How To Guide RUI 3.0 Easy Rooting Guide - On GT NEO 2

[Nurujjamanpollob]

This thread going to guide you on how you can root Realme GT NEO 2 Device with RUI 3.0 installed.

This boot image is fresh, and it's patched for root access.

Caution: Before flashing, you need to have your bootloader unlocked, for bootloader unlocking, go to this link and follow the procedure to get approval and unlock your device bootloader.

Link: https://forum.xda-developers.com/t/bootloader-unlock-realme-gt-neo-2-rmx3370-all-variants.4391679/

After you get approval, you are ready to root your device!

For this tutorial, I gonna use a windows device.

​

WARNING!​

I am not responsible for anything. proceed at your own risk. Rooting or Unlocking the Bootloader voids the device warranty, keep it in your mind.

STEP - ONE​

Only follow this step, if you get approval for the bootloader, and you didn't unlock this device or your flashing environment needs to be configured. You need to visit the following link to set up your environment for flashing a custom boot image.

Link: https://njpsmultimedia.blogspot.com/2022/04/realme-gt-neo-2-bootloader-unlock.html you just need to follow the video tutorial on this website.

STEP - TWO​

​

It's assumed that your environment is properly configured. Let's flash this boot image to root your device.

Download this zip file from here https://drive.google.com/file/d/1Xk1yBp5EDCZbl3i3jMtOhjfaVtTCQqYB/view?usp=sharing and copy the boot.img file to platform-tools folder.

Then open the terminal and cd to the platform-tools folder.

Then, shut down your device and hold the vol up + vol down + power button together to boot this device into fastboot mode.

First, you need to run

fastboot devices

to check if your device is properly connected to the bootloader interface. If it shows something then your device is properly connected, If not, try to install the device driver, change the cable, or boot into the bootloader mode again.

If your device is connected properly, then you will see a screen like this:

And then run this command:

fastboot flash boot boot.img

Then,

fastboot reboot

You are done! Congratulation.

Note: This method was tested with Realme UI 3.0 android 12 on GT NEO 2. Do not try this method on RUI 2.0 or on other devices.

SCREENSHOTS​

Note ​

If you face NO WIFI, Sound issue on the C04 version, you are advised to flash this alternate version from here: https://forum.xda-developers.com/t/...uide-on-gt-neo-2.4435919/page-2#post-86985433

 

[theogr91]

Do you lose all data ? On the root part the bootloader is already unlocked

 

[jeidsoter]

Do you lose all data ? On the root part the bootlocker is already unlocked

- it is necessary to have the bootloader unlocked before flash (instructions on how to unlock the bootloader can be found in the video in the post above or here on the forum)
- after flash just install Magisk manager

no data loss, tested and functional

 

[Nurujjamanpollob]

Do you lose all data ? On the root part the bootlocker is already unlocked

If your bootloader is already unlocked, no data loss. but If your device bootloader is not unlocked, then unlocking your device data will be erased.

 

[theogr91]

Do we flash magisk or other way of root ?

 

[Nurujjamanpollob]

Do we flash magisk or other way of root ?

You need not flash anything extra than flashing customized boot.img. Just simply follow this step and your device will be rooted.

 

[theogr91]

Worked like charm thanks. Will the phone be ok after an OTA update ?

 

[mahesh.pujala]

Help...After flashing boot image and rebooted , Wifi is not scanning the networks and I am unable to take calls but 4g(internet) is working fine. Please reply me for any fix. I followed the exact steps you mentioned. My Device Realme Gt neo 2 UI 3.0

 

[Nurujjamanpollob]

Help...After flashing boot image and rebooted , Wifi is not scanning the networks and I am unable to take calls but 4g(internet) is working fine. Please reply me for any fix. I followed the exact steps you mentioned. My Device Realme Gt neo 2 UI 3.0

In my case, all is fine.
You can try backup data and then reset your device through recovery.

 

[Nurujjamanpollob]

Worked like charm thanks. Will the phone be ok after an OTA update ?

After the OTA update, you may need to flash this boot image again.

 

[mahesh.pujala]

Help...After flashing boot image and rebooted , Wifi is not scanning the networks and I am unable to take calls but 4g(internet) is working fine. Please reply me for any fix. I followed the exact steps you mentioned. My Device Realme Gt neo 2 UI 3.0

In my case, all is fine.
You can try backup data and then reset your device through recovery.

Thanks for the reply . Any way I reverted back to previous state by flashing stock boot image and firmeware. Now everthing works fine. I will think about rooting later..

 

[theogr91]

Removed root and updated to RMX3370_11_C.04 is it safe to reflash root image on this version?

 

[Grobie13]

Removed root and updated to RMX3370_11_C.04 is it safe to reflash root image on this version?

I just tried this and it worked for me...

 

[Grobie13]

Meanwhile I realised that my wifi and my phone don't work anymore... I have no idea if this boot image is the cause.

 

[theogr91]

Meanwhile I realised that my wifi and my phone don't work anymore... I have no idea if this boot image is the cause.

I have no wifi after the flash and i have no twp on RMX3370_11_C.04 any way to fix it ?

 

[Grobie13]

I have no wifi after the flash and i have no twp on RMX3370_11_C.04 any way to fix it ?

No solution so far. I think first everything was fine, after flashing the magisk boot image it's gone worse... But I'm not sure.

 

[jeidsoter]

I do not recommend updating on RMX3370_11_C.0. After flashing boot image (without Magisk) wifi no longer working.

 

[theogr91]

I flashed clean firmware and lock bl i am done moding this device only adb debloat.. And after clean flash netflix still wont open login screen...

 

[Nurujjamanpollob]

No solution so far. I think first everything was fine, after flashing the magisk boot image it's gone worse... But I'm not sure.

What device variant you use? India or global?


Probably I gonna update this boot image today with latest update.

 

[Grobie13]

What device variant you use? India or global?


Probably I gonna update this boot image today with latest update.

It's global respectively EU. But I start from scratch yesterday. I flashed twrp, format data and flashed magisk. But other people need your patched boot image. Thanks for providing.