Root e TWRP on Huawei Mate 10 lite

[Maniele62]

It's a fake! I have seen also this Yesterday, but in the comments to this ROM stands it's fake and not possible to install! But the Custom-ROM seems very Cool, and I think I will try it!

I deleted the link

 

[Chisetdel31260]

It's a fake! I have seen also this Yesterday, but in the comments to this ROM stands it's fake and not possible to install! But the Custom-ROM seems very Cool, and I think I will try it!

Hello.
of course.
have made a backup.
TO install the rom. I did it as his.
twrp, WIPE checked
-Davilk / Art Cache
-cache
-Data
-Internal Storage
-System
and swipe
then Format data, write YES confirm.
then check Data changes f2f.
went now to install, install rom elemental.zip follow the instructions it's an aroma.
do not check double tap-tap. does not work with the matte 10 lite.
enjoy .

 

[Arif Ferdian]

hai do you know the right step to unlocking FRP via DC-unlocker, i already unlock with DC with 15 credit, but still can not unlock my FRP

Hello.
of course.
have made a backup.
TO install the rom. I did it as his.
twrp, WIPE checked
-Davilk / Art Cache
-cache
-Data
-Internal Storage
-System
and swipe
then Format data, write YES confirm.
then check Data changes f2f.
went now to install, install rom elemental.zip follow the instructions it's an aroma.
do not check double tap-tap. does not work with the matte 10 lite.
enjoy .

 

[Chisetdel31260]

hai do you know the right step to unlocking FRP via DC-unlocker, i already unlock with DC with 15 credit, but still can not unlock my FRP

BUT, if you used 15 credit.
he had to restart your phone.
so now you have to go to develloppeur settings. https://www.dc-unlocker.com/huawei-phone-disable-frp

 

[Arif Ferdian]

already did that, still oem unlock in grey and not selectable, then i buy another 15 credit, and try reset my phone, once again DC unlocker told me that succesfully unlock my phone, but my phone restart and end up in eror mode,
and now i tried to download firmware to update with DC phoenix

BUT, if you used 15 credit.
he had to restart your phone.
so now you have to go to develloppeur settings. https://www.dc-unlocker.com/huawei-phone-disable-frp

---------- Post added at 08:05 PM ---------- Previous post was at 07:46 PM ----------

ahhh i can not using dc pheonix because eror mode do not let me enter fastboot,
do you know what should i do right now?
every time i restart the phone its apper eror mode
func NO: 11 (recovery image)
Error NO : 2 (load Failed)

BUT, if you used 15 credit.
he had to restart your phone.
so now you have to go to develloppeur settings. https://www.dc-unlocker.com/huawei-phone-disable-frp

 

[Chisetdel31260]

already did that, still oem unlock in grey and not selectable, then i buy another 15 credit, and try reset my phone, once again DC unlocker told me that succesfully unlock my phone, but my phone restart and end up in eror mode,
and now i tried to download firmware to update with DC phoenix



---------- Post added at 08:05 PM ---------- Previous post was at 07:46 PM ----------

ahhh i can not using dc pheonix because eror mode do not let me enter fastboot,
do you know what should i do right now?
every time i restart the phone its apper eror mode
func NO: 11 (recovery image)
Error NO : 2 (load Failed)

ok, tried to unplug the cable.
and force the arrest. (Power).
reconnect the cable, press immediately on low volume and power.
dc-phoenix v50 will install the firmware, wait for it to finish.
to be patient, it took me 20 to 30 minutes the first time I did it.
wait without touching anything, he will restart it alone. you went to see.

 

[Arif Ferdian]

No devices detected in fastboot mode
no devices detected to update
and my phone can not shuting down,
every time i force shutdown ( power) its automaticly reboot to huawei logo and sudenly enterin Error mode

ok, tried to unplug the cable.
and force the arrest. (Power).
reconnect the cable, press immediately on low volume and power.
dc-phoenix v50 will install the firmware, wait for it to finish.
to be patient, it took me 20 to 30 minutes the first time I did it.
wait without touching anything, he will restart it alone. you went to see.

 

[Chisetdel31260]

No devices detected in fastboot mode
no devices detected to update
and my phone can not shuting down,
every time i force shutdown ( power) its automaticly reboot to huawei logo and sudenly enterin Error mode

so, try
cable always connected, on dc-phoenix v50. volume up and power.
he may have gone to erecovery and update firmware.

 

[flamedrops]

already did that, still oem unlock in grey and not selectable, then i buy another 15 credit, and try reset my phone, once again DC unlocker told me that succesfully unlock my phone, but my phone restart and end up in eror mode,
and now i tried to download firmware to update with DC phoenix

hey arif here is what i did mine, i notice before that my oem just like yours it is disabled but when i restore the original bootloader of chisetdel then after that i rebooted my phone then something security measure will appear and after that i reboot again to recovery mode and flashing magisk 15.3 then i rebooted again and then viola my oem will activated again and i can manage it on and off, and may frp became unlock again and i use to manage and flash on adb fastboot.

---------- Post added at 06:36 AM ---------- Previous post was at 06:14 AM ----------

already did that, still oem unlock in grey and not selectable, then i buy another 15 credit, and try reset my phone, once again DC unlocker told me that succesfully unlock my phone, but my phone restart and end up in eror mode,
and now i tried to download firmware to update with DC phoenix



---------- Post added at 08:05 PM ---------- Previous post was at 07:46 PM ----------

ahhh i can not using dc pheonix because eror mode do not let me enter fastboot,
do you know what should i do right now?
every time i restart the phone its apper eror mode
func NO: 11 (recovery image)
Error NO : 2 (load Failed)

hey arif here is what i did mine, i notice before that my oem just like yours it is disabled but when i restore the original bootloader of chisetdel then after that i rebooted my phone then something security measure will appear and after that i reboot again to recovery mode and flashing magisk 15.3 then i rebooted again and then viola my oem will activated again and i can manage it on and off, and may frp became unlock again and i use to manage and flash on adb fastboot.

---------- Post added at 06:41 AM ---------- Previous post was at 06:36 AM ----------

That's a very good Idea! And the other thing, I feel like You, the Device is Good, but that we have no full firmware, and very easy brickable Firmware, takes all the Fun! - I don't understand why Huawei give Us Bootloader-Unlock-Code and let Us unlock Bootloader easily, but don't give Us a full firmware since Months!? - The Firmware is also Bugy and Huawei give no Fixes since the Device comes out! That's Redicules! I really don't know, if I buy again a Huawei-Device!? - I even have thinked about resell it and buy a other Device!?

xiaomi is one of the best option.

 

[Maniele62]

already did that, still oem unlock in grey and not selectable, then i buy another 15 credit, and try reset my phone, once again DC unlocker told me that succesfully unlock my phone, but my phone restart and end up in eror mode,
and now i tried to download firmware to update with DC phoenix

hey arif here is what i did mine, i notice before that my oem just like yours it is disabled but when i restore the original bootloader of chisetdel then after that i rebooted my phone then something security measure will appear and after that i reboot again to recovery mode and flashing magisk 15.3 then i rebooted again and then viola my oem will activated again and i can manage it on and off, and may frp became unlock again and i use to manage and flash on adb fastboot.

---------- Post added at 06:36 AM ---------- Previous post was at 06:14 AM ----------



hey arif here is what i did mine, i notice before that my oem just like yours it is disabled but when i restore the original bootloader of chisetdel then after that i rebooted my phone then something security measure will appear and after that i reboot again to recovery mode and flashing magisk 15.3 then i rebooted again and then viola my oem will activated again and i can manage it on and off, and may frp became unlock again and i use to manage and flash on adb fastboot.

---------- Post added at 06:41 AM ---------- Previous post was at 06:36 AM ----------



xiaomi is one of the best option.

yes !!!!!

---------- Post added at 11:01 AM ---------- Previous post was at 10:49 AM ----------

so, try
cable always connected, on dc-phoenix v50. volume up and power.
he may have gone to erecovery and update firmware.

hello @Arif Ferdian
unfortunately there is nothing to do, I had the same problem, the error mode is before the bootloader. I hope not but what I think is that you have to bring your device to the huawei service, I did so, they changed the motherboard for free, I was lucky. now my device is new, imei new.

---------- Post added at 11:05 AM ---------- Previous post was at 11:01 AM ----------

hello @Arif Ferdian
unfortunately there is nothing to do, I had the same problem, the error mode is before the bootloader. I hope not but what I think is that you have to bring your device to the huawei service, I did so, they changed the motherboard for free, I was lucky. now my device is new, imei new.

 

[ante0]

@Arif Ferdian plug in cable when in error mode. Hold volume down and power until it reboots, release power when rebooting. See if you're in Fastboot & rescue mode now.

 

[Maniele62]

yes !!!!!

---------- Post added at 11:01 AM ---------- Previous post was at 10:49 AM ----------



hello @Arif Ferdian
unfortunately there is nothing to do, I had the same problem, the error mode is before the bootloader. I hope not but what I think is that you have to bring your device to the huawei service, I did so, they changed the motherboard for free, I was lucky. now my device is new, imei new.

---------- Post added at 11:05 AM ---------- Previous post was at 11:01 AM ----------

hello @Arif Ferdian
unfortunately there is nothing to do, I had the same problem, the error mode is before the bootloader. I hope not but what I think is that you have to bring your device to the huawei service, I did so, they changed the motherboard for free, I was lucky. now my device is new, imei new.

hello Ante0, at the time I did it so many times but nothing to do, it did not work.

 

[Chisetdel31260]

hello Ante0, at the time I did it so many times but nothing to do, it did not work.

Yes
or let it drain the battery completely.and recharge it 100%. then retent.

---------- Post added at 04:21 PM ---------- Previous post was at 04:13 PM ----------

on firmware finder, I see a new ota-mf
* 2018.02.01 RNE-L01C432B133CUSTC432D001
RNE-L21C432B133CUSTC432D001
Are somebody tested?

 

[Maniele62]

hi Chisetdel31260, i see 2018.02.01 RNE-L01C432B133CUSTC432D001
RNE-L21C432B133CUSTC432D001 but my device is not rooted and after the bad experience I will not touch it anymore until I see a full ota and oreo.

 

[Chisetdel31260]

hi Chisetdel31260, i see 2018.02.01 RNE-L01C432B133CUSTC432D001
RNE-L21C432B133CUSTC432D001 but my device is not rooted and after the bad experience I will not touch it anymore until I see a full ota and oreo.

Oh dear.
he does not care about us.
watched this changelog.
<? xml version = "1.0" encoding = "utf-8"?>
<Root>
**<component name = "TCPU" version = "RNE-L21C432B133CUSTC432D001" />
**<default-language name = "en-gb"> 2057 </ default-language>
**<language name = "en-gb" code = "2057">
****<features module = "Recommended">
******<Feature>
A new software update version is available for your device. Update from RNE-L21C432B130CUSTC432D002 to RNE-L21C432B133CUSTC432D001.
*****</ Feature>
****</ Features>
****<features module = "This upgrade offers:">
******<Feature>
● Google security patches
● Platform language issue fix
******</ Feature>
****</ Features>
<features module = "Before you update:">
******<Feature>
● You are recommended to update using Wi-Fi and make sure that the remaining power is greater than 50%.
● We recommend that you back up any important data before updating.
● It is possible to roll back to the old version. Please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance. Performing a rollback will clear user data, therefore it is recommended that you back up any important data before updating.
● If you have any third-party apps with remote control over your files, or online update will fail. If you encounter such a situation, it is recommended to update your device via an SD card, or visit the authorized Huawei service center for assistance.
******</ Feature>

 

[rooted2351]

already did that, still oem unlock in grey and not selectable, then i buy another 15 credit, and try reset my phone, once again DC unlocker told me that succesfully unlock my phone, but my phone restart and end up in eror mode,
and now i tried to download firmware to update with DC phoenix



---------- Post added at 08:05 PM ---------- Previous post was at 07:46 PM ----------

ahhh i can not using dc pheonix because eror mode do not let me enter fastboot,
do you know what should i do right now?
every time i restart the phone its apper eror mode
func NO: 11 (recovery image)
Error NO : 2 (load Failed)

Dont worry i have a solution ?

---------- Post added at 09:29 PM ---------- Previous post was at 09:27 PM ----------

PM me those who are stucked on error mode i would love to help ?

 

[roselanguste]

hi Chisetdel31260, i see 2018.02.01 RNE-L01C432B133CUSTC432D001
RNE-L21C432B133CUSTC432D001 but my device is not rooted and after the bad experience I will not touch it anymore until I see a full ota and oreo.

That's so clear, I have waited so long for root, and 2-Weeks after root there comes a Firmware-Update! And it would be also for me, because my Firmware-Version is the same as in the Update-Description! Know Anyone a save Way to OTA-Update on Rooted Devices!?:fingers-crossed:

 

[Maniele62]

no, I do not know anyone.
I have tried in a thousand ways but nothing.

 

[Maniele62]

new update

right now

 

[Maniele62]

update ok

Rne-l01c432b133custc432d001