• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROOT] Samsung Galaxy J2 Prime G532F, G532M, G532G, SuperSU Root SM-G532F/M/G

Search This thread

amirelshater

Member
Dec 23, 2016
6
2
-This is a simple post to share my insecure boot and script to root SM-G532M
-This is the only and first in the world metod to supersu root SM-G532M

Process:
Download "ROOT-G532M.zip", uncompress, run ROOT.exe and folow the steps!
After process finish and phone reboots go to SuperSU and update the binary

https://youtu.be/nErvb6rBM40

-To unroot use "full unroot" from SuperSU settings and flash "View attachment 3975193" with odin.

Credits:
@Chainfire for SuperSU
@hernankano the rest


Thanks hernankano for the super easy steps,
but it seems that I rooted my G532F with your G532M root file/method. however the problem is that i get this message everytime my device boots (set warranty bit = kernel (0))
I feel something wrong happened in here.
Any advise?
 

hernankano

Senior Member
Thanks hernankano for the super easy steps,
but it seems that I rooted my G532F with your G532M root file/method. however the problem is that i get this message everytime my device boots (set warranty bit = kernel (0))
I feel something wrong happened in here.
Any advise?

Do not worry is normal, it is because the boot file that flashed, this does not affect the use of the phone
 

Wally73

New member
Apr 29, 2012
1
1
Rotterdam
OnePlus 6T
mm i've done it on my sm-g532F , it went fine until i got the screen for a pin code to unlock (and my phone didn't had any locks on it)

did factory reset, and now its in a boot loop

edit
Downloaded G532FXWU1APJ1_G532FOJV1APK2_AFR from sammobile , went in dev mode etc, run the root -english.exe and now its rooted
 
Last edited:
  • Like
Reactions: Calabazadechocolate

4ld0u5

Member
May 31, 2016
22
18
root method only works with old firmware. when i try to root updated firmware it asks for password/pin which i did not set. the latest update fixes tge bug dark front cam in video calls. how do i fix this. i can succesfully root with old firmware but not with updated firmware
 

maxkhor95

New member
Dec 28, 2016
1
0
Where can download G532f malaysia firmware(sammobile don't have most of malaysia firmware in 2016 devices)
i also encountered boot loop.
one more thing stock-boot.tar is also not working.
 
Last edited:

rogueyhere

New member
Dec 29, 2016
1
0
Can't root

I try to root it and the start up ask for password and i did factory reset and now it's doing boot loop, so i reflash the stock firmware and try it again still boot loop so i need help please i have galaxy j2 prime LTE Sm-G532m ????
 

liev

New member
Dec 29, 2016
1
0
bootloop

mm i've done it on my sm-g532F , it went fine until i got the screen for a pin code to unlock (and my phone didn't had any locks on it)

did factory reset, and now its in a boot loop

edit
Downloaded G532FXWU1APJ1_G532FOJV1APK2_AFR from sammobile , went in dev mode etc, run the root -english.exe and now its rooted

Done exactly and then got bootloop, but please explain what did you do next?
went in dev mode etc ?
Attached screens of bootloop and recovery
cant press Apply update from ADB | SD card - echo: Update from external storage is disabled.
tried to boot in download mode after Warning - Choose to press Volume up (continue) - again bootloop....
Please Help
 

Attachments

  • IMG_20161230_015926.jpg
    IMG_20161230_015926.jpg
    229.5 KB · Views: 2,171
  • IMG_20161230_020042.jpg
    IMG_20161230_020042.jpg
    209.2 KB · Views: 2,077

Top Liked Posts

  • There are no posts matching your filters.
  • 55
    [UPDATED] J2 Prime / Grand Prime Plus
    SAMSUNG GALAXY SM-G532F/M/G EASY ROOT KIT




    YOU MUST FOLLOW ALL THE STEPS IN THE VIDEO TO AVOID ERRORS

    youtu.be/SwuqvYYlqAs


    DOWNLOAD

    Credits:
    @Chainfire for SuperSU
    @hernankano the rest
    5
    Success!

    Now I understanded and followed the instructions from @hernankano and @TheRisingDragon.

    So basically to root the phone:

    -First: Make Sure to have the old Firmware Installed-
    1°-Download ODIN3
    2°-Download the respective firmware of your phone, that is here.
    3°- Flash the files on the firmware zip that you download on ODIN
    -AP -> AP
    -CSC -> CSC
    -BL -> BL
    -CP -> CP
    4°- Turn off your Phone and put it on Download Mode (Vol Down + Home + Power)
    5°- Once ODIN detects it, Flash the Firmware,
    6°- Now YOU CAN do the rooting process.
    -Second: ROOT the phone following the video on the original post-

    Troubleshoot and Known Issues:
    1°-Phone ask for password after the Rooting Process.
    Cause 1: Rooted with the wrong firmware (New Firmware)
    Cause 2: Unknown.
    Solution: Try to Wipe Data/Cache using the Recovery Mode (Vol UP + Home + Power), if that causes a bootloop then it's becuase you're using the wrong firmware.

    2°-Bootloop After Wiping Data and Cache.

    Cause: Rooted with the wrong firmware (New Firmware)
    Solution: Flash the firmware provided in the original post. If you don't know how tho flas a Firmware, follow the instructions provided at the begining of this post.

    Thanks for the Help @hernankano and @TheRisingDragon
    3
    Thanks ,
    Ist Woking FinE.......1000000%%%%
    3
    mm i've done it on my sm-g532F , it went fine until i got the screen for a pin code to unlock (and my phone didn't had any locks on it)

    did factory reset, and now its in a boot loop

    Is it network locked? Flash stock firmware.
    3
    Thanks hernankano for the super easy steps,
    but it seems that I rooted my G532F with your G532M root file/method. however the problem is that i get this message everytime my device boots (set warranty bit = kernel (0))
    I feel something wrong happened in here.
    Any advise?

    Do not worry is normal, it is because the boot file that flashed, this does not affect the use of the phone