S150 - Android head unit

Search This thread

np27np27

Senior Member
Feb 25, 2009
161
13
Hi, did you get any solution? If yes, please reply it.
I'll try to install new apks from third party "repository" eg. google store, play services...
Like I said, deleting the account worked for me on my tablet. My s150 did not have the problem so i have not tried.

Sent from my IRON using Tapatalk
 

kbattpo

Member
Aug 12, 2009
7
0
Philadelphia
A new problem with Kotix Rom 2.3
I installed Igo.Everything work good but if i install a skin (Dimka,Gja etc), when IGO load the skin i get this message: "Battery level is critically low.Please recharge the battery".Then Igo freeze.

Delete the "power.zip" file from the "UX" folder and this will stop. It took me several hours of research to find out what's been causing this annoying problem.
 

maraca

Senior Member
Jan 19, 2007
119
13
Delete the "power.zip" file from the "UX" folder and this will stop. It took me several hours of research to find out what's been causing this annoying problem.

exellent tip!, anyone know why sometimes settings is deleted or factory default presets appears when turn off and turn on the system?
regards
 

pz_sthlm

New member
May 5, 2016
1
0
CanBus Fail

before making the updates to 4.03, the steering wheel controls work properly

I got the same problem :(

---------- Post added at 10:20 PM ---------- Previous post was at 10:15 PM ----------

before making the updates to 4.03, the steering wheel controls work properly

After upgrade to 4.0.3 CanBus Fail and Wifi isnt working.....

...am i the only one with these problems?
 

fromaron

Senior Member
May 10, 2010
214
37
IGO problem - Please help

I can see a lot of users managed to install IGO Primo successfully on S150 Android 4.03.

No matter what I do I can't get rid of the "Looking for GPS" status. My location is updating on the map when my car is moving but I cannot use guided navigation as there is no GPS lock.
I have 8-10 satellites with strong signals visible but still Accuracy is reported as NONE.
I read people put sys.txt settings to fix the problem. From what I found so far the suggested sys.txt doesn't work for me.
Can anyone please look at my sys.txt file (attached) and spot the problem? I will also appreciate if someone can confirm S150 is using the SD card in the GPS slot after installation and doesn't copy the settings and sys file to internal memory somewhere.

Thank you for reading and hope someone can help.
 

Attachments

  • Sys.txt
    793 bytes · Views: 68

TvBIFI

Senior Member
Apr 27, 2008
116
46
No matter what I do I can't get rid of the "Looking for GPS" status. My location is updating on the map when my car is moving but I cannot use guided navigation as there is no GPS lock.

Thank you for reading and hope someone can help.

Try this sys.txt content
This is working on my Unit

If its not working delete the Save folder
 

Attachments

  • sys.txt
    13.6 KB · Views: 108
  • Like
Reactions: fromaron

TvBIFI

Senior Member
Apr 27, 2008
116
46
Thanks for the sys.txt file. I was using iGo Israel and that wasn't locking my position.
Now I use iGo primo and it works Ok.

One more question. I noticed you have TTS enabled in your sys file. Do you use TTS and if yes, which iGo version do you have?

Well both Basarsft and Igo ISR is working for me
Im just using Igo ISR 9.6.29.636868
Ive tested TTS and its slowing down that machine.
 
  • Like
Reactions: fromaron

manuellatif

Member
Dec 26, 2013
31
0
hey Kotix,
first of all once more thanks for all your work.

One short question.
I noticed you have a new rom available from April.
Now i wanted to update and i downlaoded the KoTiX_ROM_20.04.2016_Aroma_Reloaded_3.1.rar,
since i already have your prev. rom installed, can i simply put all files on sd and reboot in order to update or do i have to take care concerning MCU or any other details?
My MCU/Orig Firmware is : I024 Hyundai I30 Manual AC

Would be great if you could shortly let me know.
Thanks in advance and have a great day.
 

KoTiX2

Senior Member
Jul 10, 2010
2,927
1,938
Realme GT
hey Kotix,
first of all once more thanks for all your work.

One short question.
I noticed you have a new rom available from April.
Now i wanted to update and i downlaoded the KoTiX_ROM_20.04.2016_Aroma_Reloaded_3.1.rar,
since i already have your prev. rom installed, can i simply put all files on sd and reboot in order to update or do i have to take care concerning MCU or any other details?
My MCU/Orig Firmware is : I024 Hyundai I30 Manual AC

Would be great if you could shortly let me know.
Thanks in advance and have a great day.
You always have to add your config folder and MCU. All the rest is included in the aroma installer.
;)
 

manuellatif

Member
Dec 26, 2013
31
0
You always have to add your config folder and MCU. All the rest is included in the aroma installer.
;)

Thanks a lot for your info,
I just updated and all is fine.

Just one short question.
I downloaded my phonebook via blutooth (from Iphone 5S), and i can see all my contacts in the list on the RNS.
But when i receive a call it only shows "UNKNOWN" and the Phone number, even though i find this contact in the RNS available.

Also, how can i make the Music Titles played via Blutooth show up in the display?
Here also it only shows "Unknown" For Title Artist and Album, even though the files are correctly ID tagged
On the screens of your blog, i saw that it is showing yout titles correctly?

Also I just installed iGO_9.6.29.483387 but unfortunately i still have the same issue that it finds the GPS but keeps searching for GPS.
Therefore it shows my position but the navigation to a specific address does not work as it keeps searching for GPS.
Is there any fix for those issues?

Thanks in advance for your kind effort and support.
 
Last edited:

KoTiX2

Senior Member
Jul 10, 2010
2,927
1,938
Realme GT
Thanks a lot for your info,
I just updated and all is fine.

Just one short question.
I downloaded my phonebook via blutooth (from Iphone 5S), and i can see all my contacts in the list on the RNS.
But when i receive a call it only shows "UNKNOWN" and the Phone number, even though i find this contact in the RNS available.

Also, how can i make the Music Titles played via Blutooth show up in the display?
Here also it only shows "Unknown" For Title Artist and Album, even though the files are correctly ID tagged
On the screens of your blog, i saw that it is showing yout titles correctly?



Thanks in advance for your kind effort and support.

The BT call issue is a common problem never solved by the manufacturer.
The music tags are shown only if you have the new type of motherboard with DSP.
You probably don't have that board.

Sent from my phone using the send button.

---------- Post added at 12:46 AM ---------- Previous post was at 12:45 AM ----------

Hi Kotix,

It is possible to remove the radio.apk from rom s160 and put in rom s150?

Thank you

No, they are not compatible.

Sent from my phone using the send button.
 

manuellatif

Member
Dec 26, 2013
31
0
Hey Kotix,
thanks for your reply.

Im just wondering, because before the update to android 4, phonecalls have been working correctly and it showed me the right names.
So it must be a sofware issue and not hardware.
 

BassamKassem

Senior Member
Dec 24, 2014
159
70
Cairo
Convert S150 i802 Android 4.03 to Wince

Using the amazing help of @kotix i managed to convert my i802 S150 from Android 4.03 to WinCE 6 using S100 C802 firmware. Everything went amazing and everything works flowlessly and supper fast without bugs even iGO8 and iGO Primo and steering wheel buttons but the only thing needs fixing is the back button located in the unit itself is not performing a back action it pauses and resumes the running song i think this is due to the ADSet. Xml file so if any OK ne can provide me with this file from C802 S100 i would be greatful .

Here are snapshots from the unit before and after the conversion.

Regards
Bassam
 

Attachments

  • 3badf04d5c25510bcbdecb1762b92518.image.456x304.jpg
    3badf04d5c25510bcbdecb1762b92518.image.456x304.jpg
    28.9 KB · Views: 200
  • ef3e7e1d7190e3e4ebc083ebd08c8a2f.image.200x133.jpg
    ef3e7e1d7190e3e4ebc083ebd08c8a2f.image.200x133.jpg
    8.1 KB · Views: 195
Last edited:

BassamKassem

Senior Member
Dec 24, 2014
159
70
Cairo
Yep that seemed to have done it. I got it all up and running. Thank you everyone for the assistance.

Just a quick question.. I quick to turn wifi on and it doesn't do anything.. it just freezes.. what do we do there?

Hey man. Can you send me the original ADSet.Xml file from the wince firmware from your C802 unit cause i need it urgently plz

Regards
Bassam
 
Last edited:

lvfmc85

Member
Jun 18, 2016
7
0
Thanks for the sys.txt file. I was using iGo Israel and that wasn't locking my position.
Now I use iGo primo and it works Ok.

One more question. I noticed you have TTS enabled in your sys file. Do you use TTS and if yes, which iGo version do you have?

Hi fromaron,
I'm trying to use iGO my S150 and I'm failing miserably. Could you send me a link for the iGo primo version you are using? I think I have a issue with my sys.txt file, I tryed to use the one that was posted by TvBIFI, but my iGo just don't want to start. So if you can send me the version you are using or even the web site you downloaded it, you will help me a lot.
Thank you very much.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 15
    WARNING! Very important!
    Anyone who upgraded the firmware from www.carnaviplayer.com and found you got this message :'VID PID Authentication Failed’ or failed. Please contact info@carnaviplayer.com and provide the following info, we will upload another firmware for you guys:
    1. The time when you bought the head unit.
    2. The firmware Build number you upgraded.
    3. A photo of the error image when upgrade.

    We will note down your message and provide new firmware download link on the product webpage ASAP! Please DO NOT send more emails to request firmware every day!




    Hi guys,

    as promised i'm starting a new thread on S150 Android Head Unit made by Roadnav (Winca)
    You can easily come back to original firmware simply using original package posted below

    Android 2.3.4 Firmware for S150

    Boot loader installation instructions
    http://xdaforums.com/attachment.php?attachmentid=2346611&d=1382593371

    Original Firmware installation instructions

    You need Linux and a blank micro sd card
    There are 2 directories in zip file:

    i802_sd_recovery
    SD card instruction

    "SD card instruction" directory contains boot loader and boot loader installation script on SD card.
    You should read readme.txt instructions (it's chinese, however google translate is your friend).

    Then move i802_sd_recovery contents into winca directory on sd card.
    Unmount sd card from your linux workstation and put it in i802 gps slot (left one).
    Turn on i802 unit and update should begin.
    If not, try holding reset and power button with sd card inserted for few secs.

    S150 Original Firmware for I802 (Android 2.3.4, with boot loader installation script)
    http://ul.to/khtg47f2

    S150 Original Firmware for S150 devices (Most updated versions without bootloader)

    Android 2.3 OS Firmware For I802 released.
    Version: 2.3
    Build number: GRJ22.V4.00.00-20131121
    MCU: P002
    FLASH: S00C
    Product page: Android OS Universal Double Din DVD Player Navigation System
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I008 released
    Version: 2.3
    Build number: GRJ22.V4.04.08-20140115
    MCU: B003
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Hyundai Santa Fe
    Check "Hardware & Software" to see the download link.


    Android 2.3 OS Firmware For I018 released.
    Version: 2.3
    Build number: GRJ22.V4.00.00-20131121
    MCU: P002
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Toyota Rav4 2006-2012
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I305 released
    Version: 2.3
    Build number: GRJ22.V4.04.08-20140115
    MCU: B003
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Volkswagen All Series
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I203 released
    Version: 2.3
    Build number: GRJ22.V4.00.00-20131121
    MCU: P002
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Chevrolet Colorado S10
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I052 released
    Version: 2.3
    Build number: GRJ22.V4.00.00-20131121
    MCU: P002
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For BMW E46
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I042 released
    Version: 2.3
    Build number: GRJ22.V4.03.07-20140101
    MCU: A003
    FLASH: S00C
    Product page: Volkswagen Touareg Android OS Car Navigation Player
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I053 released
    Version: 2.3
    Build number: GRJ22.V4.00.00-20131121
    MCU: P002
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Suzuki Grand Vitara
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I087 released
    Version: 2.3
    Build number: GRJ22.V4.04.08-20140115
    MCU: B003
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Smart Fortwo Forfour
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I216 released
    Version: 2.3
    Build number: GRJ22.V4.04.08-20140115
    MCU: B003
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Kia Ceed 2013
    Check "Hardware & Software" to see the download link.

    Android 2.3 OS Firmware For I209 released
    Version: 2.3
    Build number: GRJ22.V4.04.08-20140115
    MCU: B003
    FLASH: S00C
    Product page: Android OS Navigation Radio Player For Hyundai SantaFe ix45
    Check "Hardware & Software" to see the download link.

    Android 4.0 Firmwares for S150

    Android 4.0.3 Beta firmware for S150 (with boot loader installation script)
    http://speedy.sh/zKDwF/make-update-sdcard-S150A.rar

    Android 4.0.3 Final Official firmware for S150 (without boot loader installation script)
    Zipfile includes configs for i802 and I001 model.
    http://ul.to/qirx9mz4


    S100 Original Firmware for S100 WinCe devices

    S100 Wince OS Firmware For C042 released
    Version: 6.0
    OS: S100-UNI.A20140106-A2.1
    APP: S100-V1.0.9.0
    MCU: 000L S00E
    Product page: Volkswagen Touareg Autoradio GPS Navigation S100 Head Unit
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C216 released
    Version: 6.0
    OS: S100-UNI.A20140106-A2.1
    APP: S100-V1.0.9.0
    MCU: 000L S00E
    Product page: Kia Ceed 2013-2014 Aftermarket Navigation DVD Player
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C074 released
    Version: 6.0
    OS: S100-UNI.A20140106-A2.1
    APP: S100-V1.0.9.0
    MCU: 000L S00E
    Product page: Kia Sportage 2011-2014 Aftermarket Navigation DVD Player
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C012 released
    Version:6.0
    OS:S100-UNI.A20131106-V2.0
    APP:S100-V1.4.8.0
    MCU:F00K S00B
    Product page: Mazda 6 2008-2012 Aftermarket Navigation Autoradio
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C045 released
    Version: 6.0
    OS: S100-UNI.A20140106-A2.1
    APP: S100-V1.0.9.0
    MCU: 000L S00E
    Product page: Chevrolet Cruze 2008-2012 Autoradio GPS Navigation Head Unit
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C050 released
    Version:6.0
    OS:S100-UNI.A20140106-A2.1
    APP:S100-V1.1.9.13
    MCU:E00L S00E
    Product page: Audi A4 S4 RS4 2002-2008 Autoradio GPS Navigation Head Unit
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C250 released
    Version: 6.0
    OS: S100-UNI.A20140106-A2.1
    APP: S100-V1.1.9.0
    MCU: E00L S00E
    Product page: Fiat Bravo Aftermarket Navigation Autoradio
    Check "Hardware & Software" to see the download link.

    S100 Wince OS Firmware For C206 released
    Version:6.0
    OS:S100-UNI.A20131219-A2.1
    APP:S100-V1.0.9.0
    MCU:F00K S00B
    Product page: Chrysler 2002-2010 Aftermarket Navigation Car Stereo
    Check "Hardware & Software" to see the download link.

    Share your comments/impressions here!

    Many thanks to Allen Wong from http://www.carnaviplayer.com/ for those firmwares!
    9
    New 2.1 Rom available!!

    I've uploaded the new version of my Aroma 4.03 rom v2.1, download link is at the end of the post.

    First I'd like to thanks the russian developer Dimadina for his 160 DPI mod, the UI looks a lot of better now, the third party apps and the whole UI is not zoomed anymore and it's much better to use. So all credits for this mod goes to him :good:

    From Dimadina rom I also decide to copy the same MCU file becaue the V003 included in the 28/03 original winca fw is not stable and was causing me problems at boot/shutdown of the unit, like taking around 10 seconds to light up the power button before the logo.

    So this is the changelog:

    04.05.2014 - Added Custom Bootanimation option
    30.05.2014 - Fixed Viper Lib installation
    - Changed Aroma resolution to lower dpi
    - Fixed Aroma progress bar
    - Added option to use 160 dpi interface

    I increased the Aroma resolution, so we have more room for cheboxes and the progress bar is kind of working now (need more fixes but it's ok)
    Viper4Android now install without problems, you don't have to install the drivers, just enable it for the speakers.
    If you select 160 DPI mod you can still choose my modded version of the radio and bluetooth apk.
    I added the option to install a bootanimation in "data/local" just put the bootanimation.zip in the "bootanimation" folder, best if you use a "...x480" resolution as the screen size is 800x480, just don't use a 480x800 that is vertical mode.

    If this rom don't have problems, I will stop for a while modding the 4.03 rom and I'll start porting the aroma installer, the modded radio and other mods to the 2.34 fw. With the aroma will be easyer to move to 4.03 and go back to 2.34 without flashing MCU.

    Enjoy ;)

    Kitt.gif


    S150 4.03 Aroma-Root-160DPI_v2.1.rar
    9
    Technical staff of S150 from CarNaviPlayer.com

    Hello, everybody!
    I happened to see this thread today. Glad to see that many members are interest in the S150 Android aftermarket navigation units.
    I am a S150 technical staff from www.CarNaviPlayer.com
    The 2.3 OS is the stablest system at this moment. 4.0 was released recently, there are still some bugs unsolved. Such as it will not display tags when play SD/USB music.
    I can get the latest firmware for all S100, S150(2.3) and S150(4.0). Feel free to contact me if you guys have any questions!
    Check the firmware on product pages on www.CarNaviPlayer.com
    contact me at wanghuies@gmail.com or info@carnaviplayer.com
    9
    S150 Android 4.03 V1.1a rooted latest GAPPS

    Here it is

    S150_Android_4.03_V1.1a_rooted_latest_GAPPS.rar


    Userinstallation like a Normal Phone.
    You Can Set Language, Time and Country at Start.
    no more jumping out of Touchscreen-Calibration.
    ive added new Google Play Services which i leaked out of my Radio after Update - No more Services not Installed bug.
    Kotix Radioapp added.
    Adfree Installed for no adds on S150. u need to activate and DL the host
    Rootuninstaller. Now u Can Delete all unwanted Apps.

    4x Mediaplayers Available
    - Stock Music Player
    - Poweramp
    - Jetaudio
    - MXPlayer

    if u want the new Playstore. update Talk to Hangouts and its still there

    Screenlock bug is there but can be prevented by toogle Stay awake in Development settings.

    dont forget to set the ADSET.XML for Your Device
    Code:
    <DATE>
        <define id="[B][COLOR="Red"]5[/COLOR][/B]" derivativeID="0" name="[B][COLOR="Red"]I005[/COLOR][/B]"/>
        <openLogo id="0"/>
        <LCD id="[B][COLOR="Red"]1[/COLOR][/B]"/>
      </DATE>

    Setting LCD
    Code:
     <LCD id="1"/> ; = 7" Hannstar
     <LCD id="2"/> ; = 6.2" Hannstar
     <LCD id="3"/> ; = 7" Innolux
     <LCD id="4"/> ; = 8" Innolux
     <LCD id="5"/> ; = 8" Hannstar
     <LCD id="6"/> ; = 5" Hannstar
     <LCD id="7"/> ; = 9" Innolux
     <LCD id="8"/> ; = 4.3" Innolux
     <LCD id="9"/> ; = 6.95" Tianma
    8
    @TvBIFI Replace launcher2.apk with original one from official 4.03.

    @all using my rooted roms
    I made a little mod to the radio interface to have a bigger Station RDS name and a quite bigger buttons on side of the slider:
    2014_02_14_18_11_49.jpg


    This is the link to the modified apk:
    https://www.dropbox.com/s/qt5vtds9sdtvjpa/RadioPlayer.apk

    Use root explorer to replace the one in the System\app folder and reboot.

    I hope you like it :)