Root e TWRP on Huawei Mate 10 lite

Search This thread

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
The AL-00-Firmware is available for Download, and in post 453 stands that Someone has looked into it, and there are the numbers "RNE-L00,L01,L02,L21,L22" in hw-info-file!? Do You think, that we could take it for restore!?

I downloaded the full-ota rom verified with my imei with firmware finder I ran all the dload method but it does not work.
I downloaded the full-ota rom with proxy firmware finder but when restart devices it does not work.
do you think i should use HuaweiUpdateExtractor?
the problem is that when I have to flash com fastboot will not work!
I'm seriously thinking about bringing my device to the huawei service:crying:
 

Attachments

  • Screenshot_20180120-203333.png
    Screenshot_20180120-203333.png
    103.8 KB · Views: 152

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
The AL-00-Firmware is available for Download, and in post 453 stands that Someone has looked into it, and there are the numbers "RNE-L00,L01,L02,L21,L22" in hw-info-file!? Do You think, that we could take it for restore!?

I downloaded the full-ota rom verified with my imei with firmware finder I ran all the dload method but it does not work.
I downloaded the full-ota rom with proxy firmware finder but when restart devices it does not work.
do you think i should use HuaweiUpdateExtractor?
the problem is that when I have to flash whit fastboot will not work!
I'm seriously thinking about bringing my device to the huawei service:crying:
 

roselanguste

Senior Member
Mar 26, 2014
328
44
I downloaded the full-ota rom verified with my imei with firmware finder I ran all the dload method but it does not work.
I downloaded the full-ota rom with proxy firmware finder but when restart devices it does not work.
do you think i should use HuaweiUpdateExtractor?
the problem is that when I have to flash whit fastboot will not work!
I'm seriously thinking about bringing my device to the huawei service:crying:

Have You try the force update procedure, with dload-folder and power-on the device with press all buttons, to start force-update-mode!?
 

roselanguste

Senior Member
Mar 26, 2014
328
44

I find that really sad from Huawei! In the description of every Huawei-OTA-Update stands, that when You have Apps installed, what controlling the Root-Function, the Update will don't works, and in that Case You should make the Update over SD-Card, or contact the Huawei-Support! - But nothing about, that it could Brick or FRP-Lock Your Device! I think I will write a Email to Huawei-Support, that They should please say us, how it works right, or give us at least, a fully Firmware-File for Recover our Devices!
 
  • Like
Reactions: Maniele62

ante0

Senior Member
Dec 28, 2009
3,207
1,577
Stockholm
I downloaded the full-ota rom verified with my imei with firmware finder I ran all the dload method but it does not work.
I downloaded the full-ota rom with proxy firmware finder but when restart devices it does not work.
do you think i should use HuaweiUpdateExtractor?
the problem is that when I have to flash whit fastboot will not work!
I'm seriously thinking about bringing my device to the huawei service:crying:

Even if it would work you would've bricked. You need to rebrand if you want to go L21/01 etc to AL00.

I guess you could ask @mankindtw to patch recovery for RNE so it allows installation, but you still need RNE AL00 Oeminfo before you can rebrand.
 
  • Like
Reactions: Maniele62

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
Even if it would work you would've bricked. You need to rebrand if you want to go L21/01 etc to AL00.

I guess you could ask @mankindtw to patch recovery for RNE so it allows installation, but you still need RNE AL00 Oeminfo before you can rebrand.

I'm just trying to make my device work, if you read my last posts you'll understand. My device worked perfectly but I wanted to try updating from b120 to b 130 with a twrp backup. I am rne-l21c432 and I want to stay thermos.
Thank you
 

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
toulouse
restaure rne-l21c432b130 frp lock

I'm just trying to make my device work, if you read my last posts you'll understand. My device worked perfectly but I wanted to try updating from b120 to b 130 with a twrp backup. I am rne-l21c432 and I want to stay thermos.
Thank you
dcunlocker can open FRP. https://www.dc-unlocker.com/
I managed to restore my device.
if you used unlocker for the FRP.
after redoing the bootloader code.
install TWRP. https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
restore my backup, restore, select all except oeminfo and product. https://mega.nz/#F!lklADSZY!ORwYA7HAoVlkbjp03EoAkg
restarts.
you noticed that the camera starts but the sound, video, camera, theme boot-animation ..... does not work. (This is due to product twrp not restoring it properly)
took this meta_inf.zip, get product.ext4.win renamed it in product.img.
place it in the meta-inf zip. https://forum.xda-developers.com/showpost.php?p=75259927&postcount=452
reboot.
from twrp, install meta-inf.zip.
returned to twrp.
wipe / data format.
install supersu ante0 https://mega.nz/#!BgVwGILJ!PGq_3cupAyO4n66RLIGMq-V13yKOVqHzacUxwd5m5fw
reboot.
restart in twrp.
install publiczip file from ante0. to repair theme. https://www.dropbox.com/s/6r1we6xf2dkk0qp/hw_public_rne-l21.zip?dl=0
(this file is for rne-L21.
If you're not on RNE-L21 you need to extract zip and rename / data / hw_init / version / special_cust / RNE-21 to your model.
And open META-INF / com / google / android / updater-script in notepad ++, search and replace all RNE-21 with your model. Save and rezip and flash.)

reboot.
we now cover.
to restore the device to the origin.
twrp, restore bootext4.win that I did before being root. https://mega.nz/#F!5gl3nDzL!N8pPmT05mnWfnYyXoZFExA
restarts.
now, with adb flash recovery.img stock. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
then you could also lock the bootloader code.
he will reset himself. and restart all clean.
édit
ah, I forgot to say.
that you will remain dolbyatmos and viper. they are in my original backup.
no problem they are not annoying.
if you wanted to use them. (be root and install the permissive mode selinux) https://mega.nz/#F!FsUHnTbb!5J0nMtCuXIhSMzxXBOD-wQ
or delete them, be root, and with a file explorer delete them system / priv-app /.
sorry for you.
I know that I spent two days understanding everything and finding a simple solution.
I am convinced that we can do even better, but here I am tired.
 
Last edited:

flamedrops

Senior Member
Dec 9, 2014
601
191
Ortigas
dcunlocker can open FRP. https://www.dc-unlocker.com/
I managed to restore my device.
if you used unlocker for the FRP.
after redoing the bootloader code.
install TWRP. https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
restore my backup, restore, select all except oeminfo and product. https://mega.nz/#F!lklADSZY!ORwYA7HAoVlkbjp03EoAkg
restarts.
you noticed that the camera starts but the sound, video, camera, theme boot-animation ..... does not work. (This is due to product twrp not restoring it properly)
took this meta_inf.zip, get product.ext4.win renamed it in product.img.
place it in the meta-inf zip. https://forum.xda-developers.com/showpost.php?p=75259927&postcount=452
reboot.
from twrp, install meta-inf.zip.
returned to twrp.
wipe / data format.
install supersu ante0 https://mega.nz/#!BgVwGILJ!PGq_3cupAyO4n66RLIGMq-V13yKOVqHzacUxwd5m5fw
reboot.
restart in twrp.
install publiczip file from ante0. to repair theme. https://www.dropbox.com/s/6r1we6xf2dkk0qp/hw_public_rne-l21.zip?dl=0
reboot.
we now cover.
to restore the device to the origin.
twrp, restore bootext4.win that I did before being root. https://mega.nz/#F!5gl3nDzL!N8pPmT05mnWfnYyXoZFExA
restarts.
now, with adb flash recovery.img stock. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
then you could also lock the bootloader code.
he will reset himself. and restart all clean.
édit
ah, I forgot to say.
that you will remain dolbyatmos and viper. they are in my original backup.
no problem they are not annoying.
if you wanted to use them. (be root and install the permissive mode selinux) https://mega.nz/#F!FsUHnTbb!5J0nMtCuXIhSMzxXBOD-wQ
or delete them, be root, and with a file explorer delete them system / priv-app /.
sorry for you.
I know that I spent two days understanding everything and finding a simple solution.
I am convinced that we can do even better, but here I am tired.

sir can i use that firmware to my RNE-L22? is it compatible?
 

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
dcunlocker can open FRP. https://www.dc-unlocker.com/
I managed to restore my device.
if you used unlocker for the FRP.
after redoing the bootloader code.
install TWRP. https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
restore my backup, restore, select all except oeminfo and product. https://mega.nz/#F!lklADSZY!ORwYA7HAoVlkbjp03EoAkg
restarts.
you noticed that the camera starts but the sound, video, camera, theme boot-animation ..... does not work. (This is due to product twrp not restoring it properly)
took this meta_inf.zip, get product.ext4.win renamed it in product.img.
place it in the meta-inf zip. https://forum.xda-developers.com/showpost.php?p=75259927&postcount=452
reboot.
from twrp, install meta-inf.zip.
returned to twrp.
wipe / data format.
install supersu ante0 https://mega.nz/#!BgVwGILJ!PGq_3cupAyO4n66RLIGMq-V13yKOVqHzacUxwd5m5fw
reboot.
restart in twrp.
install publiczip file from ante0. to repair theme. https://www.dropbox.com/s/6r1we6xf2dkk0qp/hw_public_rne-l21.zip?dl=0
reboot.
we now cover.
to restore the device to the origin.
twrp, restore bootext4.win that I did before being root. https://mega.nz/#F!5gl3nDzL!N8pPmT05mnWfnYyXoZFExA
restarts.
now, with adb flash recovery.img stock. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
then you could also lock the bootloader code.
he will reset himself. and restart all clean.
édit
ah, I forgot to say.
that you will remain dolbyatmos and viper. they are in my original backup.
no problem they are not annoying.
if you wanted to use them. (be root and install the permissive mode selinux) https://mega.nz/#F!FsUHnTbb!5J0nMtCuXIhSMzxXBOD-wQ
or delete them, be root, and with a file explorer delete them system / priv-app /.
sorry for you.
I know that I spent two days understanding everything and finding a simple solution.
I am convinced that we can do even better, but here I am tired.

dc-unlocker read my device but did not give me the option to unlock frp so I tried frp unlocker tool, I bought the code but when I entered it was a catastrophe.
the device is not recognized by the PC and does not turn off anymore.
obligatory stop at the huawei assistance service or does anyone know how to do?
 

Attachments

  • IMG_20180122_145440.jpg
    IMG_20180122_145440.jpg
    276.6 KB · Views: 167

roselanguste

Senior Member
Mar 26, 2014
328
44
dc-unlocker read my device but did not give me the option to unlock frp so I tried frp unlocker tool, I bought the code but when I entered it was a catastrophe.
the device is not recognized by the PC and does not turn off anymore.
obligatory stop at the huawei assistance service or does anyone know how to do?

Oh, F***!? In XDA ist a Thread with a Tutorial to solve that, but You need update.app, and I don't know if update.app from full Firmware-File is necessary, or if update.app from ota is enough!? I link You the Thread here, the tutorial is on last side of the Thread post 37!

https://forum.xda-developers.com/huawei-p9lite/help/error-mode-help-asap-t3519108/page4
 
  • Like
Reactions: Maniele62

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
Oh, F***!? In XDA ist a Thread with a Tutorial to solve that, but You need update.app, and I don't know if update.app from full Firmware-File is necessary, or if update.app from ota is enough!? I link You the Thread here, the tutorial is on last side of the Thread post 37!

https://forum.xda-developers.com/huawei-p9lite/help/error-mode-help-asap-t3519108/page4

I thank you for your availability, unfortunately the problem is that the PC does not see the device, the device is locked in bootloader as in the picture and does not go off. he is a zombie :(
 

roselanguste

Senior Member
Mar 26, 2014
328
44
I thank you for your availability, unfortunately the problem is that the PC does not see the device, the device is locked in bootloader as in the picture and does not go off. he is a zombie :(

I have searched for this, and read a few threads about, and in the most stand, that in this Error-Mode, is always a Button-Combo, with that You can Power-Off the Device, but You must try and find it, because it is on every new Huawei-Series a other!? And when You find it, or Accu goes out of power, the Device sometimes boot up in System, sometimes error mode, back and forth on every boot up!? Also after Power-Off, this or that way, when You plug on power-cord with button-combo for Fastboot-Mode, fastboot should work again!? It seems the important thing here is, to shut down the Device, for restart!?
 

flamedrops

Senior Member
Dec 9, 2014
601
191
Ortigas
dc-unlocker read my device but did not give me the option to unlock frp so I tried frp unlocker tool, I bought the code but when I entered it was a catastrophe.
the device is not recognized by the PC and does not turn off anymore.
obligatory stop at the huawei assistance service or does anyone know how to do?

i encountered that problem, dont worry you need to empty your cell first and when your phone is empty charge it and boot your phone then will turn to unlock or relock mode.
 
  • Like
Reactions: Maniele62

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
i encountered that problem, dont worry you need to empty your cell first and when your phone is empty charge it and boot your phone then will turn to unlock or relock mode.

in fact it's what I'm doing, waiting for the battery to empty, it's my last hope.
-----------------------------------
the battery has been discharged and the system has restarted, but after restarting in the bootloader whith adb command it is still as before. The pc does not see the device in bootloader.
adb command ok
fastboot command (dead)
 
Last edited:

flamedrops

Senior Member
Dec 9, 2014
601
191
Ortigas
in fact it's what I'm doing, waiting for the battery to empty, it's my last hope.
-----------------------------------
the battery has been discharged and the system has restarted, but after restarting in the bootloader whith adb command it is still as before. The pc does not see the device in bootloader.
adb command ok
fastboot command (dead)

have you tried fastboot mode again?
 

Maniele62

Senior Member
Nov 22, 2017
88
53
Siracusa
Have You tried Huawei HiSuite for PC!? It has a special Rescue-Mode, for such things!

Edit: What for Button-Combo do You make by reboot?
I rebooted the power button and restarted in bootloader error.
I had to wait until the battery emptied, I tried with adb reboot bootloader and reboot always in bootloader error.
now I'm waiting for the battery to empty again.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    huawei mate 10 lite full backup

    Finally I managed to solve the problem of the full backup from twrp "data" included, it is very easy but you will lose every userdata file.
    1. Start huawei mate 10 lite in recovery twrp
    2. Wipe ----> advanced wipe
    3. Check "DATA"
    4. Repair or Change File System
    5. Change File System
    6. EXT4 ( mine is f2fs)
    7. ------> swipe to change
    8. F2FS
    9. ------> swipe to change
    now the smartphone will be like new but the backup will work 100%
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 03:59 PM ---------- Previous post was at 03:58 PM ----------

    Works TWRP fully functional on Your Device!? I mean, can You make full Nandroid-Backup with TWRP (All Partitions)!? I have the same Device, but have not rooted, because OTA-Firmware-Update don't work anymore after root, and I don't want to lose the ability for OTA-Firmware-Updates!
    Thanks!

    hi Roselanguste, see my last post!!!!!!!!!!!!!!!
    5
    Huawei Mate 10 Lite: Unlock bootloader, root, format data and full twrp backup.

    1. see this link for Unlock the bootloader and root Huawei Mate 10 Lite: https://forum.xda-developers.com/showpost.php?p=74741194&postcount=195
    2. copy in the adb/fastboot folder
    https://mega.nz/#!UMgxXL4K!HOeRC9Si3kexiKNgNe7PH40Fc-dehv6iQcu6qLd23xY
    this twrp.img: https://mega.nz/#!JRQEiKDB!0R458sPw1Gk2GHdJnvd8QAPg5LQ8ClqxQdR-0nZ8RGA
    3. copy in the external sdcard this supersu kindly offered by ante0:
    https://mega.nz/#!IVZQxILR!rRJjcMNnT4Vq4od62hcyiZHHAPkqF4tpyEKDdQ0Sj3Y
    3. Uninstall from device the supersu if it exists.
    4. flash from adb folder terminal the twrp.img
    5. reboot in recovery
    6. wipe - format data - yes
    7. install from sdcard the attached supersu
    8. reboot
    10. enjoy ;)
    Now you can do all the full backups you want

    We accept thanks :angel:

    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***
    4
    Procedure for Unlock the bootloader and root my Huawei Mate 10 Lite

    From the phone click on Settings> Phone Info and then seven times on the item Number Build;
    Go back and enter the new Developer Options menu;
    Enable the USB debugging and OEM Unlock options;
    Using the computer, download and install the ADB drivers;
    Now create an account or (if you have not already) connected to the site emui.huawei.com;
    Accept the terms and conditions at the end of the page and press the Next button;
    Fill out the form with the required data and press on the Commit button;
    Keep the code you will receive;
    At this point enter the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + power for 10 seconds to put the phone in reboot bootloader
    Write "fastboot oem unlock received code";
    Now type "fastboot reboot".
    copy the zipped SuperSu file to the phone's sd card;
    copy the twrp.img to the folder with the ADB drivers;
    enter in the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + down for 10 seconds to put the phone in reboot bootloader;
    now type:
    fastboot devices
    fastboot flash recovery twrp.img
    turn off the phone
    hold down vol + and power until twrp starts
    at this point the twrp opens
    - Swipe to allow modification
    - Install
    - Select Storage
    - External Storage
    - SuperSu
    - Reboot System
    That's all
    A big thank you to Aonja for her support in creating the twrp.img file for me.
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 08:55 AM ---------- Previous post was at 08:38 AM ----------

    Code:
    <Profile name="Huawei Nova 2i (RNE-L22)" author="Aonja">
        <Files>
          <File type="SHA256RSA" filetype="signature">00.SHA256RSA.IMG</File>
          <File type="CRC" filetype="checksum">01.CRC.IMG</File>
          <File type="CURVER" filetype="unknown">02.CURVER.IMG</File>
          <File type="EFI" filetype="unknown">03.EFI.IMG</File>
          <File type="VERLIST" filetype="unknown">04.VERLIST.IMG</File>
          <File type="XLOADER" filetype="unknown">05.XLOADER.IMG</File>
          <File type="PACKAGE_TYPE" filetype="unknown">06.PACKAGE_TYPE.IMG</File>
          <File type="boot" partition="/dev/block/mmcblk0p28">boot.img</File>
          <File type="bootfail_info" partition="/dev/block/mmcblk0p41">bootfail_info.img</File>
          <File type="cache" partition="/dev/block/mmcblk0p36">cache.img</File>
          <File type="cust" partition="/dev/block/mmcblk0p45">cust.img</File>
          <File type="dfx" partition="/dev/block/mmcblk0p34">dfx.img</File>
          <File type="dts" partition="/dev/block/mmcblk0p30">dts.img</File>
          <File type="fastboot" partition="/dev/block/mmcblk0p5">fastboot.img</File>
          <File type="frp" partition="/dev/block/mmcblk0p4">frp.img</File>
          <File type="fw_hifi" partition="/dev/block/mmcblk0p27">fw_hifi.img</File>
          <File type="fw_lpm3" partition="/dev/block/mmcblk0p3">fw_lpm3.img</File>
          <File type="hisitest0" partition="/dev/block/mmcblk0p37">hisitest0.img</File>
          <File type="hisitest1" partition="/dev/block/mmcblk0p38">hisitest1.img</File>
          <File type="hisitest2" partition="/dev/block/mmcblk0p39">hisitest2.img</File>
          <File type="misc" partition="/dev/block/mmcblk0p20">misc.img</File>
          <File type="modem_fw" partition="/dev/block/mmcblk0p31">modem_fw.img</File>
          <File type="modem_om" partition="/dev/block/mmcblk0p18">modem_om.img</File>
          <File type="modem_secure" partition="/dev/block/mmcblk0p17">modem_secure.img</File>
          <File type="modemnvm_backup" partition="/dev/block/mmcblk0p10">modemnvm_backup.img</File>
          <File type="modemnvm_factory" partition="/dev/block/mmcblk0p6">modemnvm_factory.img</File>
          <File type="modemnvm_img" partition="/dev/block/mmcblk0p11">modemnvm_img.img</File>
          <File type="modemnvm_system" partition="/dev/block/mmcblk0p12">modemnvm_system.img</File>
          <File type="modemnvm_update" partition="/dev/block/mmcblk0p21">modemnvm_update.img</File>
          <File type="nvme" partition="/dev/block/mmcblk0p7">nvme.img</File>
          <File type="oeminfo" partition="/dev/block/mmcblk0p8">oeminfo.img</File>
          <File type="patch" partition="/dev/block/mmcblk0p40">patch.img</File>
          <File type="persist" partition="/dev/block/mmcblk0p16">persist.img</File>
          <File type="product" partition="/dev/block/mmcblk0p48">product.img</File>
          <File type="recovery" partition="/dev/block/mmcblk0p29">recovery.img</File>
          <File type="recovery2" partition="/dev/block/mmcblk0p22">recovery2.img</File>
          <File type="reserved2" partition="/dev/block/mmcblk0p23">reserved2.img</File>
          <File type="reserved3" partition="/dev/block/mmcblk0p9">reserved3.img</File>
          <File type="reserved4" partition="/dev/block/mmcblk0p14">reserved4.img</File>
          <File type="reserved5" partition="/dev/block/mmcblk0p15">reserved5.img</File>
          <File type="reserved7" partition="/dev/block/mmcblk0p32">reserved7.img</File>
          <File type="reserved8" partition="/dev/block/mmcblk0p33">reserved8.img</File>
          <File type="reserved9" partition="/dev/block/mmcblk0p43">reserved9.img</File>
          <File type="rrecord" partition="/dev/block/mmcblk0p42">rrecord.img</File>
          <File type="securety_storage" partition="/dev/block/mmcblk0p13">securety_storage.img</File>
          <File type="sensorhub" partition="/dev/block/mmcblk0p26">sensorhub.img</File>
          <File type="splash2" partition="/dev/block/mmcblk0p19">splash2.img</File>
          <File type="system" partition="/dev/block/mmcblk0p44">system.img</File>
          <File type="teeos" partition="/dev/block/mmcblk0p24">teeos.img</File>
          <File type="trustfirmware" partition="/dev/block/mmcblk0p25">trustfirmware.img</File>
          <File type="userdata" partition="/dev/block/mmcblk0p49">userdata.img</File>
          <File type="vbmeta" partition="/dev/block/mmcblk0p35">vbmeta.img</File>
          <File type="vendor" partition="/dev/block/mmcblk0p47">vendor.img</File>
          <File type="version" partition="/dev/block/mmcblk0p46">version.img</File>
          <File type="vrl" partition="/dev/block/mmcblk0p1">vrl.img</File>
          <File type="vrl_backup" partition="/dev/block/mmcblk0p2">vrl_backup.img</File>
        </Files>
      </Profile>
    for [TOOL] Huawei Update Extractor
    https://forum.xda-developers.com/showthread.php?t=2433454

    ---------- Post added at 07:20 PM ---------- Previous post was at 07:00 PM ----------



    L21
    https://drive.google.com/file/d/1J903TsF2aXTp4kVgAvTVO7HYUIIzlg0a/view?usp=sharing

    OK, tomorrow I post my procedure.
    Now is too late, I am Italian, excuse my English.

    Hi Roselanguste, see my post
    3

    i ported twrp and rooted + xposed done, my device is nova 2i. if it same i will share it soon.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone