[ROOT][SGP311][4.3] Update to 10.4.1.B.0.109 keeping Root + DualRecovery - Generic UK

[Darkimmortal]

Just a simple guide to update to the latest JB firmware (10.4.1.B.0.109) on locked bootloader. The customisation is Generic UK.

Please note that this is only compatible with the SGP311 model of the Tablet Z, and requires that you are already rooted with dual recovery.

Your tablet will NOT be wiped if this is performed correctly, but you are still strongly recommended to take a full backup INCLUDING INTERNAL SD.

Downloads:
http://dl.weeaboo.com/SGP311/sgp311-43-109-uk.flashable.zip
http://dl.weeaboo.com/SGP311/SGP311_10.4.1.B.0.109_Generic_uk-ie_stripped.ftf
http://download.chainfire.eu/supersu
Latest TabZ-lockeddualrecovery flashable zip from http://nut.xperia-files.com/
http://www.flashtool.net/download.php

Installation:

1. Put all zip files on external SD (must be FAT or FAT32 format)
2. Boot into TWRP (press vol down when LED turns green on boot)
3. Flash in this order: (DO NOT REBOOT BETWEEN)
   1. sgp311-43-109-uk
   2. TabZ-lockeddualrecovery
   3. SuperSU
4. Go to Home -> Reboot -> Power Off
5. Using FlashTool, flash the stripped FTF (tick exclude UNKNOWN and untick all wipe)
6. You're done

 

[machmandp]

thanks for this

i followed everything and its all upgraded now
i had a couple of squeaky bum moments as neither the recovery or supersu would flash
but i managed to sort that afterwards

thanks again

Sent from my SGP311 using Tapatalk

 

[ndwgs]

@Darkimmortal

Thanks for this!

Is there a way to change the Generic UK to a Generic US ftf but doing all of what is in your guide?

Thanks!

 

[Darkimmortal]

@Darkimmortal

Thanks for this!

Is there a way to change the Generic UK to a Generic US ftf but doing all of what is in your guide?

Thanks!

You have to create a flashable zip for it too

 

[ndwgs]

You have to create a flashable zip for it too

Create a flashable zip of the ftf file I is to create?

Isn't the ftf the only thing needed? A bit confused, sorry.

 

[physeptone]

I have my xperia tab 311 all rooted and unlocked bootloader which I did a while back.
Now I forget what I used..... how do I know if I have dual recovery to use this update? apologies for the stupid question....

 

[wilx]

Just a simple guide to update to the latest JB firmware (10.4.1.B.0.109) on locked bootloader. The customisation is Generic UK.

Please note that this is only compatible with the SGP311 model of the Tablet Z, and requires that you are already rooted with dual recovery.

Your tablet will NOT be wiped if this is performed correctly, but you are still strongly recommended to take a full backup INCLUDING INTERNAL SD.

Downloads:
http://dl.weeaboo.com/SGP311/sgp311-43-109-uk.flashable.zip
http://dl.weeaboo.com/SGP311/SGP311_10.4.1.B.0.109_Generic_uk-ie_stripped.ftf
http://download.chainfire.eu/supersu
Latest TabZ-lockeddualrecovery flashable zip from http://nut.xperia-files.com/
http://www.flashtool.net/download.php

Installation:

1. Put all zip files on external SD (must be FAT or FAT32 format)
2. Boot into TWRP (press vol down when LED turns green on boot)
3. Flash in this order: (DO NOT REBOOT BETWEEN)
   1. sgp311-43-109-uk
   2. TabZ-lockeddualrecovery
   3. SuperSU
4. Go to Home -> Reboot -> Power Off
5. Using FlashTool, flash the stripped FTF (tick exclude UNKNOWN and untick all wipe)
6. You're done

Ok I have done this, but I have lost TWRP , it doesn't show up anymore on pressing vol down at green LED, root is there but just cant get into TWRP.... any suggestions

 

[exp13579]

You have to create a flashable zip for it too

And where can we find the basic zip file and how to the system in to tgz format?

 

[Darkimmortal]

And where can we find the basic zip file and how to the system in to tgz format?

http://forum.xda-developers.com/showpost.php?p=42135099&postcount=1

 

[exp13579]

http://forum.xda-developers.com/showpost.php?p=42135099&postcount=1

Thanks, Pal.

 

[godsavenger]

Ok I have done this, but I have lost TWRP , it doesn't show up anymore on pressing vol down at green LED, root is there but just cant get into TWRP.... any suggestions

I have a same problem
It's a bug in the last version of DualRecovery....2.71....

I was on 370 rooted and all is working fine, I'm on 109 root perfect