Root e TWRP on Huawei Mate 10 lite

Search This thread

balthasar

Senior Member
Oct 8, 2005
52
12
Istanbul
www.sokel.gen.tr
Oh, Yes You are right! I have forgotten the step to Wipe/Format-User-Data before rooting! Do You know, is it possible to Wipe/Format-User-Data AFTER root, to enable possibility to make Backups also of the Data-Partition!?
Thanks!

If you format data now, you will lose your datas and root too. So you must root and follow instruction for Themes and Histen again.
Backup your infos and perform procedure again. This time root just after formating data. You may not reboot between them
 
  • Like
Reactions: roselanguste

roselanguste

Senior Member
Mar 26, 2014
328
44
If you format data now, you will lose your datas and root too. So you must root and follow instruction for Themes and Histen again.
Backup your infos and perform procedure again. This time root just after formating data. You may not reboot between them

Ok, Thanks! Have I understand right, - I boot in TWRP, wipe/format-user-data (after that datas and root are gone), flash su.zip, flash hw-themes.zip, make folder for hw-histen and took hw-histen-apk in it and give the right permissions for the folder, reboot. - And then Device is rooted with fully working HW-Themes/Histen and can fully backup with TWRP (inclusive User-Data), and I don't must reboot in any of the steps!?
Thanks!
 

balthasar

Senior Member
Oct 8, 2005
52
12
Istanbul
www.sokel.gen.tr
[/COLOR]
Ok, Thanks! Have I understand right, - I boot in TWRP, wipe/format-user-data (after that datas and root are gone), flash su.zip, flash hw-themes.zip, make folder for hw-histen and took hw-histen-apk in it and give the right permissions for the folder, reboot. - And then Device is rooted with fully working HW-Themes/Histen and can fully backup with TWRP (inclusive User-Data), and I don't must reboot in any of the steps!?
Thanks!

Exactly...
But to be sure, I rebooted the phone after rooting, then flashed others.
And at the end backuped with twrp
 
  • Like
Reactions: roselanguste

Arif Ferdian

Senior Member
Dec 10, 2016
68
13
with Root Explorer, select folder/file you want to change permission, hold it on until highlight-ed, then press 3 dot on the upper right, select permission, enter octal, and press oke, and your good to go.

Hello!
I know a bit about rooting, and have my device successful rooted Yesterday! Sorry when this is a beginner question, but how You give a permission like 0755,0644,... to a folder! Maybe I will root again, with wipe/format-user-data, and after this I must restore HW-Themes and HW-Histen. For HW-Themes I know the procedure, and I understand the steps You wrote for restore HW-Histen, except how give permissions to folders, because I have not done this so far?!
Thanks!
 
  • Like
Reactions: roselanguste

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
toulouse

Attachments

  • 2018-02-15-06-53-00.png
    2018-02-15-06-53-00.png
    195.2 KB · Views: 70

flamedrops

Senior Member
Dec 9, 2014
601
191
Ortigas
Is there anyone who could make a custom ROM to our device?

---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------

Hello
I use magisk 15.3.zip.
it works for me.

did you find problem to it?

---------- Post added at 06:25 AM ---------- Previous post was at 06:24 AM ----------

Hello
I use magisk 15.3.zip.
it works for me.

did you find problem to it?
 

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
toulouse
Is there anyone who could make a custom ROM to our device?

---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------



did you find problem to it?

---------- Post added at 06:25 AM ---------- Previous post was at 06:24 AM ----------



did you find problem to it?

Hello
I use magisk 15.3.zip.
it works for me.
in addition to easy to uninstall.
Just press on uninstall.
it restarts.
install with adb and fastboot, recovery.img stock huawei.
There you go.
I could update if it comes a day for us.
 

flamedrops

Senior Member
Dec 9, 2014
601
191
Ortigas
Hello
I use magisk 15.3.zip.
it works for me.
in addition to easy to uninstall.
Just press on uninstall.
it restarts.
install with adb and fastboot, recovery.img stock huawei.
There you go.
I could update if it comes a day for us.

What if im going to un install the supersu and replace it with magisk, can i use also the twrp backup and restore function without any problem encounter?
 
Last edited:

roselanguste

Senior Member
Mar 26, 2014
328
44
[/COLOR]

Exactly...
But to be sure, I rebooted the phone after rooting, then flashed others.
And at the end backuped with twrp

Ok, I will try it, and make also for sure a reboot after the root step, and after the others!
Thanks!

---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------

with Root Explorer, select folder/file you want to change permission, hold it on until highlight-ed, then press 3 dot on the upper right, select permission, enter octal, and press oke, and your good to go.

Now I have again learned something about this stuff!
Thanks!

---------- Post added at 02:39 PM ---------- Previous post was at 02:34 PM ----------

thanks i have successfully manage removing supersu and replace it with magisk 5.3 thanks. i can now use my viper4.

Perfect! Could You Please write here the steps for change from su to magisk! That where Great!
Thanks!
 

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
toulouse
What if im going to un install the supersu and replace it with magisk, can i use also the twrp backup and restore function without any problem encounter?
his, I do not know, I did not do it.
what I know:
is that if we do, twrp + data + supersu format.
when restarting, things are missing (theme ....)
but
backup full works.
there are more problems to restore it, product ....
maybe it will restart in NEO etc .... if you do not measure the thing you risked the bootloops.
while with magisk.
twrp + magisk, the root works.
tanpis for backup,
the system remains complete I do not miss anything except if I delete it. of course.
to remove the root if there is need (update), I just have to uninstall it.
and reinstall stock recovery.img. here is.
 

Syoenth

Senior Member
May 11, 2015
271
29
38
Merida
Can anyone give me a link of the TWRP file you use and how to install? also, I need to know what steps I must do to have Magisk, thanks in advance
 

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
toulouse
Can anyone give me a link of the TWRP file you use and how to install? also, I need to know what steps I must do to have Magisk, thanks in advance
I am RNE-l21c432b130
and I use the one from ante0 ..
TWRP https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
magisk v15.3 https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
simple installation.
** bootloader code.
install TWRP.
start TWRP. INSTALL magisk 15.3 .zip
reboot.
here is

you wish to divert in stock huawei.
ok, set magisk. uninstall.
he reboots.
then with adb and fastboot, flash recovery.img stock your version. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
here is.
 
Last edited:

Syoenth

Senior Member
May 11, 2015
271
29
38
Merida
I am RNE-l21c432b130
and I use the one from ante0 ..
TWRP https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
magisk v15.3 https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
simple installation.
** bootloader code.
install TWRP.
start TWRP. INSTALL magisk 15.3 .zip
reboot.
here is

you wish to divert in stock huawei.
ok, set magisk. uninstall.
he reboots.
then with adb and fastboot, flash recovery.img stock your version. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
here is.

I have RNE-L03C212B100, this method will work?
 

flamedrops

Senior Member
Dec 9, 2014
601
191
Ortigas
his, I do not know, I did not do it.
what I know:
is that if we do, twrp + data + supersu format.
when restarting, things are missing (theme ....)
but
backup full works.
there are more problems to restore it, product ....
maybe it will restart in NEO etc .... if you do not measure the thing you risked the bootloops.
while with magisk.
twrp + magisk, the root works.
tanpis for backup,
the system remains complete I do not miss anything except if I delete it. of course.
to remove the root if there is need (update), I just have to uninstall it.
and reinstall stock recovery.img. here is.

Here is what i did without any of my apps deleted or wiping data, what i did is to restore only your original bootloader, then i will restart the phone and i notice that my phone didn't open screen menu due to security but i reboot into recovery again and flash magisk 15.3. after that i reboot into system. Then it will successfully booted and rooted of magisk, then i completely uninstall supersu in the menu. only google account was deleted and my messages, but is not a big deal because i will sign in again my google account. :)
 
Last edited:

roselanguste

Senior Member
Mar 26, 2014
328
44
Hello
thank you, what RNE do you have?
I am rne-l21c432.
look why, I'm not this theme file on this path.
also another question.
I am looking to activate 7x7 display.
it is in version / special_cust / RNE-L21 / hw / eu / xml / hw_launcher-default_config.xml
change 5x6 by 7x7.
save, then went to settings, advanced settings, backup and reinitiation, restore all the settings.
7x7 display works, but widget settings make force close.
can you help me?

Have You get it fully working, the 7x7 Display, or are the widgets still a problem!?
Thanks!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    huawei mate 10 lite full backup

    Finally I managed to solve the problem of the full backup from twrp "data" included, it is very easy but you will lose every userdata file.
    1. Start huawei mate 10 lite in recovery twrp
    2. Wipe ----> advanced wipe
    3. Check "DATA"
    4. Repair or Change File System
    5. Change File System
    6. EXT4 ( mine is f2fs)
    7. ------> swipe to change
    8. F2FS
    9. ------> swipe to change
    now the smartphone will be like new but the backup will work 100%
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 03:59 PM ---------- Previous post was at 03:58 PM ----------

    Works TWRP fully functional on Your Device!? I mean, can You make full Nandroid-Backup with TWRP (All Partitions)!? I have the same Device, but have not rooted, because OTA-Firmware-Update don't work anymore after root, and I don't want to lose the ability for OTA-Firmware-Updates!
    Thanks!

    hi Roselanguste, see my last post!!!!!!!!!!!!!!!
    5
    Huawei Mate 10 Lite: Unlock bootloader, root, format data and full twrp backup.

    1. see this link for Unlock the bootloader and root Huawei Mate 10 Lite: https://forum.xda-developers.com/showpost.php?p=74741194&postcount=195
    2. copy in the adb/fastboot folder
    https://mega.nz/#!UMgxXL4K!HOeRC9Si3kexiKNgNe7PH40Fc-dehv6iQcu6qLd23xY
    this twrp.img: https://mega.nz/#!JRQEiKDB!0R458sPw1Gk2GHdJnvd8QAPg5LQ8ClqxQdR-0nZ8RGA
    3. copy in the external sdcard this supersu kindly offered by ante0:
    https://mega.nz/#!IVZQxILR!rRJjcMNnT4Vq4od62hcyiZHHAPkqF4tpyEKDdQ0Sj3Y
    3. Uninstall from device the supersu if it exists.
    4. flash from adb folder terminal the twrp.img
    5. reboot in recovery
    6. wipe - format data - yes
    7. install from sdcard the attached supersu
    8. reboot
    10. enjoy ;)
    Now you can do all the full backups you want

    We accept thanks :angel:

    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***
    4
    Procedure for Unlock the bootloader and root my Huawei Mate 10 Lite

    From the phone click on Settings> Phone Info and then seven times on the item Number Build;
    Go back and enter the new Developer Options menu;
    Enable the USB debugging and OEM Unlock options;
    Using the computer, download and install the ADB drivers;
    Now create an account or (if you have not already) connected to the site emui.huawei.com;
    Accept the terms and conditions at the end of the page and press the Next button;
    Fill out the form with the required data and press on the Commit button;
    Keep the code you will receive;
    At this point enter the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + power for 10 seconds to put the phone in reboot bootloader
    Write "fastboot oem unlock received code";
    Now type "fastboot reboot".
    copy the zipped SuperSu file to the phone's sd card;
    copy the twrp.img to the folder with the ADB drivers;
    enter in the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + down for 10 seconds to put the phone in reboot bootloader;
    now type:
    fastboot devices
    fastboot flash recovery twrp.img
    turn off the phone
    hold down vol + and power until twrp starts
    at this point the twrp opens
    - Swipe to allow modification
    - Install
    - Select Storage
    - External Storage
    - SuperSu
    - Reboot System
    That's all
    A big thank you to Aonja for her support in creating the twrp.img file for me.
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 08:55 AM ---------- Previous post was at 08:38 AM ----------

    Code:
    <Profile name="Huawei Nova 2i (RNE-L22)" author="Aonja">
        <Files>
          <File type="SHA256RSA" filetype="signature">00.SHA256RSA.IMG</File>
          <File type="CRC" filetype="checksum">01.CRC.IMG</File>
          <File type="CURVER" filetype="unknown">02.CURVER.IMG</File>
          <File type="EFI" filetype="unknown">03.EFI.IMG</File>
          <File type="VERLIST" filetype="unknown">04.VERLIST.IMG</File>
          <File type="XLOADER" filetype="unknown">05.XLOADER.IMG</File>
          <File type="PACKAGE_TYPE" filetype="unknown">06.PACKAGE_TYPE.IMG</File>
          <File type="boot" partition="/dev/block/mmcblk0p28">boot.img</File>
          <File type="bootfail_info" partition="/dev/block/mmcblk0p41">bootfail_info.img</File>
          <File type="cache" partition="/dev/block/mmcblk0p36">cache.img</File>
          <File type="cust" partition="/dev/block/mmcblk0p45">cust.img</File>
          <File type="dfx" partition="/dev/block/mmcblk0p34">dfx.img</File>
          <File type="dts" partition="/dev/block/mmcblk0p30">dts.img</File>
          <File type="fastboot" partition="/dev/block/mmcblk0p5">fastboot.img</File>
          <File type="frp" partition="/dev/block/mmcblk0p4">frp.img</File>
          <File type="fw_hifi" partition="/dev/block/mmcblk0p27">fw_hifi.img</File>
          <File type="fw_lpm3" partition="/dev/block/mmcblk0p3">fw_lpm3.img</File>
          <File type="hisitest0" partition="/dev/block/mmcblk0p37">hisitest0.img</File>
          <File type="hisitest1" partition="/dev/block/mmcblk0p38">hisitest1.img</File>
          <File type="hisitest2" partition="/dev/block/mmcblk0p39">hisitest2.img</File>
          <File type="misc" partition="/dev/block/mmcblk0p20">misc.img</File>
          <File type="modem_fw" partition="/dev/block/mmcblk0p31">modem_fw.img</File>
          <File type="modem_om" partition="/dev/block/mmcblk0p18">modem_om.img</File>
          <File type="modem_secure" partition="/dev/block/mmcblk0p17">modem_secure.img</File>
          <File type="modemnvm_backup" partition="/dev/block/mmcblk0p10">modemnvm_backup.img</File>
          <File type="modemnvm_factory" partition="/dev/block/mmcblk0p6">modemnvm_factory.img</File>
          <File type="modemnvm_img" partition="/dev/block/mmcblk0p11">modemnvm_img.img</File>
          <File type="modemnvm_system" partition="/dev/block/mmcblk0p12">modemnvm_system.img</File>
          <File type="modemnvm_update" partition="/dev/block/mmcblk0p21">modemnvm_update.img</File>
          <File type="nvme" partition="/dev/block/mmcblk0p7">nvme.img</File>
          <File type="oeminfo" partition="/dev/block/mmcblk0p8">oeminfo.img</File>
          <File type="patch" partition="/dev/block/mmcblk0p40">patch.img</File>
          <File type="persist" partition="/dev/block/mmcblk0p16">persist.img</File>
          <File type="product" partition="/dev/block/mmcblk0p48">product.img</File>
          <File type="recovery" partition="/dev/block/mmcblk0p29">recovery.img</File>
          <File type="recovery2" partition="/dev/block/mmcblk0p22">recovery2.img</File>
          <File type="reserved2" partition="/dev/block/mmcblk0p23">reserved2.img</File>
          <File type="reserved3" partition="/dev/block/mmcblk0p9">reserved3.img</File>
          <File type="reserved4" partition="/dev/block/mmcblk0p14">reserved4.img</File>
          <File type="reserved5" partition="/dev/block/mmcblk0p15">reserved5.img</File>
          <File type="reserved7" partition="/dev/block/mmcblk0p32">reserved7.img</File>
          <File type="reserved8" partition="/dev/block/mmcblk0p33">reserved8.img</File>
          <File type="reserved9" partition="/dev/block/mmcblk0p43">reserved9.img</File>
          <File type="rrecord" partition="/dev/block/mmcblk0p42">rrecord.img</File>
          <File type="securety_storage" partition="/dev/block/mmcblk0p13">securety_storage.img</File>
          <File type="sensorhub" partition="/dev/block/mmcblk0p26">sensorhub.img</File>
          <File type="splash2" partition="/dev/block/mmcblk0p19">splash2.img</File>
          <File type="system" partition="/dev/block/mmcblk0p44">system.img</File>
          <File type="teeos" partition="/dev/block/mmcblk0p24">teeos.img</File>
          <File type="trustfirmware" partition="/dev/block/mmcblk0p25">trustfirmware.img</File>
          <File type="userdata" partition="/dev/block/mmcblk0p49">userdata.img</File>
          <File type="vbmeta" partition="/dev/block/mmcblk0p35">vbmeta.img</File>
          <File type="vendor" partition="/dev/block/mmcblk0p47">vendor.img</File>
          <File type="version" partition="/dev/block/mmcblk0p46">version.img</File>
          <File type="vrl" partition="/dev/block/mmcblk0p1">vrl.img</File>
          <File type="vrl_backup" partition="/dev/block/mmcblk0p2">vrl_backup.img</File>
        </Files>
      </Profile>
    for [TOOL] Huawei Update Extractor
    https://forum.xda-developers.com/showthread.php?t=2433454

    ---------- Post added at 07:20 PM ---------- Previous post was at 07:00 PM ----------



    L21
    https://drive.google.com/file/d/1J903TsF2aXTp4kVgAvTVO7HYUIIzlg0a/view?usp=sharing

    OK, tomorrow I post my procedure.
    Now is too late, I am Italian, excuse my English.

    Hi Roselanguste, see my post
    3

    i ported twrp and rooted + xposed done, my device is nova 2i. if it same i will share it soon.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone