Root e TWRP on Huawei Mate 10 lite

Search This thread
By:
Advanced…
A

Arif Ferdian

Senior Member
Dec 10, 2016
68
13
0
what retent means?
i already tried power + vol up
power + vol down
power plus vol up and down hahahah
but nothings work,
ill try to charge until 100% then

BTW people from DC email me, told me to traid 2nd method with DC pheonix
ill try today
and ill let you know if theres something good happen


Chisetdel31260 said:
Maniele62 said:
Yes
or let it drain the battery completely.and recharge it 100%. then retent.

---------- Post added at 04:21 PM ---------- Previous post was at 04:13 PM ----------

on firmware finder, I see a new ota-mf
* 2018.02.01 RNE-L01C432B133CUSTC432D001
RNE-L21C432B133CUSTC432D001
Are somebody tested?
Click to expand...
Click to expand...
 
R

roselanguste

Senior Member
Mar 26, 2014
328
44
0
Chisetdel31260 said:
I am RNE-l21c432b130
and I use the one from ante0 ..
TWRP https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
magisk v15.3 https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
simple installation.
** bootloader code.
install TWRP.
start TWRP. INSTALL magisk 15.3 .zip
reboot.
here is

you wish to divert in stock huawei.
ok, set magisk. uninstall.
he reboots.
then with adb and fastboot, flash recovery.img stock your version. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn3bT_U5figB-6FdIh-VOwbBK8PpDjHAb15U
here is.
Click to expand...

Hello Chistel!
Can You install the new OTA-Update what is coming out for our Devices with this Steps You written here!? Have You try it!
Thanks!

---------- Post added at 09:26 AM ---------- Previous post was at 09:23 AM ----------
Maniele62 said:
right now ;)
Click to expand...

Cool! Do You notice any difference to the Firmware-Version before OTA-Update!?
Thanks!
 
M

Maniele62

Senior Member
Nov 22, 2017
88
53
0
Siracusa
Arif Ferdian said:
what retent means?
i already tried power + vol up
power + vol down
power plus vol up and down hahahah
but nothings work,
ill try to charge until 100% then

BTW people from DC email me, told me to traid 2nd method with DC pheonix
ill try today
and ill let you know if theres something good happen



no, no difference, at least for now !!!

---------- Post added at 10:55 AM ---------- Previous post was at 10:54 AM ----------
roselanguste said:
Hello Chistel!
Can You install the new OTA-Update what is coming out for our Devices with this Steps You written here!? Have You try it!
Thanks!

---------- Post added at 09:26 AM ---------- Previous post was at 09:23 AM ----------



Cool! Do You notice any difference to the Firmware-Version before OTA-Update!?
Thanks!
Click to expand...

no, no difference, at least for now !!!
Click to expand...
 
M

Maniele62

Senior Member
Nov 22, 2017
88
53
0
Siracusa
Face Unlock

Face unlock in RNE-L01C432B133CUSTC432D001
it does not work well, I've already disabled it !!!
maybe you do not like my mate :eek:

and then what is it for if I have to press power button first?
2 operations !!!
for me, the fingerprint unlock is number one
 

Attachments

  • Screenshot_20180224-170103.png
    Screenshot_20180224-170103.png
    121.7 KB · Views: 156
Last edited:
  • Like
Reactions: Chisetdel31260
A

Arif Ferdian

Senior Member
Dec 10, 2016
68
13
0
maniele, you should have to activate the pick up option first in smart ast, so you do not need to press power button to use face unlock

Maniele62 said:
Face unlock in RNE-L01C432B133CUSTC432D001
it does not work well, I've already disabled it !!!
maybe you do not like my mate :eek:

and then what is it for if I have to press power button first?
2 operations !!!
for me, the fingerprint unlock is number one
Click to expand...
 
  • Like
Reactions: Maniele62
C

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
83
toulouse
Maniele62 said:
Face unlock in RNE-L01C432B133CUSTC432D001
it does not work well, I've already disabled it !!!
maybe you do not like my mate :eek:

and then what is it for if I have to press power button first?
2 operations !!!
for me, the fingerprint unlock is number one
Click to expand...
Hello
So, you are in b133 with ota.
you were b120_ cust D001, before ??
 
W

waqas.qamar19

Member
Dec 2, 2014
10
0
0
Can you explain how we can go back to stock to receive updates or install full fw. I m new to huawei devices.
Previuosly i owned note 4 which was easy to have stock.
 
M

Matepat67

Member
Jan 8, 2018
5
0
0
Help

ginnocenti said:
Ok i send share link shortly

---------- Post added at 11:54 AM ---------- Previous post was at 11:47 AM ----------





----https://drive.google.com/file/d/1UeV05eMf52DWI-ByrngOuCaRXUU3tEzy/view?ts=5a1d3ff3
Click to expand...

Hi Gino, may you help me? I've a problem with my mate 10 lite rne-l21 dual
 
F

ffenriz

Member
Sep 12, 2014
12
1
0
flamedrops said:
hey if you are now on TWRP recovery then follow this step. download all neccessary. my phone is nova 2i just like yours i accidentally bricked it RNE-L22 but now RNE-L21 bec. of this backup that i used i restore everything except oem info and product info. follow all these steps. by the way thanks to Chisetdel31260 for his effort to this.

Quote:
Originally Posted by Chisetdel31260
dcunlocker can open FRP. https://www.dc-unlocker.com/
I managed to restore my device.
if you used unlocker for the FRP.
after redoing the bootloader code.
install TWRP. https://mega.nz/#!c1tyRL7Z!r3fhcK5eN...pc2cF-lG4guQdk
restore my backup, restore, select all except oeminfo and product. https://mega.nz/#F!lklADSZY!ORwYA7HAoVlkbjp03EoAkg
restarts.
you noticed that the camera starts but the sound, video, camera, theme boot-animation ..... does not work. (This is due to product twrp not restoring it properly)
took this meta_inf.zip, get product.ext4.win renamed it in product.img.
place it in the meta-inf zip. https://forum.xda-developers.com/sho...&postcount=452
reboot.
from twrp, install meta-inf.zip.
returned to twrp.
wipe / data format.
install supersu ante0 https://mega.nz/#!BgVwGILJ!PGq_3cupA...qHzacUxwd5m5fw
reboot.
restart in twrp.
install publiczip file from ante0. to repair theme. https://www.dropbox.com/s/6r1we6xf2d...e-l21.zip?dl=0
(this file is for rne-L21.
If you're not on RNE-L21 you need to extract zip and rename / data / hw_init / version / special_cust / RNE-21 to your model.
And open META-INF / com / google / android / updater-script in notepad ++, search and replace all RNE-21 with your model. Save and rezip and flash.)

reboot.
we now cover.
to restore the device to the origin.
twrp, restore bootext4.win that I did before being root. https://mega.nz/#F!5gl3nDzL!N8pPmT05mnWfnYyXoZFExA
restarts.
now, with adb flash recovery.img stock. https://mega.nz/#!EhkCQSCT!Pk7K-JHhn...bBK8PpDjHAb15U
then you could also lock the bootloader code.
he will reset himself. and restart all clean.
édit
ah, I forgot to say.
that you will remain dolbyatmos and viper. they are in my original backup.
no problem they are not annoying.
if you wanted to use them. (be root and install the permissive mode selinux) https://mega.nz/#F!FsUHnTbb!5J0nMtCuXIhSMzxXBOD-wQ
or delete them, be root, and with a file explorer delete them system / priv-app /.
sorry for you.
I know that I spent two days understanding everything and finding a simple solution.
I am convinced that we can do even better, but here I am tired.
Click to expand...

Hi mate..if FRP is unlock..still need use DC-UNLOCKER...
Bootloader code?can u explain..and how to flash twrp backup?
change file to zip or flash into fastboot..
? to many question..

Thanks for your reply..i'll appreciate that..
 
flamedrops

flamedrops

Senior Member
Dec 9, 2014
601
191
73
Ortigas
ffenriz said:
Hi mate..if FRP is unlock..still need use DC-UNLOCKER...
Bootloader code?can u explain..and how to flash twrp backup?
change file to zip or flash into fastboot..
to many question..

Thanks for your reply..i'll appreciate that..
Click to expand...

all you need to do is to unlock first your bootloader and intall twrp then after that make a backup and select storage sd card then twrp create a path on it and after that download all files needed just download folder as it is after you download everything then place the folder inside the twrp/backup/ name of your folder in sdcard for example mine is twrp/backups/8UEDU17A21001444/ Then inside of it my backup. Again place your sd card to your phone and go to twrp recovery then select storage sdcard then select restore, select the downloaded backup and flash everything on it except the oem and product uncheck this two. then flash it. :)

if you have already unlock your bootloader no need to use dc unlocker., all you need to do just flash twrp on fastboot mode.

and by the way there is elemental rom which is more easier to flash with, here is the link https://forum.xda-developers.com/mate-10/huawei-mate-10-lite--roms-kernels-recoveries--other-development/rom-emui-5-1-huawei-mate-10-lite-dual-t3751864
 
Last edited:
D

Diego1976

Senior Member
Mar 14, 2016
61
4
28
kilroystyx said:
Do you have a TWRP backup of your oeminfo ?
If so, now restore it!
Click to expand...

hi, I have a mate 10 lite brand Tim (rne l01) monosim and I ask if you can enable the second SIM since apparently default Huawei is born dual but in Italy is blocked by various managers ..
Does anyone know where to find a guide about it?
Thanks
 
You must log in or register to reply here.

Similar threads

M
Huawei Mate 10 Lite - To root or not to root?
Replies
1
Views
3K
Y
YoMamaLost
H
Root Huawei Mate 10 Pro with Twrp?
Replies
5
Views
3K
A
ante0
D
Magisk on huawei mate 10 lite
Replies
0
Views
577
D
Ditbenick
iHusky
Huawei Mate 10 lite [OREO] How unlock bootloader and flash TWRP?
Replies
0
Views
462
iHusky
iHusky
K
huawei mate 10 lite
Replies
12
Views
3K
B
bbmadzky

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 6
    A
    Aonja
    TWRP - https://drive.google.com/file/d/0B14UlTZksRqnWFBkZmtHVWNDUms/view?usp=sharing
    Root - https://drive.google.com/file/d/0B14UlTZksRqnWFNaekdkUU9ULTQ/view?usp=sharing
    everything work fine except not encryption support so require sdcard.
    View
    5
    M
    Maniele62
    huawei mate 10 lite full backup

    Finally I managed to solve the problem of the full backup from twrp "data" included, it is very easy but you will lose every userdata file.
    1. Start huawei mate 10 lite in recovery twrp
    2. Wipe ----> advanced wipe
    3. Check "DATA"
    4. Repair or Change File System
    5. Change File System
    6. EXT4 ( mine is f2fs)
    7. ------> swipe to change
    8. F2FS
    9. ------> swipe to change
    now the smartphone will be like new but the backup will work 100%
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 03:59 PM ---------- Previous post was at 03:58 PM ----------
    roselanguste said:
    Works TWRP fully functional on Your Device!? I mean, can You make full Nandroid-Backup with TWRP (All Partitions)!? I have the same Device, but have not rooted, because OTA-Firmware-Update don't work anymore after root, and I don't want to lose the ability for OTA-Firmware-Updates!
    Thanks!
    Click to expand...

    hi Roselanguste, see my last post!!!!!!!!!!!!!!!
    View
    5
    M
    Maniele62
    Huawei Mate 10 Lite: Unlock bootloader, root, format data and full twrp backup.

    1. see this link for Unlock the bootloader and root Huawei Mate 10 Lite: https://forum.xda-developers.com/showpost.php?p=74741194&postcount=195
    2. copy in the adb/fastboot folder
    https://mega.nz/#!UMgxXL4K!HOeRC9Si3kexiKNgNe7PH40Fc-dehv6iQcu6qLd23xY
    this twrp.img: https://mega.nz/#!JRQEiKDB!0R458sPw1Gk2GHdJnvd8QAPg5LQ8ClqxQdR-0nZ8RGA
    3. copy in the external sdcard this supersu kindly offered by ante0:
    https://mega.nz/#!IVZQxILR!rRJjcMNnT4Vq4od62hcyiZHHAPkqF4tpyEKDdQ0Sj3Y
    3. Uninstall from device the supersu if it exists.
    4. flash from adb folder terminal the twrp.img
    5. reboot in recovery
    6. wipe - format data - yes
    7. install from sdcard the attached supersu
    8. reboot
    10. enjoy ;)
    Now you can do all the full backups you want

    We accept thanks :angel:

    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***
    View
    4
    M
    Maniele62
    Procedure for Unlock the bootloader and root my Huawei Mate 10 Lite

    From the phone click on Settings> Phone Info and then seven times on the item Number Build;
    Go back and enter the new Developer Options menu;
    Enable the USB debugging and OEM Unlock options;
    Using the computer, download and install the ADB drivers;
    Now create an account or (if you have not already) connected to the site emui.huawei.com;
    Accept the terms and conditions at the end of the page and press the Next button;
    Fill out the form with the required data and press on the Commit button;
    Keep the code you will receive;
    At this point enter the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + power for 10 seconds to put the phone in reboot bootloader
    Write "fastboot oem unlock received code";
    Now type "fastboot reboot".
    copy the zipped SuperSu file to the phone's sd card;
    copy the twrp.img to the folder with the ADB drivers;
    enter in the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + down for 10 seconds to put the phone in reboot bootloader;
    now type:
    fastboot devices
    fastboot flash recovery twrp.img
    turn off the phone
    hold down vol + and power until twrp starts
    at this point the twrp opens
    - Swipe to allow modification
    - Install
    - Select Storage
    - External Storage
    - SuperSu
    - Reboot System
    That's all
    A big thank you to Aonja for her support in creating the twrp.img file for me.
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 08:55 AM ---------- Previous post was at 08:38 AM ----------
    Aonja said:
    Code: 
    <Profile name="Huawei Nova 2i (RNE-L22)" author="Aonja">
    <Files>
      <File type="SHA256RSA" filetype="signature">00.SHA256RSA.IMG</File>
      <File type="CRC" filetype="checksum">01.CRC.IMG</File>
      <File type="CURVER" filetype="unknown">02.CURVER.IMG</File>
      <File type="EFI" filetype="unknown">03.EFI.IMG</File>
      <File type="VERLIST" filetype="unknown">04.VERLIST.IMG</File>
      <File type="XLOADER" filetype="unknown">05.XLOADER.IMG</File>
      <File type="PACKAGE_TYPE" filetype="unknown">06.PACKAGE_TYPE.IMG</File>
      <File type="boot" partition="/dev/block/mmcblk0p28">boot.img</File>
      <File type="bootfail_info" partition="/dev/block/mmcblk0p41">bootfail_info.img</File>
      <File type="cache" partition="/dev/block/mmcblk0p36">cache.img</File>
      <File type="cust" partition="/dev/block/mmcblk0p45">cust.img</File>
      <File type="dfx" partition="/dev/block/mmcblk0p34">dfx.img</File>
      <File type="dts" partition="/dev/block/mmcblk0p30">dts.img</File>
      <File type="fastboot" partition="/dev/block/mmcblk0p5">fastboot.img</File>
      <File type="frp" partition="/dev/block/mmcblk0p4">frp.img</File>
      <File type="fw_hifi" partition="/dev/block/mmcblk0p27">fw_hifi.img</File>
      <File type="fw_lpm3" partition="/dev/block/mmcblk0p3">fw_lpm3.img</File>
      <File type="hisitest0" partition="/dev/block/mmcblk0p37">hisitest0.img</File>
      <File type="hisitest1" partition="/dev/block/mmcblk0p38">hisitest1.img</File>
      <File type="hisitest2" partition="/dev/block/mmcblk0p39">hisitest2.img</File>
      <File type="misc" partition="/dev/block/mmcblk0p20">misc.img</File>
      <File type="modem_fw" partition="/dev/block/mmcblk0p31">modem_fw.img</File>
      <File type="modem_om" partition="/dev/block/mmcblk0p18">modem_om.img</File>
      <File type="modem_secure" partition="/dev/block/mmcblk0p17">modem_secure.img</File>
      <File type="modemnvm_backup" partition="/dev/block/mmcblk0p10">modemnvm_backup.img</File>
      <File type="modemnvm_factory" partition="/dev/block/mmcblk0p6">modemnvm_factory.img</File>
      <File type="modemnvm_img" partition="/dev/block/mmcblk0p11">modemnvm_img.img</File>
      <File type="modemnvm_system" partition="/dev/block/mmcblk0p12">modemnvm_system.img</File>
      <File type="modemnvm_update" partition="/dev/block/mmcblk0p21">modemnvm_update.img</File>
      <File type="nvme" partition="/dev/block/mmcblk0p7">nvme.img</File>
      <File type="oeminfo" partition="/dev/block/mmcblk0p8">oeminfo.img</File>
      <File type="patch" partition="/dev/block/mmcblk0p40">patch.img</File>
      <File type="persist" partition="/dev/block/mmcblk0p16">persist.img</File>
      <File type="product" partition="/dev/block/mmcblk0p48">product.img</File>
      <File type="recovery" partition="/dev/block/mmcblk0p29">recovery.img</File>
      <File type="recovery2" partition="/dev/block/mmcblk0p22">recovery2.img</File>
      <File type="reserved2" partition="/dev/block/mmcblk0p23">reserved2.img</File>
      <File type="reserved3" partition="/dev/block/mmcblk0p9">reserved3.img</File>
      <File type="reserved4" partition="/dev/block/mmcblk0p14">reserved4.img</File>
      <File type="reserved5" partition="/dev/block/mmcblk0p15">reserved5.img</File>
      <File type="reserved7" partition="/dev/block/mmcblk0p32">reserved7.img</File>
      <File type="reserved8" partition="/dev/block/mmcblk0p33">reserved8.img</File>
      <File type="reserved9" partition="/dev/block/mmcblk0p43">reserved9.img</File>
      <File type="rrecord" partition="/dev/block/mmcblk0p42">rrecord.img</File>
      <File type="securety_storage" partition="/dev/block/mmcblk0p13">securety_storage.img</File>
      <File type="sensorhub" partition="/dev/block/mmcblk0p26">sensorhub.img</File>
      <File type="splash2" partition="/dev/block/mmcblk0p19">splash2.img</File>
      <File type="system" partition="/dev/block/mmcblk0p44">system.img</File>
      <File type="teeos" partition="/dev/block/mmcblk0p24">teeos.img</File>
      <File type="trustfirmware" partition="/dev/block/mmcblk0p25">trustfirmware.img</File>
      <File type="userdata" partition="/dev/block/mmcblk0p49">userdata.img</File>
      <File type="vbmeta" partition="/dev/block/mmcblk0p35">vbmeta.img</File>
      <File type="vendor" partition="/dev/block/mmcblk0p47">vendor.img</File>
      <File type="version" partition="/dev/block/mmcblk0p46">version.img</File>
      <File type="vrl" partition="/dev/block/mmcblk0p1">vrl.img</File>
      <File type="vrl_backup" partition="/dev/block/mmcblk0p2">vrl_backup.img</File>
    </Files>
  </Profile>
    for [TOOL] Huawei Update Extractor
    https://forum.xda-developers.com/showthread.php?t=2433454

    ---------- Post added at 07:20 PM ---------- Previous post was at 07:00 PM ----------



    L21
    https://drive.google.com/file/d/1J903TsF2aXTp4kVgAvTVO7HYUIIzlg0a/view?usp=sharing
    Click to expand...

    Maniele62 said:
    OK, tomorrow I post my procedure.
    Now is too late, I am Italian, excuse my English.
    Click to expand...

    Hi Roselanguste, see my post
    View
    3
    A
    Aonja
    AL_IRAQI said:
    Yes
    Click to expand...

    i ported twrp and rooted + xposed done, my device is nova 2i. if it same i will share it soon.
    View

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone