Update ver 10d h830; Thank guide of @1619415
ROOT CONFIRMED + How To Root Guide!
How to:
Step 1) Install LGUP H830_DLL and LG Mobile Driver Once all 3 have installed on your PC, reboot your PC
Step 2) Download the Rooted 10D TOT and extract it (if you don't have software that can handle a RAR file, I recommend you use 7-Zip)
Step 3) Power your G5 off (or pull out the Battery) then connect your charger to your PC. Once your charger is plugged it, plug it into your device while holding the volume up button. This will place your device into "Download Mode". Now open LGUP (Run as administrator) then make sure to select your device. Once you've selected your device, select "UPGRADE" then in the section below it, click the File Path area and select the TOT you got from extracting the RAR and click "Start".
Step 4) As your device begins to flash, download DM-Verity Disabler and SuperSU
Step 5) Once your device reboots, pull the battery out of it for about 5 seconds then put it back into the device and enter TWRP (Hold volume down + power button and make sure to hold it as the device boots then after about 1 second release the power button and push it down again, then say "Yes" to factory reset for both prompts). Once in TWRP wipe your data partition TWICE (wipe > advanced > Data) then install SuperSU and DM-Verify Disabler.
Step 6) Reboot
Note: If you get stuck inside of TWRP (even though your reboot, you boot back into TWRP) run these commands in the terminal (Advanced > Terminal)
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
reboot
Donated: [email protected]
@kwkw480 thank with 20$ donate
ROOT CONFIRMED + How To Root Guide!
How to:
Step 1) Install LGUP H830_DLL and LG Mobile Driver Once all 3 have installed on your PC, reboot your PC
Step 2) Download the Rooted 10D TOT and extract it (if you don't have software that can handle a RAR file, I recommend you use 7-Zip)
Step 3) Power your G5 off (or pull out the Battery) then connect your charger to your PC. Once your charger is plugged it, plug it into your device while holding the volume up button. This will place your device into "Download Mode". Now open LGUP (Run as administrator) then make sure to select your device. Once you've selected your device, select "UPGRADE" then in the section below it, click the File Path area and select the TOT you got from extracting the RAR and click "Start".
Step 4) As your device begins to flash, download DM-Verity Disabler and SuperSU
Step 5) Once your device reboots, pull the battery out of it for about 5 seconds then put it back into the device and enter TWRP (Hold volume down + power button and make sure to hold it as the device boots then after about 1 second release the power button and push it down again, then say "Yes" to factory reset for both prompts). Once in TWRP wipe your data partition TWICE (wipe > advanced > Data) then install SuperSU and DM-Verify Disabler.
Step 6) Reboot
Note: If you get stuck inside of TWRP (even though your reboot, you boot back into TWRP) run these commands in the terminal (Advanced > Terminal)
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
reboot
Donated: [email protected]
@kwkw480 thank with 20$ donate
Last edited:
