[S-20 Series_Snapdragon]-[Upgrade A13 Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]

[jrkruse]

Must Have An Unlocked Bootloader To Do This!

This A full stock firmware file I have created to flash with odin to automatically install TWRP recovery along with Disable VBMETA image. The Userdata _AIO tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!​

Downloads
SM-G981U/U1/W- Model

G981USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock

SM-G986U/U1/W- Model

G986USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock

SM-G988U/U1/W- Model

G988USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock

Odin3_v3.14.1_3B_PatcheD.zip

TWRP Recovery Provide by @afaneh92

Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

Install Instructions
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.

2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631

3. Use patched 3.14 odin and load files in appropriate odin slots

4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup


Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working


Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
markfm For Bitsafe Firmware

Source For Userdata AIO

 

[jrkruse]

Info For U Model Bootloader Unlocking Can Be Found

[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices

This thread is @svetius approved Be careful guys, someone pretending to be me with my name, my telegram username is @afaneh92 dont get yourself scammed Important notice: If you are already updated post February 2021, do not update to April 2023...

forum.xda-developers.com

Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version

Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7

 

[jhr5474]

Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!

 

[jrkruse]

Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!

I dont have s20 so Im limited what I can make

 

[jrkruse]

If tokens can be updated to flash higher bootloaders then I will adjust files accordingly

 

[Misterxtc]

This works great! I flashed the entire U1 DUB7 update with the force wipe with BL files in the USERDATA slot. Everything went well.

 

[scepz]

Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol

 

[jrkruse]

Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol

So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them

 

[scepz]

So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them

Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.

 

[jrkruse]

Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.

Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files

 

[scepz]

Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files

I tried with just your user data file still didn't work. So your saying next time use all files besides BL?

 

[jrkruse]

I tried with just your user data file still didn't work. So your saying next time use all files besides BL?

I'll make a specific one for sm-g981v

 

[scepz]

I'll make a specific one for sm-g981v

Ok

 

[jrkruse]

Ok

files in the OP

 

[Gianni's]

Must Have An Unlocked Bootloader To Do This!

This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

Info For Bootloader Unlocks Can Be Found In Post 2​

Downloads
SM-G981U/U1/W- Model

These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G981_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G981_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

SM-G981V- Model

These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981V_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G981V_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981V_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G981V_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

SM-G986U/U1/W- Model

These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G986_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G986_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware


These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G986_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G986_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

SM-G988U/U1/W- Model

These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G988_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G988_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware


These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G988_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G988_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

Odin3_v3.14.1_3B_PatcheD.zip

TWRP Recovery Provide by @afaneh92

Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

Install Instructions For Newly Unlocked Devices

You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.

2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631

3. Use patched 3.14 odin and load file USERDATA_SLOT_G98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup

Install Instructions For Updating Firmware On Phone Already Unlocked

1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_G98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not

Install Instructions If Updating Images With TWRP

1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

2. Use patched 3.14 odin and load file USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2

Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working


Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff

Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware

Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware

All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.

www.sammobile.com

 

[jrkruse]

Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware

Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware

All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.

www.sammobile.com

The ones without bootloaders will work. The NO_BL ones. Probably have to use the force wipe one

 

[rlewis312010]

So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:

1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?

 

[reV17]

So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:

1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?

I did it that way, used the BL included file and flashed all the stock files, after the full wipe everything that I needed was included. Worked great, on UI 3.1 rn

 

[rlewis312010]

It worked for me also, thanks for making this.

 

[mysticjp]

hi jrkruse i just got an A71 5g unlocked (thanks afaneh92), and i was wondering if you could make an aio userdata file for it? so i can flash ui 3.1 firmware to it? like this for my s20 ultra..(this thread)