[ROOT][TWRP][MODS][ROMS] WIKO U Feel Prime

Did this guide work on your Wiko U Feel Prime?


  • Total voters
    19
Search This thread

glococo

Member
Mar 2, 2008
47
8
Last edited:

Xpl0it_U

Member
Jul 23, 2017
23
1
I had the same errors. but later after tried many things, I end up using the 1.0.0.3 version which worked fine.

It doesnt work for me, sahara protocol error, the header is 0kb

---------- Post added at 07:52 PM ---------- Previous post was at 07:25 PM ----------

It doesnt work for me, sahara protocol error, the header is 0kb

nvm, just installed qpst tools and moved the fw to pgfilesx86, Qualcomm, qpst, bin. and it worked
 

glococo

Member
Mar 2, 2008
47
8
Hi Foxyone,
I end up with mine in diagnostic 900e.
I tried deep cable but it didnt change to EDL.

Have you learned anything new about hard debrick?
Btw; in deepCable mode, red led blink at 1hz.

Cheers
 

karambolage2k3

New member
Jan 2, 2020
2
0
no need to restore Bluetooth and wifi Mac Adress.
wifi and Bluetooth will work without restore.

yes but they have changed after switching to yu yureka firmware, so if you want the original one back you have to flash that too.

The whole procedure worked fine for me ... so thanks for the solution! First flashing the yureka FW with the Wiko Firmware tool, then flashing imei. Now I am on AICP Rom (Android 9) and very happy with it :)
 

glococo

Member
Mar 2, 2008
47
8
do you brick your phone?
I don't understand, because you success install android 9!

Yes, after trying to workaround the fingerprint issue with Yureka firmwares, flashed some img, and end up in brick state.
It start in diagnostic 900e. I tried deep cable but it didn't show up in EDL.

It responded to deep flash cable in some way. It start to flash red led once per second, but it still get discovered as 900e in my win7

:confused:
 

foxyone0809

Senior Member
Oct 4, 2015
166
29
Sony Xperia Z1 Compact
Honor 8
Yes, after trying to workaround the fingerprint issue with Yureka firmwares, flashed some img, and end up in brick state.
It start in diagnostic 900e. I tried deep cable but it didn't show up in EDL.

It responded to deep flash cable in some way. It start to flash red led once per second, but it still get discovered as 900e in my win7

:confused:

but the fingerprint is ok with yureka black firmware.
I use resurection remix 7 (android pie) for device garlic (yureka Black name code) and all is ok

did you tried to use qfil for flash yureka firmware and repair?
 

A Trash Can

Member
Oct 13, 2022
19
1
apologies on necroposting, but i have took back my own wiko ufeel prime and found a turnaround to the device being "unmoddable" by using another android device.
Check my guide for more

Looks like the whole problem will be called solved
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Okay, So before I show you all the goodies for your Wiko U Feel Prime let me tell you a little bit about whats going on...

    I technically do not own a U Feel Prime, how ever I own the variant Blu Life One X2 Mini, though it seems to be very closely related according to GSMarena

    Managed to port TWRP recovery originally from the Redmi 3S (again closely related) to the Life One X2, which I then ported to the Life One X2 Mini (confusing; I know). Long story short, this version of the ported TWRP recovery has been confirmed to work on the U Feel Prime.

    Before I get into how to install TWRP and root your U Feel Prime there are a few things that need to be noted....
    1. If the wiko is using the same kernel that is one the Life One X2 Mini then you WILL NOT be able to remount /system partition as RW (read and write) (PLEASE TEST THIS AND REPORT BACK TO ME)
    2. DO NOT INSTALL SUPERSU AND MAGISK; choose ONE. They don't tend to play very nicely with each other. Which can lead to weird errors and soft bricks.
    3. Magisk will also allow for systemless host file (to install Adaway), busybox and TONS of other systemless goodies
    4. If TWRP gives you any issues (vibrates and reboots when performing flashes or nandroid backups) then boot into TWRP, select "mount" then disable MTP.


    Let's get down to it:

    download here: TWRP RECOVERY
    1. Enable Development Options
    2. Go into Development Options and enable OEM Unlocking
    3. Connect phone to computer and open command prompt, run command "adb reboot bootloader"
    4. Run the command "fastboot oem unlock"
    5. Reboot into system to make sure everything is all good
    6. again run command "adb reboot bootloader"
    7. run fastboot command "fastboot flash recovery TWRP.img"
    8. Then boot into twrp "fastboot boot TWRP.img"
    9. Tap on 'reboot' at the bottom corner and select 'system'

    To get root simply flash the latest Magisk12.zip


    I will be updating this thread periodically.

    If you want to try some other mods, tools, guides and ROMs designed for the Life One X2 and Life One X2 mini then check out BLOX2.com
    BE SURE BEFORE FLASHING ANYTHING THAT IT IS COMPATIBLE WITH THE LIFE ONE X2 MINI; OTHERWISE YOU WILL BRICK YOUR PHONE!

    Also, if anyone would be so kind to send me a nandroid backup of /boot and /system so that I can make a flashable Stock ROM.


    -ieatgravity
    3
    Okay, So before I show you all the goodies for your Wiko U Feel Prime let me tell you a little bit about whats going on..

    I technically do not own a U Feel Prime, how ever I own the variant Blu Life One X2 Mini, though it seems to be very closely related according to GSMarena

    Managed to port TWRP recovery originally from the Redmi 3S (again closely related) to the Life One X2, which I then ported to the Life One X2 Mini (confusing; I know). Long story short, this version of the ported TWRP recovery has been confirmed to work on the U Feel Prime.
    .

    Another One , I mean another Cousin "Yu Yureka Black " Indian Variant of Wiko U Feel Prime /Blu Life One X2 Mini
    http://www.gsmarena.com/yu_yureka_black-8714.php
    Also Check the Development Page ( Roms/ Kernels/ Recovery) here

    Hope This helps, lets Contribute to the Device.
    3
    Can you share the method?

    Sent from my Galaxy S9+ using XDA Labs
    !!!! Before doing this! don't forget to save your files. This method will reset factory your phone !!!

    At first you must have activated developper mode , and activate "usb debug" and "OEM unlock" in developper options.
    url]

    You can read this post if you don't know anything about adb .https://www.xda-developers.com/how-to-install-twrp/

    1. Download this recovery "twrp-3.3.1-1-garlic.img" , download last magisk manager apk and magisk 20.0
    https://dl.twrp.me/garlic/twrp-3.3.1-1-garlic.img.html put this file on pc in adb folder
    https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip put this file on sd card in phone
    https://github.com/topjohnwu/Magisk/releases/download/manager-v7.3.5/MagiskManager-v7.3.5.apk put this file on sdcard in phone

    2. Connect your phone to the PC with usb. Type the following into the command window to boot your device into bootloader/fastboot mode:
    adb reboot bootloader

    3. when phone is in fastboot mode, enter this commmand
    fastboot oem unlock-tinno

    (now your phone is unlocked, and your system has been reset)

    4. enter command to flash recovery
    fastboot flash recovery twrp-3.3.1-1-garlic.img

    5. after flashing twrp, you have to enter this command in order to reboot in custom recovery directly :
    fastboot boot twrp-3.3.1-1-garlic.img

    6. now your are in custom recovery , flash the file you put on sdcard named "Magisk-v20.0.zip"

    7. return at menu and go in advanced wipe and select select "Dalvik / ART Cache" and "Cache", then wipe
    8. return at menu and go to reboot and select reboot system
    9. navigate to your phone folder and install MagiskManager-v7.3.5.apk (you must have authorized unknown sources in phone)

    Now you have a root Ufeel Prime with Nougat.
    You can also flash roms from clone yureka black. But you will loose good apk like wiko camera and gallery, and you will loose fingerprint gesture for return and open recents app. Android Pie and Oreo have other good navigation modes with hide navigation bar.
    https://forum.xda-developers.com/yu-yureka-black

    Tell me if it works for you!
    2
    I'm going to have mine tomorrow, I'm android developer, tomorrow night definitely you'll have root

    Bonjour Tigrou!
    Did you buy your ufeel prime?
    Looking forward to hearing from you.....
    2
    That's not correct, if you have the MM EXE from Wiko, you can install M without problems like me.

    Sent from my dream2lte using XDA Labs