with it, it can be seen in galaxy wearables, about watch then battery, Samsung Health ha many running services, such as Heart Beat, Steps, Auto-workout detect, stress, sleeping time, stairs and so on...
did you try the alternative way?
Let me know if you need help...
Perhaps you are trying to install the unsigned bp... after signing the BP, go to folder install me... I made that mistake and thought something is wrong till I realized I have been using the same unsigned bp inside the sign me folder...
First, Credit him by adding @ and typing his name like @l0nax ...
Second, mention the thread link...
He modified the SHM for the phone which is brilliant how he caught the device restriction that I missed
but patched SHM for watch...?
It's only renaming package name just like I did with the BP and ECG, nothing is patched...
When a tpk is modified, they will need to sign it because Samsung Signature is broken...
Now on the watch, they'll see 2 SHMs and multiple widgets...
Having 2 SHM services, luckily they don't run in the background, would drain the battery...
Kindly asking you from now and onwards, you can suggest, you can assist
BUT I do not wish to see you posting anything on your own to:
Claim it as your own or list it to others randomly or whatever that is you are doing...
I have worked hard to create this simple guide, I dedicated my time,
I have listed Thanks to members for their work and effort and listed their guides as well...
I do not wish to see you posting files from other threads and outside XDA community...
Read theXDA Developers Forum Rules
since you are a new member...
Show some respect when you are on other threads and credit others properly...
Perhaps you are trying to install the unsigned bp... after signing the BP, go to folder install me... I made that mistake and thought something is wrong till I realized I have been using the same unsigned bp inside the sign me folder...
The use of Java is mainly for jar files... having them installed shouldn't cause any troubles at all and you can always uninstall them when you're done... as for fit2installer, run as it is and not as admin and it will work with no errors thrown... an xda member requested if I can help I these processes and I did remotely connect to his device, installed everything and created certificates, signed it for him and installed as well...Actually, all the Java stuff is not necessary. And things get even messier when you install these Java JDK since Tizen Softwares won't start and the install.bat file in Fit2Installer will fail to sign tpk because of a ClassNotFoundException
Ok inside fit2installer there is a folder called sing me, place the tpks you want to sign and place the certificates from Samsung inside cert... run sign.bat... open install me folder and you'll find the files have been signed and ready to use...Sorry, but where to find that folder?
and it's asking me for pass..The use of Java is mainly for jar files... having them installed shouldn't cause any troubles at all and you can always uninstall them when you're done... as for fit2installer, run as it is and not as admin and it will work with no errors thrown... an xda member requested if I can help I these processes and I did remotely connect to his device, installed everything and created certificates, signed it for him and installed as well...
Ok inside fit2installer there is a folder called sing me, place the tpks you want to sign and place the certificates from Samsung inside cert... run sign.bat... open install me folder and you'll find the files have been signed and ready to use...
At 23:15 in the video you say put "your tpk" in asset folder. Which tpk is that exactly?
I GOT IT!!!! THANKS
Pass? As in password? If it's the password, type the password you created the certificate with in certificate manager...and it's asking me for pass..
Which watch and firmware do you have?I tried version 181 & 183 several times and it never added blood pressure. I could only get blood pressure in SHM with 175 for some reason. FYI I did the long version to get widgets. I don't know if I'm installing wrong apk or what.
With 5.5.0.2 I've got the same problem, I can insall only ECG apk. BP installation starts but widget is not visible in the watch, and in the app healt monitor only ECG is available. Any fix for this problem? maybe a different apk for the last samsung update? Thank you.5.5.0.1
Everything is there & working for me with the .175 version apkWith 5.5.0.2 I've got the same problem, I can insall only ECG apk. BP installation starts but widget is not visible in the watch, and in the app healt monitor only ECG is available. Any fix for this problem? maybe a different apk for the last samsung update? Thank you.
Could you share your apks (ecg, bp and app)? Have you got Samsung Active 2 with Tizen 5.5.0.2? Thank youEverything is there & working for me with the .175 version apk
I also had a similar issue and when I installed the Samsung Health version from the Google drive and did the developer mode actions then it worked. My Samsung Health was an older version 16.15.xxxx though my store was saying it was the latest one available for me. The SH version on the goógle drive of Dante is 16.16xxIt's 2 things, Developer mode on and switching to DEV
Should work with all devices as mentioned in the description as long you meet the minimum android version and have the latest Samsung watches (galaxy 3 or active 2)...Hi, I want to confirm if this method works with non samsung phone? I'm using OnePlus 6T.
Phone changes doesn't affect watch, the watch has its own restrictions based on CSC for the SpO2...Just a question, upon enabling developer option in SHM there is showing as well Blood Oxygen option. Does it mean that application is in the watch (active 2) but is not enabled?
Thanks @Dante63 - I followed the alternate (long) path and got BP installed successfully. I did run into a couple of issues that others have also pointed out, which you may want to add to your instructions:
1) JDK path needs to be added to the Path system environment variables, otherwise fit2installer fails to sign the TPKs. That Path addition looks like C:\Users\myuserID\AppData\Local\.package-manager\jdk\bin
2) APK Easy Tool installation should be added to Exclusions in Windows Security or any other antivirus. APK compilation was not working for me until this was done,.
Again thanks for putting this all together and letting us enable functionality that we paid for!
I'm glad it worked and thanks for sharing details that would help othersNo words to thank you guys. Every thing went fine after correcting the JAVA bath on system environment variables.
I just check the widgets on watch and it's there. I'm so happy
Many Thanks to you![]()
Thanks everybody.
It was indeed a problem with the path on the JDK.
It must to be added to the windows path.
Everything works wonderfully.
Big thanks Dante.
View attachment 5254249
Thanks @Dante63 - I followed the alternate (long) path and got BP installed successfully. I did run into a couple of issues that others have also pointed out, which you may want to add to your instructions:
1) JDK path needs to be added to the Path system environment variables, otherwise fit2installer fails to sign the TPKs. That Path addition looks like C:\Users\myuserID\AppData\Local\.package-manager\jdk\bin
2) APK Easy Tool installation should be added to Exclusions in Windows Security or any other antivirus. APK compilation was not working for me until this was done,.
Again thanks for putting this all together and letting us enable functionality that we paid for!
PATH Environment can be fixed according to Java website guide like:This is what I used by the way, in case it helps anyone else, for setting the path system.
How To Set Path Environment Variables In Windows 10
How To Set Path Environment Variables In...www.addictivetips.com
It is not neccesorcly it would work as some tried the method and failed to make it work, so remember, in this case, google is your best friend lol and he will be of a great help if these solutions did not work (hopefully they work though), And more to that, I will share this link which I found interesting for those who want to read more about different the "main" exceptions:finally found the solution:
you have to replace the "sdk.info" and "sdk.version"-files within the "Fit2Installer\tizen\tizen-studio"-folder with copied ones from the tizen-studio-folder under C:\tizen-studio
then copy all the files from the subfolder tools\ide to the corrospondent folders under C:\Fit2Installer\tizen\tizen-studio
then run the sign.bat ... there will be some strange lines, but at the end it runs through.
hope it helps!
Yeah, Samsung Health does consume a lot on the watch, SHM has nothing to do with it, it can be seen in galaxy wearables, about watch then battery, Samsung Health ha many running services, such as Heart Beat, Steps, Auto-workout detect, stress, sleeping time, stairs and so on...Hello Dante, today too I received an update OTA for the Samsung Health app on the GW3 and installed it. Since I last charged the SW3 battery, about 22 hours ago, I now have left an 27% and the Samsung Health app has consumed 25% of the total battery.
I don't think it is related to my previous installation of SHM 183 and to discard it and continue with my troubleshooting, I ask you if you have any suggestions in this regard? Should I reset the SW3?
Thanks!
did you try the alternative way?I managed to install the modified Health Monitor app 1.1.0.183 and it works.
I tried to install both the ECG as well as the BP installers but only the ECG managed to install.
I don't have the Health Monitor app on my watch, according to your video tutorial.
Let me know if you need help...Thanks for your help!
I have not either SHM installed on watch.
I will try...
Perhaps you are trying to install the unsigned bp... after signing the BP, go to folder install me... I made that mistake and thought something is wrong till I realized I have been using the same unsigned bp inside the sign me folder...Yeah, I know, I'm going to alternative way but only ecg is installed, not BP.. Don't know why.
First, Credit him by adding @ and typing his name like @l0nax ...I have a watch with a pre-installed SHM like yours. On a nearby branch, a respected I0nax has developed an alternative solution. To be installed as a separate application on the watch without affecting the installed one. Works normally. Yesterday he rebuilt the latest 0.39 version.
p.s Installation via signature