Root H830 WITH TOT file

Search This thread

tungkick

Senior Member
Nov 21, 2012
489
848
Update ver 10d h830; Thank guide of @1619415
ROOT CONFIRMED + How To Root Guide!
How to:

Step 1) Install LGUP H830_DLL and LG Mobile Driver Once all 3 have installed on your PC, reboot your PC

Step 2) Download the Rooted 10D TOT and extract it (if you don't have software that can handle a RAR file, I recommend you use 7-Zip)

Step 3) Power your G5 off (or pull out the Battery) then connect your charger to your PC. Once your charger is plugged it, plug it into your device while holding the volume up button. This will place your device into "Download Mode". Now open LGUP (Run as administrator) then make sure to select your device. Once you've selected your device, select "UPGRADE" then in the section below it, click the File Path area and select the TOT you got from extracting the RAR and click "Start".

Step 4) As your device begins to flash, download DM-Verity Disabler and SuperSU

Step 5) Once your device reboots, pull the battery out of it for about 5 seconds then put it back into the device and enter TWRP (Hold volume down + power button and make sure to hold it as the device boots then after about 1 second release the power button and push it down again, then say "Yes" to factory reset for both prompts). Once in TWRP wipe your data partition TWICE (wipe > advanced > Data) then install SuperSU and DM-Verify Disabler.

Step 6) Reboot

Note: If you get stuck inside of TWRP (even though your reboot, you boot back into TWRP) run these commands in the terminal (Advanced > Terminal)

dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
reboot


Donated: Tungkick777@yahoo.com
@kwkw480 thank with 20$ donate
 
Last edited:

Stankydanky702

Senior Member
Oct 11, 2012
111
34
Las Vegas
- LGUP FOR G5: - LGUP_Lab_Frame_Ver_1_11.msi
- DLL H830: LGH830_DLL.msi
- Suppersu: Download
- Disbable DM-verify: Download
- File TOT full add twrp H830: Download

Download all:
1. Install LGUP + DLL H830.
2. Put phone downloadmod ( turn of phone> hold volume up connect cable)
3. Open LGUP> Choose UPGRADE > choose file tot extract h830> Start
4. Put phone twrp> flash supper su + dm-verify> reboot >Done

Quote:
- IF phone bootloop twrp
Use command adb shell fix:
adb shell
su
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
reboot

Done

13221083_1383644888318999_3551454759169647975_n.jpg

Donated: Click Thank you for much
How do we know this works

Sent from my LG-H830 using XDA-Developers mobile app
 

kwkw480

Senior Member
Sep 18, 2009
521
217
just flash mine. let the development begin!! thank you just let me know where to pay my pledge :)
 

waylo

Senior Member
May 9, 2010
1,670
489
Last edited:

kcsevo

Senior Member
Jul 5, 2011
541
119
I'm sorry if this is a noob question. Do you use the flash tool 2.0.16 to do this?

Sent from my LG-H830 using Tapatalk
 

tungkick

Senior Member
Nov 21, 2012
489
848
Do we have a way to restore completely to stock?

I'm guessing we take the original TOT file from here, courtesy of @arjuna_:
http://xdaforums.com/showpost.php?p=66901524&postcount=500
https://drive.google.com/file/d/0Bw8q3gbmF0GnTlk0UDlaWENOTUE/view

and LG-Up it back?

EDIT:
For the bounty, I'm happily giving to @tungkick and also kicking in extra to @arjuna_ and @wolfu11
Sorry arjuna's phone had to take one for the team. Hope you get it back soon enough.
YES STOCK full
https://drive.google.com/file/d/0Bw8q3gbmF0GnTlk0UDlaWENOTUE/view?pref=2&pli=1
 
  • Like
Reactions: deadbanana0717

kchannel9

Senior Member
Dec 24, 2011
1,034
298
California
Thank You!! and MD5 / SHA-1

@tungkick thank you so much! @wolfu11 and @arjuna_ / @ArJuna (hehe), you both as well! I am updating the LG G5 Root/TWRP Bounty thread right now, I will say to donate to tungkick and also to you two as well if people want to contribute more, does that sound correct?

Also was wondering if someone could provide/confirm MD5 or SHA-1 checksums for these 3 flashable files, here's what I get:

- Disbable DM-verify (no-verity-opt-encrypt.zip)
MD5: 4ebba8d116bf08b3eb47c4c4f73aaf12
SHA-1: 2663bcc9228907aa2e4a9336b3fb1d8264bc1391

- File TOT full add twrp H830 (LGH830AT-01-V10a-310-260-MAR-04-2016-ARB00+0FULLROOT.tot extracted from the rar of the same name)
MD5: 819b6d8cccb82909fedc390ba88570e2
SHA-1: 58c965ea1142c633aaaf7c196c629805fda03f06

- File TOT stock full h830 (LGH830AT-00-V10a-TMO-US-MAR-04-2016-ARB00+FULL.tot)
MD5: 07881CA1D4760D07E60E39F197570981
SHA-1: DA735E26FCCD3A2B80D37FEA633B3D434D4E9D45





---------- Post added at 03:39 AM ---------- Previous post was at 03:02 AM ----------

Which drivers are needed? I installed "LGUP FOR G5: - LGUP_Lab_Frame_Ver_1_11.msi" and "DLL H830: LGH830_DLL.msi" but get this error when running LGUP:

GGaJi89.png
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 66
    Update ver 10d h830; Thank guide of @1619415
    ROOT CONFIRMED + How To Root Guide!
    How to:

    Step 1) Install LGUP H830_DLL and LG Mobile Driver Once all 3 have installed on your PC, reboot your PC

    Step 2) Download the Rooted 10D TOT and extract it (if you don't have software that can handle a RAR file, I recommend you use 7-Zip)

    Step 3) Power your G5 off (or pull out the Battery) then connect your charger to your PC. Once your charger is plugged it, plug it into your device while holding the volume up button. This will place your device into "Download Mode". Now open LGUP (Run as administrator) then make sure to select your device. Once you've selected your device, select "UPGRADE" then in the section below it, click the File Path area and select the TOT you got from extracting the RAR and click "Start".

    Step 4) As your device begins to flash, download DM-Verity Disabler and SuperSU

    Step 5) Once your device reboots, pull the battery out of it for about 5 seconds then put it back into the device and enter TWRP (Hold volume down + power button and make sure to hold it as the device boots then after about 1 second release the power button and push it down again, then say "Yes" to factory reset for both prompts). Once in TWRP wipe your data partition TWICE (wipe > advanced > Data) then install SuperSU and DM-Verify Disabler.

    Step 6) Reboot

    Note: If you get stuck inside of TWRP (even though your reboot, you boot back into TWRP) run these commands in the terminal (Advanced > Terminal)

    dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
    dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
    reboot


    Donated: Tungkick777@yahoo.com
    @kwkw480 thank with 20$ donate
    11
    Great work! I am curious, does this open the way for custom roms or will we only be able to use stock rooted?

    My time has been incredibly limited but I'm hoping to bring a custom rooted stock rom and something Aosp/cm related up eventually. I just don't know when I'll have substantial time - I still haven't rooted my g5, lol. Work/school/life has been hectic for months. But considering that I own the h830, that's the only thing I'll be building for. ;)
    10
    ROOT CONFIRMED + How To Root Guide!

    Screenshot_2016-07-15-00-03-24.jpg

    How to:

    Step 1) Install LGUP H830_DLL and LG Mobile Driver Once all 3 have installed on your PC, reboot your PC

    Step 2) Download the Rooted 10D TOT and extract it (if you don't have software that can handle a RAR file, I recommend you use 7-Zip)

    Step 3) Power your G5 off (or pull out the Battery) then connect your charger to your PC. Once your charger is plugged it, plug it into your device while holding the volume up button. This will place your device into "Download Mode". Now open LGUP (Run as administrator) then make sure to select your device. Once you've selected your device, select "UPGRADE" then in the section below it, click the File Path area and select the TOT you got from extracting the RAR and click "Start".

    Step 4) As your device begins to flash, download DM-Verity Disabler and SuperSU

    Step 5) Once your device reboots, pull the battery out of it for about 5 seconds then put it back into the device and enter TWRP (Hold volume down + power button and make sure to hold it as the device boots then after about 1 second release the power button and push it down again, then say "Yes" to factory reset for both prompts). Once in TWRP wipe your data partition TWICE (wipe > advanced > Data) then install SuperSU and DM-Verify Disabler.

    Step 6) Reboot

    Note: If you get stuck inside of TWRP (even though your reboot, you boot back into TWRP) run these commands in the terminal (Advanced > Terminal)

    dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/misc
    dd if=/dev/zero of=/dev/block/platform/624000.ufshc/by-name/fota
    reboot
    10
    I don't mean to be a bother but does anyone have a video of themselves rooting their G5? For some reason my phone does recognize itself but can't get adb working.

    Sent from my LG-H830 using XDA-Developers mobile app

    Here ya go

    https://www.youtube.com/watch?v=9YiFOYa2L9g

    ---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------

    do we have an exact source on who created the modified TOT file we're putting on the phone via LGup? Just want to know what was done to make it root-able

    Tungkick created the modified tot based off of a stock tot arjuna_ had created off his fully wiped phone, at a repair shop. At that time he had a stock recovery tot made and I packed twrp into the stock tot. Tungkick put it all together and made it a full flashable tot with twrp recovery. He worked his magic just as he did for the V10 community.
    7
    How do we know this works

    Sent from my LG-H830 using XDA-Developers mobile app

    Here ya go :)

    IMG_20160209_075853.jpg

    IMG_20160523_015533.jpg