Team Bad Boyz presents...
Here we have RUU for the Sprint HTC One E8! This RUU is for the Sprint model ONLY!!!
I STRONGLY RECOMMEND GETTING S-OFF B4 UPDATING TO 1.22.651.1 or newer!!!
RUU
Sprint_HTC_One_E8_3.10.651.6_RUU
Sprint_HTC_One_E8_2.32.651.11_RUU
Sprint_HTC_One_E8_1.22.651.1_RUU
Manual system update instructions (taken from HTC website):
If you are outside of Sprint/Wi-Fi coverage, or the update is not found, you may perform a manual system update. This process requires that you download and install HTC Sync Manager first in order to get the proper drivers. If you do not have HTC Sync Manager installed already, you may download the software from http://www.htc.com/www/software/htc-sync-manager/ .
WARNING: Performing the system update manually will delete all information from the device. Ensure all information is backed up before proceeding. See the Help & How To section of this website for more information on backing up your device contents.
Performing the ROM Update:
1. Download and save the HTC One™ for Sprint ROM update to your PC.
2. Connect your device to your PC via the supplied USB cable.
3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
4. Once the device is properly recognized on the PC, locate the HTC One™ for Sprint ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
5. Follow all of the system update wizard instructions shown on your PC.
6. Once the update is complete, click Finish in the Wizard and the device will reboot.
7. Once the device reboots, the initial setup wizard will appear.
8. Once the initial setup process is complete, the device is ready for use.
Note : If the ROM update wizard fails to recognize the device, close the wizard and then follow the steps below:
· From a powered off state, hold VOLUME DOWN while powering on the device.
· Use the volume buttons to scroll to FASTBOOT and then press the POWER button to select it.
· Connect the device to the PC while in this state and attempt the ROM update again.
To exit FASTBOOT manually, use the volume keys to navigate to REBOOT and press the POWER button to select it.
FIRMWARES
3.10.651.1 Full Firmware from RUU (fastboot flashable): https://www.androidfilehost.com/?fid=24651430732236981
3.10.651.1 Modified Firmware w/ Radio....removed recovery (fastboot flashable): https://www.androidfilehost.com/?fid=24651430732236980
2.32.651.11 Modified Firmware w/ Radio....removed boot & recovery (fastboot flashable): https://mega.nz/#!BgolyKZR!eIKaxPavVQluerWXoWKsmPrVwBVLkhKwIfcgxZef4XQ
*credit to @xXminiWHOOPERxX
2.32.651.11 Modified Hboot w/ red text removed (fastboot flashable): https://mega.nz/#!llQAjQjT!Aqb1KnDzRaDRH1vuFSeLM5q25verdVECqwMv3XchUkU
*credit to @xXminiWHOOPERxX
2.32.651.11 stock recovery: https://mega.nz/#!wsImVJQI!IkkSwXMrCmKXhM5kBaQT4iaT6m6stK9J2-u5JSHf45w
*credit to @xXminiWHOOPERxX
1.22.651.1 Full Firmware from RUU (fastboot flashable): https://www.androidfilehost.com/?fid=95784891001616053
1.22.651.1 Modified Firmware w/ Radio....removed hboot, boot, recovery (fastboot flashable): https://www.androidfilehost.com/?fid=95784891001616119
Flash Firmware via FUU (Firmware Update Utility)....
-Download Generic Firmware Update Utility (FUU)
-Extract generic_FUU.zip to a folder on pc
-Copy your desired firmware .zip to this folder
-Rename the firmware.zip to rom.zip, FUU will not run w/o the rom.zip, there must only be one rom.zip
-Run ARUWizard.exe & follow the steps, just like a RUU
*note s-on users must only use unmodified firmware
-credit to @Sneakyghost for the help, checkout his thread for alot more info on this method
Flash Firmware via Hboot (requires micro sd card)....
-rename firmware to 0PAJIMG.zip
-copy 0PAJIMG.zip to ext_sd card
-boot into bootloader
-make sure hboot is highlighted, press power button
-it will scan your ext_sd card, then ask if you want to start the update
-press volume up & let it do it's thing...
Flash Firmware via fastboot, no ext sd card needed....
-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type Fastboot oem rebootRUU
-when u see the black screen w/ HTC, type Fastboot flash zip firmware.zip
-when it's done, type Fastboot reboot
Here's a nice video from @thoughtlesskyle showing you how to flash the firmware:
Stock Rooted ROM (deodexed)
Sprint_HTC_One_E8_1.22.651.1_stock_rooted.zip
Thanks to @briankariu for being a good guinea pig
5.0.2 TWRP full backup
This includes files that are removed from unlocking.... good for s-off users who want to return to complete stock and take otas on s-off
Here
*credit to @xXminiWHOOPERxX
OTAs
Lollipop OTA
*credit to @xXminiWHOOPERxX
XDA:DevDB Information
[RUU][Firmware]Sprint HTC One E8 | 1.22.651.1 | Stock Rooted ROM | Updated 11.25.14, ROM for the HTC One E8
Contributors
O.M.J, benny3, chas123
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-11-25
Last Updated 2016-08-29