How To Guide Root X7 Max(RMX 3031) on Rui 2.0 and 3.0

Search This thread

Soul Spark

Senior Member
Jun 22, 2017
94
10
Dhanbad
Realme X7 Max 5G
Prerequisites:

Steps:
For Rui 2.0
  • Goto TWRP (Download link and Install Guide) or any other custom recovery (ofox)
  • Rename Magisk-v25.2.apk to Magisk-v25.2.zip
  • Flash Magisk-v25.2.zip and reboot
For Rui 3.0
  • Get boot.img and vbmeta.img from export firmware (Download, Convert to SP tool guide)
  • Use magisk to patch the boot image:
    patch-stock-boot.img-new-magisk.jpg
    new-magisk-patched-boot-image.jpg
  • Connect the device to the PC via USB Cable.
  • Now transfer the patched boot file(magisk_patched.img) and vbmeta.img from your device to the platform-tools folder on your PC.
  • Inside the same folder, right-click on an empty area while pressing the ‘Shift’ key.
  • Select the option ‘Open PowerShell window here.
    Patch-and-flsh-boot-image-via-magisk-Open-PowerShell-window-here.jpg
  • Or you could also head over to the platform-tools folder on your PC, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
    command-prompt-twrp.jpg

  • Type in the below code to make sure the device is successfully connected (an alpha-numeric code suggests successful connection):
    Code:
    adb devices
  • Now type in the below code to boot your device to fastboot/bootloader mode:
    Code:
    adb reboot bootloader
  • Next, type the below code to flash the patched boot image file:
    CSS:
    fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
    
    fastboot flash boot magisk_patched.img
    
    fastboot reboot


Credits:
Thanks to @ManshuTyagi for TWRP and @topjohnwu for Magisk

PS: I have tested this on only RMX 3031, and it may work on GT neo(CN) (RMX 3357) without any edits. If it works for you, please let me know, will update the post accordingly.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Prerequisites:

    Steps:
    For Rui 2.0
    • Goto TWRP (Download link and Install Guide) or any other custom recovery (ofox)
    • Rename Magisk-v25.2.apk to Magisk-v25.2.zip
    • Flash Magisk-v25.2.zip and reboot
    For Rui 3.0
    • Get boot.img and vbmeta.img from export firmware (Download, Convert to SP tool guide)
    • Use magisk to patch the boot image:
      patch-stock-boot.img-new-magisk.jpg
      new-magisk-patched-boot-image.jpg
    • Connect the device to the PC via USB Cable.
    • Now transfer the patched boot file(magisk_patched.img) and vbmeta.img from your device to the platform-tools folder on your PC.
    • Inside the same folder, right-click on an empty area while pressing the ‘Shift’ key.
    • Select the option ‘Open PowerShell window here.
      Patch-and-flsh-boot-image-via-magisk-Open-PowerShell-window-here.jpg
    • Or you could also head over to the platform-tools folder on your PC, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
      command-prompt-twrp.jpg

    • Type in the below code to make sure the device is successfully connected (an alpha-numeric code suggests successful connection):
      Code:
      adb devices
    • Now type in the below code to boot your device to fastboot/bootloader mode:
      Code:
      adb reboot bootloader
    • Next, type the below code to flash the patched boot image file:
      CSS:
      fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
      
      fastboot flash boot magisk_patched.img
      
      fastboot reboot


    Credits:
    Thanks to @ManshuTyagi for TWRP and @topjohnwu for Magisk

    PS: I have tested this on only RMX 3031, and it may work on GT neo(CN) (RMX 3357) without any edits. If it works for you, please let me know, will update the post accordingly.