[ROOT] TMO/VZW/ATT/SPRINT/INTL Root your LG G4 with Low Effort Root!

Search This thread

billybob275

Senior Member
Sep 21, 2010
222
59
Ok maybe I'm confusing myself but I have a question. The first set of instructions say to use system.rooted.vs98610b (I have the Verizon G4). Why does the run command have if I downloaded the system.rooted.vs98610b file? Currently, I'm downloading this:


.

Once that is extracted, should it replace system.rooted.vs98610b on the phone's internal storage?

Sorry I just want to make sure I have this right. I just picked up the phone and I am on 10B.

If you're phone is on version 10b then use the system img and that command for (system.rooted.vs98610b) on page 94.

If you're on 11a then you'll need to use the one on page 1 with the command for system.rooted.vs98611a
 
Last edited:
  • Like
Reactions: sefirosu0522

nash211

Senior Member
May 13, 2013
286
35
Hi:

I followed the directions and when I select the dd script to run nothing happens, I selected the right port, shows up in my device manager but does not load the new image, what am I missing, watched both videos.
 

varaonaid

Member
Jun 25, 2009
32
1
Huge thanks to the devs and everyone who has helped make root possible. I'm really grateful for all of the time and effort everyone put in to give this to the G4 community.

Couple of quick questions I wanted to clarify before proceeding...am I correct that this essentially does not alter the LG ROM that each phone variant comes with other than giving the user root permissions? Meaning this isn't flashing a different system (such as stock vanilla Lollipop or a fully featured G4 ROM rather than the carrier crippled versions) and whatever version of the G4 one has on their phone to begin with is what they will have after this process only with root access, is that correct?

Secondly, I noticed that it was mentioned two or three times in the flashing instructions that the devs will still be seeking a different rooting method, even though it's been achieved through this process. It seemed as though this wasn't the way they would have preferred to attain root. Am I correct on this? Is there a reason to wait if it isn't critical to have root right now? I've rooted my phones before but don't fully understand all the reasons why one particular method is preferable and what each one offers in terms of pros and cons. Any insight to help understand this better would be awesome. If I've missed the info somewhere, please just point me to it.
 

android404

Senior Member
Jan 19, 2013
1,425
774
Huge thanks to the devs and everyone who has helped make root possible. I'm really grateful for all of the time and effort everyone put in to give this to the G4 community.

Couple of quick questions I wanted to clarify before proceeding...am I correct that this essentially does not alter the LG ROM that each phone variant comes with other than giving the user root permissions? Meaning this isn't flashing a different system (such as stock vanilla Lollipop or a fully featured G4 ROM rather than the carrier crippled versions) and whatever version of the G4 one has on their phone to begin with is what they will have after this process only with root access, is that correct?

Secondly, I noticed that it was mentioned two or three times in the flashing instructions that the devs will still be seeking a different rooting method, even though it's been achieved through this process. It seemed as though this wasn't the way they would have preferred to attain root. Am I correct on this? Is there a reason to wait if it isn't critical to have root right now? I've rooted my phones before but don't fully understand all the reasons why one particular method is preferable and what each one offers in terms of pros and cons. Any insight to help understand this better would be awesome. If I've missed the info somewhere, please just point me to it.

I believe you're correct: if you do all of this right, you delete your system and flash the same type of system, prerooted by op. If you do it a bit wrong though, you end up in a situation that might be hard to recover from (reflash kdz with flashtool, no kdz for some versions of the phone yet), and if you do it completely wrong you destroy your phone. I guess that's why a one-click method would be preferred.
 
  • Like
Reactions: varaonaid

Medizinmann

Senior Member
Nov 14, 2011
436
124
Hi:

I followed the directions and when I select the dd script to run nothing happens, I selected the right port, shows up in my device manager but does not load the new image, what am I missing, watched both videos.
Well you have a # then punch in the dd command and after a few minutes you get a # again - that's it.

After reboot you should be asked to update SuperSu - do it reboot and you're done.

Greetings
Medzinmann
 

tedescop

Senior Member
Jan 5, 2012
272
48
New Rochelle
Hope someone can point me in the right direction but I guess I did something wrong. I think I followed the instructions properly (went over them a dozen times)
uploadfromtaptalk1439504117081.jpg
5333f31b4423fc01f69fa007372c7277.jpg


Sent from somewhere via Nexus 6
 

RenaKunisaki

Senior Member
Jun 16, 2015
150
35
Cambridge, Ontario
So yesterday morning I did the same thing a previous poster did - I ran the command in step 10 before I realized I should have stopped and come back here. The difference is my phone is a VS986. I pulled the battery to reboot thinking the worst but everything is working fine and I have root. Battery life today has been fantastic. Should I be worried that I screwed up something that hasn't reared its ugly head yet or should I be fine? Just wondered if I need to take action now or just let it be. Like I said, so far everything is working fine - mobile data, sd card, wifi, etc.

I think it won't hurt anything. You're just asking it to run a script, but you never put that script on it, so it will just not do anything.
 

Mystikalrush

Senior Member
May 1, 2011
392
39
If i accidentally forgot to go back and to step 10 on the other website link is that okay? Because i followed everything here and after typing Leave it reboots so i assumed i was done, but totally forgot about the previous website to run the root script. Do i need to do this and if so, just go back into download mode, paste the command and done?
 

RenaKunisaki

Senior Member
Jun 16, 2015
150
35
Cambridge, Ontario
If i accidentally forgot to go back and to step 10 on the other website link is that okay? Because i followed everything here and after typing Leave it reboots so i assumed i was done, but totally forgot about the previous website to run the root script. Do i need to do this and if so, just go back into download mode, paste the command and done?

There's no root script to run on the G4. You just push the system.rooted.img file, reboot into download mode, run the dd command, and run LEAVE (in all caps) to reboot.

There is a script which will modify an existing system.img to give you root. That's useful if you don't want to download a pre-rooted image (since they're huge) or one isn't available for your phone. It needs to be run on a Linux PC though (or another, already-rooted phone). If you downloaded the rooted image, you don't need that script.
 

Mystikalrush

Senior Member
May 1, 2011
392
39
There's no root script to run on the G4. You just push the system.rooted.img file, reboot into download mode, run the dd command, and run LEAVE (in all caps) to reboot.

There is a script which will modify an existing system.img to give you root. That's useful if you don't want to download a pre-rooted image (since they're huge) or one isn't available for your phone. It needs to be run on a Linux PC though (or another, already-rooted phone). If you downloaded the rooted image, you don't need that script.

Ahh okay, then im good then. Thanks for the help. Everything seems fine, ive already got my rooted apps installed and now freezing and backing up all my stuff. So happy to have root on my G4!
 
Oct 24, 2014
21
1
Thankyouthankyouthankyou

Edged up to the VZW VS986 today. I saw I would need to do some flashing, so I figured I should do this before I got it customized. To my surprise, ALL my stuff stayed in place, from WiFi passwords to apps. That was easy, THANK YOU!
I HAZ ROOTZ!!!
 

Medizinmann

Senior Member
Nov 14, 2011
436
124
If i accidentally forgot to go back and to step 10 on the other website link is that okay? Because i followed everything here and after typing Leave it reboots so i assumed i was done, but totally forgot about the previous website to run the root script. Do i need to do this and if so, just go back into download mode, paste the command and done?

If you use one of the prerooted system.img from the startpost you don't need any script. The inject root script is only needed if want to create your own rootedsystem.img.

Greetings
Medzinmann
 

Top Liked Posts

  • There are no posts matching your filters.
  • 595
    Hello all,

    It's that time of the night where I post things on XDA and wake up to a bajillion PMs.

    Without further ado, I introduce "Low Effort Root".

    What is this?

    Low Effort Root is a root for your LG G4, named such because this is a root we really weren't too interested in releasing, but the phone is gaining critical mass so we figured waiting any longer would be a disservice to the community.
    (We also don't like that the root ends up being ~4GB, since we're flashing whole new system partitions.)
    We had originally planned on releasing an in-android root app, however time constraints on all the team members has prevented us from devoting the necessary time to it.

    This root will root any LG G4, provided we have a pre-rooted system image for it. This is akin to 'flashing a rooted odin' image on a Samsung phone, as we're simply writing a system partition that contains Superuser.
    No exploits here, no trickery, just a plain and simple flash and be on your merry way.

    How do I use this?

    Please read the whole directions here carefully. If you miss a step, or you copy the wrong command and run it, your phone will be BRICKED. You will have flashed a partition to some random place on your phone's internal SD, and no amount of sad private messages will be able to help you.
    I'm 100% serious, if you do this wrong, you will turn your phone into a paperweight - so please don't go rooting your mom/dad's phone with this method. Wait for something better from us.

    1. Ensure you have the proper drivers for your phone. If you don't, download and install the proper driver below.
      Code:
      All G4 (except Verizon) - [URL="http://downloads.codefi.re/autoprime/LG/LG_G4/LGUnitedMobile_Win_Driver_Ver_3.14.1.exe"]http://downloads.codefi.re/autoprime/LG/LG_G4/LGUnitedMobile_Win_Driver_Ver_3.14.1.exe[/URL]
      Verizon - [URL="http://downloads.codefi.re/autoprime/LG/LG_G4/LG_VZW_United_WHQL_v2.22.0.exe"]http://downloads.codefi.re/autoprime/LG/LG_G4/LG_VZW_United_WHQL_v2.22.0.exe[/URL]
    2. Open this forum link and keep it up in another tab. We'll refer to it again in step 6: http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772 (and while you're at it, give the op there a thanks!)
    3. Download the appropriate files for your phone from the section below. Make sure to grab the Send_Command tools (named LG_Root.zip below)
    4. Extract the tar.gz file you downloaded for your phone, and move the resulting "system.rooted.phonemodel.img" file to the root of your phone's internal SD card with MTP mode. Do not rename this file, or move it into any folders. If you don't get a file named "system.rooted.phonemodel.img" DO NOT continue. You need to properly extract the file.
    5. On the page you opened in step 2, follow steps 1,2,3,6,7,8,and 9 on that page only, then come back here.
      Ensure that on step 9, you use the right COM port.
    6. Type "id" and press enter (no quotes).
      You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and do step 9 again (the application sometimes doesn't respond on the first command).
    7. Run the command specified in the section below titled 'Commands to Run' to flash the rooted system image.
    8. After a few minutes of sitting, you should get back a "#" prompt. This indicates the process has finished.
    9. Type "LEAVE" (no quotes) and press enter. Your phone should reboot, and your phone will be rooted.

    Now that you're rooted, MAKE SURE YOU DISABLE OTA UPDATES, if you accidentally take an OTA, you might not be able to roll back or fix it.
    You can also delete the system.rooted.modelnumer.img from your phone's internal SD card to save some space.

    Commands to Run

    T-Mobile H811 10H Version:
    Code:
    dd if=/data/media/0/system.rooted.H81110h.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    VZW VS986 11A Version:
    Code:
    dd if=/data/media/0/system.rooted.vs98611a.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    International H815 10c Version (NOT H815T, H815TR, H815P, etc - you will lose internationalization and possibly features):
    Code:
    dd if=/data/media/0/system.rooted.H81510c-EU.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    AT&T H810 10G Version:
    Code:
    dd if=/data/media/0/system.rooted.h81010g.img bs=8192 seek=65536 count=579584 of=/dev/block/mmcblk0

    Sprint LS991 ZV5 Version:
    Code:
    dd if=/data/media/0/system.rooted.LS991ZV5.img bs=8192 seek=65536 count=557312 of=/dev/block/mmcblk0

    If your phone isn't listed here DO NOT run these commands on your phone. You will break your phone.
    If your phone isn't running the EXACT firmware version specified, you will need to OTA to the proper version to root. If you'd like to not OTA, sit tight while we get a better root together.

    Download Links (more to come soon)

    Send_Command tools - ALL variants require this (you'll use this in step #5):
    Code:
    [URL="http://downloads.codefi.re/thecubed/lg_g4/lef/LG_Root.zip"]http://downloads.codefi.re/thecubed/lg_g4/lef/LG_Root.zip[/URL]
    (I'm mirroring these because unfortunately Dev-Host is tricking users into downloading malware with a 'Download' versus 'Download Now' button. As much as I feel bad for mirroring, I'd feel worse if I let people get led astray by a site that is tricking users.)

    Download one of the following, depending on your phone's model

    T-Mobile:
    Code:
    [URL="http://downloads.codefi.re/thecubed/lg_g4/lef/h81110h.tar.gz"]http://downloads.codefi.re/thecubed/lg_g4/lef/h81110h.tar.gz[/URL]

    Verizon:
    Code:
    [URL="http://downloads.codefi.re/thecubed/lg_g4/lef/vs98611a.tar.gz"]http://downloads.codefi.re/thecubed/lg_g4/lef/vs98611a.tar.gz[/URL]

    International H815 10c Version:
    Code:
    [URL="http://downloads.codefi.re/thecubed/lg_g4/lef/h81510c-eu.tar.gz"]http://downloads.codefi.re/thecubed/lg_g4/lef/h81510c-eu.tar.gz[/URL]

    AT&T:
    Code:
    [URL="http://downloads.codefi.re/thecubed/lg_g4/lef/h81010g.tar.gz"]http://downloads.codefi.re/thecubed/lg_g4/lef/h81010g.tar.gz[/URL]

    Sprint:
    Code:
    [URL="http://downloads.codefi.re/thecubed/lg_g4/lef/LS991ZV5.tar.gz"]http://downloads.codefi.re/thecubed/lg_g4/lef/LS991ZV5.tar.gz[/URL]

    Please do not mirror these files. Also, you do NOT have my permission to roll any of this into a 'one-click' root.

    Ah Gawd, something went wrong!

    Did it really? That's interesting... Luckily short of running the wrong command, you can easily recover from a bad flash by simply looking for the "Return to Stock" thread here on XDA for your phone, and flashing the KDZ from there.
    KDZs cover a multitude of sins (short of you putting something in the completely wrong place on the EMMC).

    Why isn't my variant supported?

    See Post #2 by @autoprime (or click here: http://forum.xda-developers.com/showpost.php?p=62028523&postcount=2 )

    Special Thanks

    First, I really need to thank everyone that donated to get Team Codefire phones.
    You all are *super* awesome, and we are very grateful to be the recipients of your kindness :)

    That said, if you'd like to consider donating to us for our work, our donation links are here. Thanks!
    • @thecubed - Paypal Donate - That's me!
    • @IllegalArgument - Paypal Donate - As usual, IllegalArgument is a genius. He also might be a mad scientist, it won't surprise me when he achieves cold fusion somehow.
    • @autoprime - Paypal Donate - 99.92% of testing for this root and pretty much all our other goodies get tested by autoprime - he's awesome -- he even wrote up the instructions for this root for me :)
    • @jcase - Paypal Donate - Gotta add jcase here, he's a wealth of information and a damn smart dude all around.
    240
    I just wanna say thanks again to everyone who donated to the original gofundme so we could get these G4's in hand. :highfive:

    If you use MTP it shouldnt take too long to move the system.img over to internal scard (no u cant use external sd for this).
    If you use ADB push... it takes a good.. 20-25min to push the file over to internal storage.
    Using the dd commands to flash the system img should only take a few minutes.

    As for the bounty/donations for root... yes there are 4 paypals linked. Ideally you'd split each donation up... as we only get what's donated to each of us. Due to taxes.. multiple ppl involved etc... it's just more difficult (on us) to use a single email.
    I'm gonna call out everyone who pledged but doesn't come thru. JK.. maybe.. :silly:

    be sure to follow me on twitter to keep up with the latest news and updates.. @utoprime

    Command to Flash System.img (All Variants):

    These commands are an extension of the OP.. adding support for the rest of the G4 variants not included in initial release.

    REPLACE "rootedsystem.img" in your command with the name of the actual rooted.system.img you're using.
    Example... if you downloaded a rooted system img for F500K 10F you'd change:
    dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
    into
    dd if=/data/media/0/rooted.system.F500K10F.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
    (or whatever the filename is...)

    AS991:
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=509952 of=/dev/block/mmcblk0

    F500K/L/S :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    H810 AT&T :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=579584 of=/dev/block/mmcblk0

    H810PR :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H811 T-Mobile :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    H812 Canada (All H812s) :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    H815 EU/SEA/TWN :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H815L :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H815P :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H815T :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H815TR :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H818 China:
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    H818N :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H818P :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0

    H819 China:
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    LS991 Sprint :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=557312 of=/dev/block/mmcblk0

    VS986 Verizon :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    US991 US Cellular :
    Code:
    dd if=/data/media/0/[B]rootedsystem.img[/B] bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0

    Pre-Rooted System.img Download Links


    These are links for pre-rooted system.imgs from the users.
    I will not link to new threads... only system.imgs posted in this thread.

    AS991 10C:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62213418&postcount=1578"]http://forum.xda-developers.com/showpost.php?p=62213418&postcount=1578[/URL]

    H810 10B / 10E:
    Code:
    [URL="http://forum.xda-developers.com/att-g4/development/root-images-h81010b-h81010e-t3168427"]http://forum.xda-developers.com/att-g4/development/root-images-h81010b-h81010e-t3168427[/URL]

    H810 10I:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62809806&postcount=2091"]http://forum.xda-developers.com/showpost.php?p=62809806&postcount=2091[/URL]

    H810PR 10A:
    Code:
    [URL="http://forum.xda-developers.com/att-g4/development/ahhh-root-sweet-delicious-root-h810pr-t3168322"]http://forum.xda-developers.com/att-g4/development/ahhh-root-sweet-delicious-root-h810pr-t3168322[/URL]

    H812 (All Variants):
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62115644&postcount=1249"]http://forum.xda-developers.com/showpost.php?p=62115644&postcount=1249[/URL]

    H812 10G:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=63010862&postcount=2172"]http://forum.xda-developers.com/showpost.php?p=63010862&postcount=2172[/URL]

    H815 10B Vodafone Germany:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62132150&postcount=1365"]http://forum.xda-developers.com/showpost.php?p=62132150&postcount=1365[/URL]

    H815 10B Germany EUR (Open):
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62161571&postcount=1477"]http://forum.xda-developers.com/showpost.php?p=62161571&postcount=1477[/URL]

    H815 10D EUR (Open):
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62225446&postcount=1596"]http://forum.xda-developers.com/showpost.php?p=62225446&postcount=1596[/URL]

    H815 SEA 10B:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62140625&postcount=1400"]http://forum.xda-developers.com/showpost.php?p=62140625&postcount=1400[/URL]

    H815T 10B HKG:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62114467&postcount=1242"]http://forum.xda-developers.com/showpost.php?p=62114467&postcount=1242[/URL]

    H818P 10D:
    Code:
    [URL="https://www.androidfilehost.com/?fid=24052804347781803"]https://www.androidfilehost.com/?fid=24052804347781803[/URL]

    US991 10A Unlocked:
    N/A

    US991 10A US Cellular:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=64854943&postcount=2642"]http://forum.xda-developers.com/showpost.php?p=64854943&postcount=2642[/URL]

    US991 10C US Cellular:
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=62115811&postcount=1251"]http://forum.xda-developers.com/showpost.php?p=62115811&postcount=1251[/URL]

    Backup System to Internal Storage (Commands for all variants):

    Rather than flashing a pre-rooted system.img.. the following commands are to backup your current system partition into a system.img on your internal sdcard. You would do this if you want a stock system.img.. possibly to upload/share with others on this forum so someone can pre-root it... or to unroot and go back to stock (though it's probably easier to use a KDZ to go back to stock if you have one available).

    AS991:
    Code:
    dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=509952 of=/data/media/0/system.img

    H810PR, H815 (All variants), H818N/P :
    Code:
    dd if=/dev/block/mmcblk0 bs=8192 skip=55296 count=529920 of=/data/media/0/system.img

    F500, H811, H812, H818, H819, VS986, US991 :
    Code:
    dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=548352 of=/data/media/0/system.img

    H810 AT&T :
    Code:
    dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=579584 of=/data/media/0/system.img

    LS991 :
    Code:
    dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=557312 of=/data/media/0/system.img

    How-to Videos:

    If you have a related video I think is worth sharing I will add it below.

    [How to] Root the LG G4 without bootloader unlock by @rirozizo

    How to Root your LG G4 all variants by @Tomsgt aka Rootjunky
    57
    I'm off to bed here shortly... If anything breaks, I blame autoprime :)
    43
    OMG!!! the links are down though.

    I want to try it on mine H815L, i could flash H815 KDZ with no problem, can i root it?

    Links should be back up.. had some quick scheduled maintenance.

    As for if H815L or H815T or H815TR or H815P will work with the existing H815 image... not sure to be honest. It SHOULD but I'm not sure what sort of localization files are included in each of those H815X variants. I would say.. if u wanna go for it.. go for it... just confirm you can grab a KDZ for your phone first.

    See here for KDZ info http://forum.xda-developers.com/showthread.php?goto=newpost&t=3147406

    Worst case.. the language is wrong or something and you flash back to stock KDZ. We plan on adding more intl system images later today/tomorrow if you don't wanna risk it.

    Thanks for the BEST releasing, but does it support Hong Kong H818N? Or H818P? Thank you.

    Like my above answer.. it's hard to say. Im not sure if there are any different files due to dual sim H818N/H818P. I can confirm worst case would be.. just flash KDZ if it doesnt work out with H815 img (for your exact models you mentioned). We plan on adding H818N/P and H818/H819 etc etc later today/tmw.

    I can say, if you are H818/H819 china.. do NOT flash anything yet. You need your own images.

    F500, H810, H812, H818/9, H818N/P, H815X, LS991, US991 all coming soon. :good:
    (we need sleep)
    23
    Canadian LG G4 variants = FULLY ROOTED

    Hello everyone,

    Here is a link to all LG G4 variants for Canadian owners (H812):

    • Bell / Sasktel (SAME ROM)
    • Rogers / MTS (SAME ROM)
    • Telus
    • Videotron
    • Wind Mobile

    Code:
    [URL="https://www.androidfilehost.com/?w=files&flid=36116"]https://www.androidfilehost.com/?w=files&flid=36116[/URL]

    Enjoy!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone