So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Last edited: