[S-OFF] revone - DEVELOPER EARLY ACCESS PREVIEW EDITION

RuckusDecay

Senior Member
May 22, 2012
392
83
0
Los Angeles
T-mobile running ViperOne 2.1 and I the bootloader says the date is may 3 2013. I never ran any updates on the phone because i know that usually kills exploits.
Well okay then hboot is good just go back to the stock ROM .8 should do it because its 4.1 you can't run it on 4.2 good luck.

Sent from my HTC One using Tapatalk 4

---------- Post added at 09:52 PM ---------- Previous post was at 09:50 PM ----------

I updated my T-Mobile htc one to firmware .11 frm .8, can I still get s-off using this method? Thanks

Sent from my Nexus 7 using Tapatalk 4
You have to downgrade because the exploit has been cover up. So go to rootzwiki forum and look for the downgrade method for T-Mobile thread.

Sent from my HTC One using Tapatalk 4
 

psychomaniac189

Senior Member
Feb 27, 2009
1,004
157
63
34
Wisconsin
Well okay then hboot is good just go back to the stock ROM .8 should do it because its 4.1 you can't run it on 4.2 good luck.

Sent from my HTC One using Tapatalk 4

---------- Post added at 09:52 PM ---------- Previous post was at 09:50 PM ----------



You have to downgrade because the exploit has been cover up. So go to rootzwiki forum and look for the downgrade method for T-Mobile thread.

Sent from my HTC One using Tapatalk 4
so i have to downgrade to .8 and then s off from the stock os?
 
  • Like
Reactions: ItsMeMasih

ItsMeMasih

Senior Member
Jan 16, 2011
177
9
0
Orange County
Only if you have a recent update... in which case you are currently not going to achieve S-OFF. The easiest way to tell without going into the bootloader is to run revone... it will segmentation fault if Motochopper fails. Even worse, if it seg faults, you can't currently use revone. Even if you go through HTC Dev and get your code, you will most likely get error -6. An update is coming for the 1.44 patched hboots... 1.54 hboots will be waiting awhile because they are encrypted.

---------- Post added at 11:13 AM ---------- Previous post was at 11:07 AM ----------



This model isn't like other models. S-OFF is not achieved through radio... there is no ENG S-OFF, radio S-OFF, etc required anymore.

S-OFF is achieved through an hboot hack... and even beyond that, if you are willing to go through HTCDev, you have a lot more freedom with S-ON and an unlocked bootloader than you did before.

You still need S-OFF for certain functions but HTC has let a bootloader unlock give you everything S-OFF would do ... except for a few key points. You can't gain SuperCID and you can't cover your tracks... Nor can you flash firmware that isn't signed for your device or modify your MID...

If you just want to flash ROMs or radios, you can do so with S-ON... If you want further control, you need S-OFF.

The only reason I believe I need S-OFF is to flash custom boot splash screens. Is this correct? If not, I'm perfectly happy with S-ON.
 

horsetastic

Senior Member
Jun 6, 2011
2,478
1,301
113
Isle of Wight, UK
OMFG!

Seriously people. How can so many of you not read!! Let me make this more obvious for everyone that can't be bothered to read before posting that they can't S-Off for whatever reason.

You should/can only use revone to S-Off if;-

1. You are on or flash a STOCK Sense 5, Android 4.1 ROM

2. Have an old un-patched 1.44 HBoot or If on T-Mob or AT&T and on Patched 1.44 HBoot You can Downgrade using one of the easy to find guides provided

3. Use the up to date 0.2.1 revone (the older ones give false successes)

4. Are Rooted (Not necessary but seems to improve chances of success)

5. Are not using a 4.2 ROM

6. Are not using a GE ROM

7. Are not on HBoot 1.54

8. Are not on HBoot 1.54

9. ARE NOT ON HBOOT 1.54

10. Are not an Idiot!

Some of these may not apply but if you want to garuntee revone working then you should follow these rules! Also in addition to this. READ THE OP and POST 2! They are your revone bible and will tell you what to do.

Notes on Error codes (from my experience, and what I've read!);-

Error Code -1 = Potentially you need to try a different ROM or it could just be random and after a few tries and reboots it might work. A few people have reported that rebooting and useing -p rather than -P has worked but I'm not convinced as -p isn't built as a command but you're free to try whatever you wish.

Error Code -2 = I've seen people report this but revone has actually worked so should you see this try and reboot and carry on, if not then try changing ROMs and try again.

Error Code -6 = More then likely you're on either a patched or a 1.54 HBoot and you're not going to be able to S-Off. If you reboot to bootloader and you're on 1.44 then you might be able to downgrade using one of the guides on xda. Xboarder's guide on rootzwiki for TMob is a good one.

Error Code 1 = I've had this myself and this basically means it's not ever going to work. I think it's a variant on the -6 Error. If you see this, you're out of luck IMO.
 

donmarkoni

Senior Member
Sep 21, 2010
1,817
2,164
153
Belgrade
OMFG!
Seriously people. How can so many of you not read!! Let me make this more obvious for everyone that can't be bothered to read before posting that they can't S-Off for whatever reason.
You should/can only use revone to S-Off if;-
1. You are on or flash a STOCK Sense 5, Android 4.1 ROM
2. Have an old un-patched 1.44 HBoot or If on T-Mob or AT&T and on Patched 1.44 HBoot You can Downgrade using one of the easy to find guides provided
3. Use the up to date 0.2.1 revone (the older ones give false successes)
4. Are Rooted (Not necessary but seems to improve chances of success)
5. Are not using a 4.2 ROM
6. Are not using a GE ROM
7. Are not on HBoot 1.54
8. Are not on HBoot 1.54
9. ARE NOT ON HBOOT 1.54
10. Are not an Idiot!
Some of these may not apply but if you want to garuntee revone working then you should follow these rules! Also in addition to this. READ THE OP and POST 2! They are your revone bible and will tell you what to do.
...
Hahaha... :laugh: That is what I call a guide! :highfive: Point 10 is my favorite!

But there is a paradox in it... An idiot would hardly recognize self as one. ;)
 

runganwt

Senior Member
Sep 3, 2008
447
130
0
Bangkok TH
OMFG!

Seriously people. How can so many of you not read!! Let me make this more obvious for everyone that can't be bothered to read before posting that they can't S-Off for whatever reason.

You should/can only use revone to S-Off if;-

1. You are on or flash a STOCK Sense 5, Android 4.1 ROM

2. Have an old un-patched 1.44 HBoot or If on T-Mob or AT&T and on Patched 1.44 HBoot You can Downgrade using one of the easy to find guides provided

3. Use the up to date 0.2.1 revone (the older ones give false successes)

4. Are Rooted (Not necessary but seems to improve chances of success)

5. Are not using a 4.2 ROM

6. Are not using a GE ROM

7. Are not on HBoot 1.54

8. Are not on HBoot 1.54

9. ARE NOT ON HBOOT 1.54

10. Are not an Idiot!

Some of these may not apply but if you want to garuntee revone working then you should follow these rules! Also in addition to this. READ THE OP and POST 2! They are your revone bible and will tell you what to do.

Notes on Error codes (from my experience, and what I've read!);-

Error Code -1 = Potentially you need to try a different ROM or it could just be random and after a few tries and reboots it might work. A few people have reported that rebooting and useing -p rather than -P has worked but I'm not convinced as -p isn't built as a command but you're free to try whatever you wish.

Error Code -2 = I've seen people report this but revone has actually worked so should you see this try and reboot and carry on, if not then try changing ROMs and try again.

Error Code -6 = More then likely you're on either a patched or a 1.54 HBoot and you're not going to be able to S-Off. If you reboot to bootloader and you're on 1.44 then you might be able to downgrade using one of the guides on xda. Xboarder's guide on rootzwiki for TMob is a good one.

Error Code 1 = I've had this myself and this basically means it's not ever going to work. I think it's a variant on the -6 Error. If you see this, you're out of luck IMO.
Also Added: Do not even come out with excuses that there is too many pages to read.!!! Yes, because people like you keep posting the same question over and over without reading it first. So it'd made the thread got this many pages.
 

horsetastic

Senior Member
Jun 6, 2011
2,478
1,301
113
Isle of Wight, UK
Hahaha... :laugh: That is what I call a guide! :highfive: Point 10 is my favorite!

But there is a paradox in it... An idiot would hardly recognize self as one. ;)
LOL Cheers. That's also very true..... I am getting so annoyed reading peoples questions on here though. I'm getting this error, that error, will this work for hboot 1.54, i'm on 1.44 but getting error code -6. It's like, can you really not do any research yourself? You're really trying to S-Off your phone when you either don't know enough about your phone to be doing such a thing in the first place or can't even use Google search to find answers for yourself?!

---------- Post added at 09:25 AM ---------- Previous post was at 09:23 AM ----------

Also Added: Do not even come out with excuses that there is too many pages to read.!!! Yes, because people like you keep posting the same question over and over without reading it first. So it'd made the thread got this many pages.
So true! The search function works well, so does google! I found xboarders downgrade for tmobile users using google search. I typed in hboot downgrade htc one and like some kind of insane magic it was there!
 

lomo2002

Senior Member
Oct 5, 2007
291
4
0
hi guys,
I have just bought a ONE with factory/stock rom. I have successfully S-OFF, as I used the command "./revone -s 0 -u", I guess the bootloader is also unlocked. I installed CWM and did a backup. Then I installed a Recovery.img. I restarted the phone and it started downloading the 4.2.2, but when it install, it stuck after may be 15%.
My questions are, is it because of the wrong Recovery.img? or should I lock the bootloader, so OTA to be installed succesfully? if I lock the bootloader, which command should I use, "./revone -l" or "./revone -r", do they have any special feature or it is only a flag thing, LOCKED and RELOCKED.
 

Gerton

Senior Member
Nov 16, 2009
731
120
0
Don't think this question belongs here but, did u flash the right recovery.img for your firmware?

Sent from my HTC One X using xda app-developers app
 

Reilly9

Senior Member
Jul 21, 2013
117
20
0
Armagh
I'm having some trouble with S-Off. I keeping getting error code 1 after (./revone -P) Command. I'm running with SU. Could it be that I'm running on 4.3?
 

lomo2002

Senior Member
Oct 5, 2007
291
4
0
Don't think this question belongs here but, did u flash the right recovery.img for your firmware?
Sent from my HTC One X using xda app-developers app
My be you right, my CID is HTC-Y13. My One has stock nordic european rom, software no. 1.29.401.16. I searched the forum, but I could not find any recovery.img for that. I read in one of the threads that recovery.img are the same, but after a few tests, I found they are not the same, because they have different sizes. I tried those Recovery.img that I found, most of them approximately go up to 15% and stuck, others stop at beginning and show the typical error sign (red trangle). I do not know, whether it is because of the recovery.img or the unlocked bootloader:(
 

runganwt

Senior Member
Sep 3, 2008
447
130
0
Bangkok TH
hi guys,
I have just bought a ONE with factory/stock rom. I have successfully S-OFF, as I used the command "./revone -s 0 -u", I guess the bootloader is also unlocked. I installed CWM and did a backup. Then I installed a Recovery.img. I restarted the phone and it started downloading the 4.2.2, but when it install, it stuck after may be 15%.
My questions are, is it because of the wrong Recovery.img? or should I lock the bootloader, so OTA to be installed succesfully? if I lock the bootloader, which command should I use, "./revone -l" or "./revone -r", do they have any special feature or it is only a flag thing, LOCKED and RELOCKED.
With command ./revone -s 0 -u so "-s 0" means set secureflag to 0 = security off and "-u" means unlock bootloader which opposite to "-l" means lock bootloader.

Sent from my HTC One using XDA Premium HD app
 

RuckusDecay

Senior Member
May 22, 2012
392
83
0
Los Angeles
OMFG!

Seriously people. How can so many of you not read!! Let me make this more obvious for everyone that can't be bothered to read before posting that they can't S-Off for whatever reason.

You should/can only use revone to S-Off if;-

1. You are on or flash a STOCK Sense 5, Android 4.1 ROM

2. Have an old un-patched 1.44 HBoot or If on T-Mob or AT&T and on Patched 1.44 HBoot You can Downgrade using one of the easy to find guides provided

3. Use the up to date 0.2.1 revone (the older ones give false successes)

4. Are Rooted (Not necessary but seems to improve chances of success)

5. Are not using a 4.2 ROM

6. Are not using a GE ROM

7. Are not on HBoot 1.54

8. Are not on HBoot 1.54

9. ARE NOT ON HBOOT 1.54

10. Are not an Idiot!

Some of these may not apply but if you want to garuntee revone working then you should follow these rules! Also in addition to this. READ THE OP and POST 2! They are your revone bible and will tell you what to do.

Notes on Error codes (from my experience, and what I've read!);-

Error Code -1 = Potentially you need to try a different ROM or it could just be random and after a few tries and reboots it might work. A few people have reported that rebooting and useing -p rather than -P has worked but I'm not convinced as -p isn't built as a command but you're free to try whatever you wish.

Error Code -2 = I've seen people report this but revone has actually worked so should you see this try and reboot and carry on, if not then try changing ROMs and try again.

Error Code -6 = More then likely you're on either a patched or a 1.54 HBoot and you're not going to be able to S-Off. If you reboot to bootloader and you're on 1.44 then you might be able to downgrade using one of the guides on xda. Xboarder's guide on rootzwiki for TMob is a good one.

Error Code 1 = I've had this myself and this basically means it's not ever going to work. I think it's a variant on the -6 Error. If you see this, you're out of luck IMO.
Just because "people" seem to miss it bumping it hope a mod can added it to the OP with big red color.

Sent from my HTC One using Tapatalk 4
 
  • Like
Reactions: horsetastic