Root e TWRP on Huawei Mate 10 lite

Search This thread

roselanguste

Senior Member
Mar 26, 2014
328
44
0
I tried installing TWRP yesterday, and my Windows PowerShell tells me I flashed it correctly, but when I try booting to it, I always end up in erecovery.
Is there a way to boot into TWRP? When I try to boot to recovery I only get the screen with the three options (Your devices is unlocked and can't be trusted,... then the three options depending on what button I push).
Or I'm just stupid and I read over something.


I think there is something going wrong by Flashing the TWRP!? I had this also in the past a few times on other Devices, and Flash it again has always solved it!
 

Diego1976

Senior Member
Mar 14, 2016
61
4
28
hi guys I wanted to ask if anyone tried to switch from Rne-L01 (mono sim) to Rne-L21 (dual SIM); I need two cards and if someone can give me a guide .. I thank you very much
 

roselanguste

Senior Member
Mar 26, 2014
328
44
0
C432B134 (L01/L21) was uploaded to hwmt.ru 3 days ago, and it's a FullOTA.
But you'd still need a Nocheck recovery to flash it... Haven't checked if it can be used with dload yet. But chances are high it won't.

Can You Please, Please, Please make a link here to the Full Firmware!?
Thanks!

Edit: Have found it! Also Firmware-Finder-App show the Full Firmware now! That's Awesome!
Thanks!
 
Last edited:

ante0

Senior Member
Dec 28, 2009
3,207
1,576
243
Stockholm
Thank You Very Much! You are Awesome!

---------- Post added at 02:51 PM ---------- Previous post was at 02:48 PM ----------



Can You say me, why the Firmware-File in Your link has only over 600MB, but the Firmware-Finder-App shows over 2GB Size!?
Thanks!


It's the same files. Firmware finder might show all 3 combined though, not sure.
You'd have to dl update.zip, update_data_full_public.zip and the hw data for L01 or L21.

Firmware finder is hwmt.ru/pro-teammt.ru.
 
  • Like
Reactions: roselanguste

Maniele62

Senior Member
Nov 22, 2017
88
53
0
Siracusa
C432B134 (L01/L21) was uploaded to hwmt.ru 3 days ago, and it's a FullOTA.
But you'd still need a Nocheck recovery to flash it... Haven't checked if it can be used with dload yet. But chances are high it won't.
Thank you, I have see, but when I verify whit IMEI firmware finder say not approved
 
Last edited:

lvbaal

Senior Member
Jun 27, 2009
288
50
48
Borkenes
I tried installing TWRP yesterday, and my Windows PowerShell tells me I flashed it correctly, but when I try booting to it, I always end up in erecovery.
Is there a way to boot into TWRP? When I try to boot to recovery I only get the screen with the three options (Your devices is unlocked and can't be trusted,... then the three options depending on what button I push).
Or I'm just stupid and I read over something.
Last paragraph on https://twrp.me/huawei/huaweimate10pro.html :

Note many devices will replace your custom recovery automatically during first boot. To prevent this, use google to find the proper key combo to enter recovery. After typing reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
 
Last edited:

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
83
toulouse
hello
not after several attempts, he does not want to go.
b134, still 5%.
I will rediscover in b130 to test.

edict
with b130, 5% fail.

edit.
I broke down,
I went back to B133 and I unpacked B134 with Huawei Extrator.
i got boot, system, cust, product, vendor and version.
I have all flash.
and the result. I am b134.
 

Attachments

  • 2018-03-18-00-29-20.png
    2018-03-18-00-29-20.png
    156.1 KB · Views: 288
  • 2018-03-18-00-29-39.png
    2018-03-18-00-29-39.png
    172.2 KB · Views: 282
Last edited:
  • Like
Reactions: roselanguste

roselanguste

Senior Member
Mar 26, 2014
328
44
0
hello
not after several attempts, he does not want to go.
b134, still 5%.
I will rediscover in b130 to test.

edict
with b130, 5% fail.

edit.
I broke down,
I went back to B133 and I unpacked B134 with Huawei Extrator.
i got boot, system, cust, product, vendor and version.
I have all flash.
and the result. I am b134.

YEAH!!! Have You Loose any Datas, and Please Please Please, write the steps to make it!:highfive:
Thanks!

---------- Post added at 10:54 AM ---------- Previous post was at 10:32 AM ----------

I don't know how I have overseeing it, but KingofMezi has linked the full stock firmware (RNE-L21-C432-B130) a few days ago! So we have the Stock-B134 (Huawei-Firmware-finder-app), and the Stock B130 (KingofMezi)! Very Cool!
Like I wrote above, the B134 You get over Huawei-Firmware-finder-app, and for the B130 here is the link:

https://forum.xda-developers.com/ma...pilation-firmware-flasheables-huawei-t3761483
 

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
83
toulouse
YEAH!!! Have You Loose any Datas, and Please Please Please, write the steps to make it!:highfive:
Thanks!

---------- Post added at 10:54 AM ---------- Previous post was at 10:32 AM ----------

I don't know how I have overseeing it, but KingofMezi has linked the full stock firmware (RNE-L21-C432-B130) a few days ago! So we have the Stock-B134 (Huawei-Firmware-finder-app), and the Stock B130 (KingofMezi)! Very Cool!
Like I wrote above, the B134 You get over Huawei-Firmware-finder-app, and for the B130 here is the link:

https://forum.xda-developers.com/ma...pilation-firmware-flasheables-huawei-t3761483

regard https://forum.xda-developers.com/showpost.php?p=75929318&postcount=27
 
  • Like
Reactions: roselanguste

Chisetdel31260

Senior Member
Jun 21, 2016
1,078
332
83
toulouse
This Firmware was the first full available, a time ago, and I have found out that it is a Chinese-Stock-Version!

Well, I looked at him more closely.
* he is google security october 2017.
On the inside there is a rollback and beta-test information.
so, I assume, it's a rollback for the Chinese version of face unlock.
so without interest for us.
 

N.ORMs

Member
Apr 26, 2017
32
6
0
7th Cloud
Hey guys. I don't know whether this has been asked or not. my question is can i use/update rne-l21 full ota (mate 10 lite) on my rne-l22 (nova 2i)? i know both of them are the same (dual-sim). Do i need specific instruction to do that? Is it possible?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    huawei mate 10 lite full backup

    Finally I managed to solve the problem of the full backup from twrp "data" included, it is very easy but you will lose every userdata file.
    1. Start huawei mate 10 lite in recovery twrp
    2. Wipe ----> advanced wipe
    3. Check "DATA"
    4. Repair or Change File System
    5. Change File System
    6. EXT4 ( mine is f2fs)
    7. ------> swipe to change
    8. F2FS
    9. ------> swipe to change
    now the smartphone will be like new but the backup will work 100%
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 03:59 PM ---------- Previous post was at 03:58 PM ----------

    Works TWRP fully functional on Your Device!? I mean, can You make full Nandroid-Backup with TWRP (All Partitions)!? I have the same Device, but have not rooted, because OTA-Firmware-Update don't work anymore after root, and I don't want to lose the ability for OTA-Firmware-Updates!
    Thanks!

    hi Roselanguste, see my last post!!!!!!!!!!!!!!!
    5
    Huawei Mate 10 Lite: Unlock bootloader, root, format data and full twrp backup.

    1. see this link for Unlock the bootloader and root Huawei Mate 10 Lite: https://forum.xda-developers.com/showpost.php?p=74741194&postcount=195
    2. copy in the adb/fastboot folder
    https://mega.nz/#!UMgxXL4K!HOeRC9Si3kexiKNgNe7PH40Fc-dehv6iQcu6qLd23xY
    this twrp.img: https://mega.nz/#!JRQEiKDB!0R458sPw1Gk2GHdJnvd8QAPg5LQ8ClqxQdR-0nZ8RGA
    3. copy in the external sdcard this supersu kindly offered by ante0:
    https://mega.nz/#!IVZQxILR!rRJjcMNnT4Vq4od62hcyiZHHAPkqF4tpyEKDdQ0Sj3Y
    3. Uninstall from device the supersu if it exists.
    4. flash from adb folder terminal the twrp.img
    5. reboot in recovery
    6. wipe - format data - yes
    7. install from sdcard the attached supersu
    8. reboot
    10. enjoy ;)
    Now you can do all the full backups you want

    We accept thanks :angel:

    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***
    4
    Procedure for Unlock the bootloader and root my Huawei Mate 10 Lite

    From the phone click on Settings> Phone Info and then seven times on the item Number Build;
    Go back and enter the new Developer Options menu;
    Enable the USB debugging and OEM Unlock options;
    Using the computer, download and install the ADB drivers;
    Now create an account or (if you have not already) connected to the site emui.huawei.com;
    Accept the terms and conditions at the end of the page and press the Next button;
    Fill out the form with the required data and press on the Commit button;
    Keep the code you will receive;
    At this point enter the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + power for 10 seconds to put the phone in reboot bootloader
    Write "fastboot oem unlock received code";
    Now type "fastboot reboot".
    copy the zipped SuperSu file to the phone's sd card;
    copy the twrp.img to the folder with the ADB drivers;
    enter in the folder with the ADB drivers;
    Holding down the SHIFT key, click the right mouse button;
    Select the Open command window option here;
    turn off the phone and connect it to the PC via USB, hold down volume + down for 10 seconds to put the phone in reboot bootloader;
    now type:
    fastboot devices
    fastboot flash recovery twrp.img
    turn off the phone
    hold down vol + and power until twrp starts
    at this point the twrp opens
    - Swipe to allow modification
    - Install
    - Select Storage
    - External Storage
    - SuperSu
    - Reboot System
    That's all
    A big thank you to Aonja for her support in creating the twrp.img file for me.
    *** ATTENTION: Follow the procedure at your own risk. I do not take responsibility for any problems with your smartphone. ***

    ---------- Post added at 08:55 AM ---------- Previous post was at 08:38 AM ----------

    Code:
    <Profile name="Huawei Nova 2i (RNE-L22)" author="Aonja">
        <Files>
          <File type="SHA256RSA" filetype="signature">00.SHA256RSA.IMG</File>
          <File type="CRC" filetype="checksum">01.CRC.IMG</File>
          <File type="CURVER" filetype="unknown">02.CURVER.IMG</File>
          <File type="EFI" filetype="unknown">03.EFI.IMG</File>
          <File type="VERLIST" filetype="unknown">04.VERLIST.IMG</File>
          <File type="XLOADER" filetype="unknown">05.XLOADER.IMG</File>
          <File type="PACKAGE_TYPE" filetype="unknown">06.PACKAGE_TYPE.IMG</File>
          <File type="boot" partition="/dev/block/mmcblk0p28">boot.img</File>
          <File type="bootfail_info" partition="/dev/block/mmcblk0p41">bootfail_info.img</File>
          <File type="cache" partition="/dev/block/mmcblk0p36">cache.img</File>
          <File type="cust" partition="/dev/block/mmcblk0p45">cust.img</File>
          <File type="dfx" partition="/dev/block/mmcblk0p34">dfx.img</File>
          <File type="dts" partition="/dev/block/mmcblk0p30">dts.img</File>
          <File type="fastboot" partition="/dev/block/mmcblk0p5">fastboot.img</File>
          <File type="frp" partition="/dev/block/mmcblk0p4">frp.img</File>
          <File type="fw_hifi" partition="/dev/block/mmcblk0p27">fw_hifi.img</File>
          <File type="fw_lpm3" partition="/dev/block/mmcblk0p3">fw_lpm3.img</File>
          <File type="hisitest0" partition="/dev/block/mmcblk0p37">hisitest0.img</File>
          <File type="hisitest1" partition="/dev/block/mmcblk0p38">hisitest1.img</File>
          <File type="hisitest2" partition="/dev/block/mmcblk0p39">hisitest2.img</File>
          <File type="misc" partition="/dev/block/mmcblk0p20">misc.img</File>
          <File type="modem_fw" partition="/dev/block/mmcblk0p31">modem_fw.img</File>
          <File type="modem_om" partition="/dev/block/mmcblk0p18">modem_om.img</File>
          <File type="modem_secure" partition="/dev/block/mmcblk0p17">modem_secure.img</File>
          <File type="modemnvm_backup" partition="/dev/block/mmcblk0p10">modemnvm_backup.img</File>
          <File type="modemnvm_factory" partition="/dev/block/mmcblk0p6">modemnvm_factory.img</File>
          <File type="modemnvm_img" partition="/dev/block/mmcblk0p11">modemnvm_img.img</File>
          <File type="modemnvm_system" partition="/dev/block/mmcblk0p12">modemnvm_system.img</File>
          <File type="modemnvm_update" partition="/dev/block/mmcblk0p21">modemnvm_update.img</File>
          <File type="nvme" partition="/dev/block/mmcblk0p7">nvme.img</File>
          <File type="oeminfo" partition="/dev/block/mmcblk0p8">oeminfo.img</File>
          <File type="patch" partition="/dev/block/mmcblk0p40">patch.img</File>
          <File type="persist" partition="/dev/block/mmcblk0p16">persist.img</File>
          <File type="product" partition="/dev/block/mmcblk0p48">product.img</File>
          <File type="recovery" partition="/dev/block/mmcblk0p29">recovery.img</File>
          <File type="recovery2" partition="/dev/block/mmcblk0p22">recovery2.img</File>
          <File type="reserved2" partition="/dev/block/mmcblk0p23">reserved2.img</File>
          <File type="reserved3" partition="/dev/block/mmcblk0p9">reserved3.img</File>
          <File type="reserved4" partition="/dev/block/mmcblk0p14">reserved4.img</File>
          <File type="reserved5" partition="/dev/block/mmcblk0p15">reserved5.img</File>
          <File type="reserved7" partition="/dev/block/mmcblk0p32">reserved7.img</File>
          <File type="reserved8" partition="/dev/block/mmcblk0p33">reserved8.img</File>
          <File type="reserved9" partition="/dev/block/mmcblk0p43">reserved9.img</File>
          <File type="rrecord" partition="/dev/block/mmcblk0p42">rrecord.img</File>
          <File type="securety_storage" partition="/dev/block/mmcblk0p13">securety_storage.img</File>
          <File type="sensorhub" partition="/dev/block/mmcblk0p26">sensorhub.img</File>
          <File type="splash2" partition="/dev/block/mmcblk0p19">splash2.img</File>
          <File type="system" partition="/dev/block/mmcblk0p44">system.img</File>
          <File type="teeos" partition="/dev/block/mmcblk0p24">teeos.img</File>
          <File type="trustfirmware" partition="/dev/block/mmcblk0p25">trustfirmware.img</File>
          <File type="userdata" partition="/dev/block/mmcblk0p49">userdata.img</File>
          <File type="vbmeta" partition="/dev/block/mmcblk0p35">vbmeta.img</File>
          <File type="vendor" partition="/dev/block/mmcblk0p47">vendor.img</File>
          <File type="version" partition="/dev/block/mmcblk0p46">version.img</File>
          <File type="vrl" partition="/dev/block/mmcblk0p1">vrl.img</File>
          <File type="vrl_backup" partition="/dev/block/mmcblk0p2">vrl_backup.img</File>
        </Files>
      </Profile>
    for [TOOL] Huawei Update Extractor
    https://forum.xda-developers.com/showthread.php?t=2433454

    ---------- Post added at 07:20 PM ---------- Previous post was at 07:00 PM ----------



    L21
    https://drive.google.com/file/d/1J903TsF2aXTp4kVgAvTVO7HYUIIzlg0a/view?usp=sharing

    OK, tomorrow I post my procedure.
    Now is too late, I am Italian, excuse my English.

    Hi Roselanguste, see my post
    3

    i ported twrp and rooted + xposed done, my device is nova 2i. if it same i will share it soon.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone