[RUU][FIRMWARE]Sprint One Stock 3.05.651.6

[OMJ]

OP updated w/ 3.05.651.6 RUUs...

 

[Ph33zy]

OP updated w/ 3.05.651.6 RUUs...

Hey OMJ,

You need to fix the link since it has some html code in it. Correct link is:

http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe

Thanks for the heads up!

 

[tdhite]

Hey OMJ,

You need to fix the link since it has some html code in it. Correct link is:

http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe

Thanks for the heads up!

O.M.J's re-upped file flashes like a champ -- just it over lunch break and no probs with recover (PhilZ for me) or ROM.

 

[JoeNeckbone]

O.M.J's re-upped file flashes like a champ -- just it over lunch break and no probs with recover (PhilZ for me) or ROM.

Just flashed 3.05.651.6 s-off firmware as well...so far so good.

 

[slickrick54]

Thanks OMJ!

 

[grandpoobah]

silly question but i fastboot flashed the Full Firmware w/o hboot, boot, recovery (fastboot flashable) and it was successful, is it suppose to update my software version to 3.05.651.6? it still says 3.04.651.2

 

[tdhite]

Your bootloader screen will show the new firmware version, not your software. They are different things.

 

[ticklemepinks]

can i just flash the radio???? or do i need the firmware and stuff to use it?

 

[benny3]

can i just flash the radio???? or do i need the firmware and stuff to use it?

Yes you can but if you have the radio from the Dec OTA this is the same radio 1.00.20.1108

 

[bleichtman]

the ruu wont run for me. get the license agreement then it stops

 

[D3luSi0n4L]

I post this in the other RUU thread but this one is newer so maybe I someone who knows will see. I'm wondering if it's safe to following the instructions in the original thread if my phones bootloader says this -

~~~~~~~~~~~~~~~~~~~~~~~
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OS-3.04.651.2
eMMC-boot 2048 MB
Sep 18 2013, 15:46:04.0
~~~~~~~~~~~~~~~~~~~~~~~

Thanks again for the RUU and I hope someone can give me a confirmation!

 

[OMJ]

I post this in the other RUU thread but this one is newer so maybe I someone who knows will see. I'm wondering if it's safe to following the instructions in the original thread if my phones bootloader says this -

~~~~~~~~~~~~~~~~~~~~~~~
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OS-3.04.651.2
eMMC-boot 2048 MB
Sep 18 2013, 15:46:04.0
~~~~~~~~~~~~~~~~~~~~~~~

Thanks again for the RUU and I hope someone can give me a confirmation!

since you're s-on, I believe you will need to lock first, then you can run the RUU

using fastboot, type this cmd: fastboot oem lock this will relock the bootloader

 

[D3luSi0n4L]

EDIT / UPDATE ~ Ok so I said screw it and just ran the RUU after it did what I detailed below. It went ahead and ran fine, I'm booted into stock I guess the only downside is in the bootloader it'll say TAMPERED but that's not a big deal. I hope with it saying tampered I can go ahead and receive OTA's, if anyone knows and can confirm I'd appreciate it!


You sir are the man, thank you very much - gonna give it a go right now.

---------- Post added at 09:56 AM ---------- Previous post was at 09:46 AM ----------

since you're s-on, I believe you will need to lock first, then you can run the RUU

using fastboot, type this cmd: fastboot oem lock this will relock the bootloader

You sir are the man, thank you very much - gonna give it a go right now.

Ok so I tried using the fastboot oem lock and this is what happened ~

<bootloader> lock successfully...
<bootloader> mipi display off
<bootloader> mipi_dsi_cmds_tx_ext
<bootloader> pm8921_vreg_disable function, vreg_id = 38
<bootloader> pm8921_vreg_disable function, vreg_id = 1
<bootloader> TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
<bootloader> Use PSHOLD to reset device.
FAILED <status read failed <Too many links>>
Finished. total time: 1.179s

When I ran it the screen went black and the came back to the bootloader at fastboot and now the tops says ----

***TAMPERED***
***RELOCKED***
***SECURITY WARNING***

with the same stuff below it as last time (s-on, hboot 1.55.0000, etc) - Do I just keep it in bootloader and run the RUU now? Also it says 1. Turn on your android phone and connect it to your PC using the usb cable provided. Does that mean I should reboot from the bootloader and just go to my homescreen? Will this be a problem if my bootloader is now locked?

Thanks!

 

[androidforeve]

Sorry for the noob question not sure where to ask it but if im s -on does that mean I can't flash new radios specially with kit Kat update coming soon I have latest radio and firmware because I unlocked after latest update but was not once kit Kat update rolls out with new radios and firmware not sure if I was going to be stuck because I'm s -on

Sent from my HTCONE using xda app-developers app

 

[PillowMetal]

Does that mean I should reboot from the bootloader and just go to my homescreen? Will this be a problem if my bootloader is now locked?

Thanks!

You are now locked and the RUU will complete successfully. Reboot the phone normally to the home screen, connect your USB cable, optionally verify your connection with "adb devices", run the RUU and follow the directions.

---------- Post added at 12:54 PM ---------- Previous post was at 12:46 PM ----------

Sorry for the noob question not sure where to ask it but if im s -on does that mean I can't flash new radios specially with kit Kat update coming soon I have latest radio and firmware because I unlocked after latest update but was not once kit Kat update rolls out with new radios and firmware not sure if I was going to be stuck because I'm s -on

Sent from my HTCONE using xda app-developers app

Because you are S-ON you can't flash firmware alone unless it is a signed package from HTC. If you go back to stock recovery and ROM you can take the OTA for Kit Kat, or just flash stock recovery and run the RUU. Both options will require you to lock the bootloader first.

If you don't want to do all that, you can wait for a developer to come out with a Kit Kat ROM, but it will not include a firmware update.

You may be able to flash the firmware update if extracted (firmware.zip) from the OTA, not sure because I am S-OFF and don't have to deal with any of this.

I also understand that you may be able to flash an extracted radio image individually via fastboot, but this will not include all the other partitions that will get updated for Kit Kat.

 

[androidforeve]

You are now locked and the RUU will complete successfully. Reboot the phone normally to the home screen, connect your USB cable, optionally verify your connection with "adb devices", run the RUU and follow the directions.

---------- Post added at 12:54 PM ---------- Previous post was at 12:46 PM ----------



Because you are S-ON you can't flash firmware alone unless it is a signed package from HTC. If you go back to stock recovery and ROM you can take the OTA for Kit Kat, or just flash stock recovery and run the RUU. Both options will require you to lock the bootloader first.

If you don't want to do all that, you can wait for a developer to come out with a Kit Kat ROM, but it will not include a firmware update.

You may be able to flash the firmware update if extracted (firmware.zip) from the OTA, not sure because I am S-OFF and don't have to deal with any of this.

I also understand that you may be able to flash an extracted radio image individually via fastboot, but this will not include all the other partitions that will get updated for Kit Kat.

Thanks for the input I don't know how to go s-off so hopefully there will be a way I'm assuming I won't be able to run kit Kat roms without updating radios or firmware

Sent from my HTCONE using xda app-developers app

 

[awdlexusis]

Having problems flashing this through command.any way I can flash the firmware and h boot through bootloader?

 

[benny3]

Thanks for the input I don't know how to go s-off so hopefully there will be a way I'm assuming I won't be able to run kit Kat roms without updating radios or firmware

Sent from my HTCONE using xda app-developers app

I think BD sent you a PM about going s-off. Follow his instructions and your in good hands

---------- Post added at 10:18 PM ---------- Previous post was at 10:02 PM ----------

Having problems flashing this through command.any way I can flash the firmware and h boot through bootloader?

Yes you can, here is a very good guide and follow it, Ask before you do anything that you are not sure about.

http://forum.xda-developers.com/showthread.php?t=2251800

 

[androidforeve]

I think BD sent you a PM about going s-off. Follow his instructions and your in good hands

---------- Post added at 10:18 PM ---------- Previous post was at 10:02 PM ----------



Yes you can, here is a very good guide and follow it, Ask before you do anything that you are not sure about.

http://forum.xda-developers.com/showthread.php?t=2251800

Yes he did

Sent from my HTCONE using xda app-developers app

 

[maniakx]

Here we have the RUU for the Sprint HTC One 3.05.651.6!!! This RUU is for the Sprint One ONLY to restore your phone back to stock. You MUST relock your bootloader prior to using this RUU.

Thx niketom843 for the link!!!


How to use:

-boot into bootloader (various ways)
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-Download from HTC http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe
-from pc, run the RUU exe, follow instructions


DEVs, here is the Decrypted version!

Sprint_HTC_One_m7wls_3.05.651.6_RUU_decrypted.zip



Here is the extracted Firmware:


Full unmodified Firmware (fastboot flashable): http://www.androidfilehost.com/?fid=23311191640114124

Full Firmware w/o hboot, boot, recovery (fastboot flashable): http://www.androidfilehost.com/?fid=23311191640114131

Radio only (TWRP flashable): http://www.androidfilehost.com/?fid=23311191640114111


some basic instructions for flashing the modified firmware....

-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type Fastboot oem rebootRUU
-when u see the black screen w/ HTC, type Fastboot flash zip firmware.zip
-when it's done, type Fastboot reboot

I am S-on can I flash the modified (fast boot flashable) with the instructions you added?

-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type Fastboot oem rebootRUU
-when u see the black screen w/ HTC, type Fastboot flash zip firmware.zip
-when it's done, type Fastboot reboot

im on linux so dont use the win executable ruu. I really just want the latest radio and firmware for best performance on your bad boys rom, thanks